IXP4xx: move NSLU2 platform macros to the platform code.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>

arch/arm/mach-ixp4xx/include/mach/hardware.h

@@ -45,7 +45,6 @@
 
 /* Platform specific details */
 #include "prpmc1100.h"
-#include "nslu2.h"
 #include "nas100d.h"
 #include "dsmg600.h"
 #include "fsg.h"

arch/arm/mach-ixp4xx/include/mach/irqs.h

@@ -78,13 +78,6 @@
 #define	IRQ_PRPMC1100_PCI_INTC	IRQ_IXP4XX_GPIO9
 #define	IRQ_PRPMC1100_PCI_INTD	IRQ_IXP4XX_GPIO8
 
-/*
- * NSLU2 board IRQs
- */
-#define        IRQ_NSLU2_PCI_INTA      IRQ_IXP4XX_GPIO11
-#define        IRQ_NSLU2_PCI_INTB      IRQ_IXP4XX_GPIO10
-#define        IRQ_NSLU2_PCI_INTC      IRQ_IXP4XX_GPIO9
-
 /*
  * NAS100D board IRQs
  */

arch/arm/mach-ixp4xx/include/mach/nslu2.h

-/*
- * arch/arm/mach-ixp4xx/include/mach/nslu2.h
- *
- * NSLU2 platform specific definitions
- *
- * Author: Mark Rakes <mrakes AT mac.com>
- * Maintainers: http://www.nslu2-linux.org
- *
- * based on ixdp425.h:
- *	Copyright 2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <mach/hardware.h>"
-#endif
-
-#define NSLU2_SDA_PIN		7
-#define NSLU2_SCL_PIN		6
-
-/*
- * NSLU2 PCI IRQs
- */
-#define NSLU2_PCI_MAX_DEV	3
-#define NSLU2_PCI_IRQ_LINES	3
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define NSLU2_PCI_INTA_PIN	11
-#define NSLU2_PCI_INTB_PIN	10
-#define NSLU2_PCI_INTC_PIN	9
-#define NSLU2_PCI_INTD_PIN	8
-
-/* NSLU2 Timer */
-#define NSLU2_FREQ 66000000
-
-/* Buttons */
-
-#define NSLU2_PB_GPIO		5	/* power button */
-#define NSLU2_PO_GPIO		8	/* power off */
-#define NSLU2_RB_GPIO		12	/* reset button */
-
-/* Buzzer */
-
-#define NSLU2_GPIO_BUZZ		4
-
-/* LEDs */
-
-#define NSLU2_LED_RED_GPIO	0
-#define NSLU2_LED_GRN_GPIO	1
-#define NSLU2_LED_DISK1_GPIO	3
-#define NSLU2_LED_DISK2_GPIO	2

arch/arm/mach-ixp4xx/nslu2-pci.c

@@ -18,10 +18,21 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
+#define NSLU2_PCI_MAX_DEV	3
+#define NSLU2_PCI_IRQ_LINES	3
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define NSLU2_PCI_INTA_PIN	11
+#define NSLU2_PCI_INTB_PIN	10
+#define NSLU2_PCI_INTC_PIN	9
+#define NSLU2_PCI_INTD_PIN	8
+#define IRQ_NSLU2_PCI_INTA      IRQ_IXP4XX_GPIO11
+#define IRQ_NSLU2_PCI_INTB      IRQ_IXP4XX_GPIO10
+#define IRQ_NSLU2_PCI_INTC      IRQ_IXP4XX_GPIO9
+
 void __init nslu2_pci_preinit(void)
 {
 	set_irq_type(IRQ_NSLU2_PCI_INTA, IRQ_TYPE_LEVEL_LOW);

arch/arm/mach-ixp4xx/nslu2-setup.c

@@ -26,13 +26,32 @@
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 #include <linux/io.h>
-
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/time.h>
 #include <asm/gpio.h>
 
+#define NSLU2_SDA_PIN		7
+#define NSLU2_SCL_PIN		6
+
+/* NSLU2 Timer */
+#define NSLU2_FREQ 66000000
+
+/* Buttons */
+#define NSLU2_PB_GPIO		5	/* power button */
+#define NSLU2_PO_GPIO		8	/* power off */
+#define NSLU2_RB_GPIO		12	/* reset button */
+
+/* Buzzer */
+#define NSLU2_GPIO_BUZZ		4
+
+/* LEDs */
+#define NSLU2_LED_RED_GPIO	0
+#define NSLU2_LED_GRN_GPIO	1
+#define NSLU2_LED_DISK1_GPIO	3
+#define NSLU2_LED_DISK2_GPIO	2
+
 static struct flash_platform_data nslu2_flash_data = {
 	.map_name		= "cfi_probe",
 	.width			= 2,