Merge tag 'reset-for-v5.16' of git://git.pengutronix.de/pza/linux into arm/drivers

Reset controller updates for v5.16

Allow building the reset-brcmstb-rescal driver as module, add reset
lines for the Uniphier PXs3 audio and video input subsystems and
bindings for the Uniphier NX1 SoC, and add lan966x switch reset support
to the reset-microchip-sparx5 driver.

* tag 'reset-for-v5.16' of git://git.pengutronix.de/pza/linux:
  reset: mchp: sparx5: Extend support for lan966x
  dt-bindings: reset: Add lan966x support
  reset: uniphier: Add NX1 reset support
  dt-bindings: reset: uniphier: Add NX1 reset control binding
  reset: uniphier: Add audio system and video input reset control for PXs3
  reset: Allow building Broadcom STB RESCAL as module

Link: https://lore.kernel.org/r/96e686f78f0e42bad666df5ec0cbcb2dcdc270a3.camel@pengutronix.deSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/reset/microchip,rst.yaml

@@ -20,7 +20,9 @@ properties:
     pattern: "^reset-controller@[0-9a-f]+$"
 
   compatible:
-    const: microchip,sparx5-switch-reset
+    enum:
+      - microchip,sparx5-switch-reset
+      - microchip,lan966x-switch-reset
 
   reg:
     items:

Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml

@@ -23,6 +23,7 @@ properties:
       - socionext,uniphier-pxs2-usb3-reset
       - socionext,uniphier-ld20-usb3-reset
       - socionext,uniphier-pxs3-usb3-reset
+      - socionext,uniphier-nx1-usb3-reset
       - socionext,uniphier-pro4-ahci-reset
       - socionext,uniphier-pxs2-ahci-reset
       - socionext,uniphier-pxs3-ahci-reset

Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml

@@ -23,6 +23,7 @@ properties:
           - socionext,uniphier-ld11-reset
           - socionext,uniphier-ld20-reset
           - socionext,uniphier-pxs3-reset
+          - socionext,uniphier-nx1-reset
       - description: Media I/O (MIO) reset, SD reset
         enum:
           - socionext,uniphier-ld4-mio-reset
@@ -34,6 +35,7 @@ properties:
           - socionext,uniphier-ld11-sd-reset
           - socionext,uniphier-ld20-sd-reset
           - socionext,uniphier-pxs3-sd-reset
+          - socionext,uniphier-nx1-sd-reset
       - description: Peripheral reset
         enum:
           - socionext,uniphier-ld4-peri-reset
@@ -44,6 +46,7 @@ properties:
           - socionext,uniphier-ld11-peri-reset
           - socionext,uniphier-ld20-peri-reset
           - socionext,uniphier-pxs3-peri-reset
+          - socionext,uniphier-nx1-peri-reset
       - description: Analog signal amplifier reset
         enum:
           - socionext,uniphier-ld11-adamv-reset

drivers/reset/Kconfig

@@ -58,7 +58,7 @@ config RESET_BRCMSTB
 	  a SUN_TOP_CTRL_SW_INIT style controller.
 
 config RESET_BRCMSTB_RESCAL
-	bool "Broadcom STB RESCAL reset controller"
+	tristate "Broadcom STB RESCAL reset controller"
 	depends on HAS_IOMEM
 	depends on ARCH_BRCMSTB || COMPILE_TEST
 	default ARCH_BRCMSTB
@@ -116,7 +116,7 @@ config RESET_LPC18XX
 
 config RESET_MCHP_SPARX5
 	bool "Microchip Sparx5 reset driver"
-	depends on ARCH_SPARX5 || COMPILE_TEST
+	depends on ARCH_SPARX5 || SOC_LAN966 || COMPILE_TEST
 	default y if SPARX5_SWITCH
 	select MFD_SYSCON
 	help

drivers/reset/reset-microchip-sparx5.c

@@ -13,15 +13,18 @@
 #include <linux/regmap.h>
 #include <linux/reset-controller.h>
 
-#define PROTECT_REG    0x84
-#define PROTECT_BIT    BIT(10)
-#define SOFT_RESET_REG 0x00
-#define SOFT_RESET_BIT BIT(1)
+struct reset_props {
+	u32 protect_reg;
+	u32 protect_bit;
+	u32 reset_reg;
+	u32 reset_bit;
+};
 
 struct mchp_reset_context {
 	struct regmap *cpu_ctrl;
 	struct regmap *gcb_ctrl;
 	struct reset_controller_dev rcdev;
+	const struct reset_props *props;
 };
 
 static struct regmap_config sparx5_reset_regmap_config = {
@@ -38,14 +41,16 @@ static int sparx5_switch_reset(struct reset_controller_dev *rcdev,
 	u32 val;
 
 	/* Make sure the core is PROTECTED from reset */
-	regmap_update_bits(ctx->cpu_ctrl, PROTECT_REG, PROTECT_BIT, PROTECT_BIT);
+	regmap_update_bits(ctx->cpu_ctrl, ctx->props->protect_reg,
+			   ctx->props->protect_bit, ctx->props->protect_bit);
 
 	/* Start soft reset */
-	regmap_write(ctx->gcb_ctrl, SOFT_RESET_REG, SOFT_RESET_BIT);
+	regmap_write(ctx->gcb_ctrl, ctx->props->reset_reg,
+		     ctx->props->reset_bit);
 
 	/* Wait for soft reset done */
-	return regmap_read_poll_timeout(ctx->gcb_ctrl, SOFT_RESET_REG, val,
-					(val & SOFT_RESET_BIT) == 0,
+	return regmap_read_poll_timeout(ctx->gcb_ctrl, ctx->props->reset_reg, val,
+					(val & ctx->props->reset_bit) == 0,
 					1, 100);
 }
 
@@ -115,13 +120,32 @@ static int mchp_sparx5_reset_probe(struct platform_device *pdev)
 	ctx->rcdev.nr_resets = 1;
 	ctx->rcdev.ops = &sparx5_reset_ops;
 	ctx->rcdev.of_node = dn;
+	ctx->props = device_get_match_data(&pdev->dev);
 
 	return devm_reset_controller_register(&pdev->dev, &ctx->rcdev);
 }
 
+static const struct reset_props reset_props_sparx5 = {
+	.protect_reg    = 0x84,
+	.protect_bit    = BIT(10),
+	.reset_reg      = 0x0,
+	.reset_bit      = BIT(1),
+};
+
+static const struct reset_props reset_props_lan966x = {
+	.protect_reg    = 0x88,
+	.protect_bit    = BIT(5),
+	.reset_reg      = 0x0,
+	.reset_bit      = BIT(1),
+};
+
 static const struct of_device_id mchp_sparx5_reset_of_match[] = {
 	{
 		.compatible = "microchip,sparx5-switch-reset",
+		.data = &reset_props_sparx5,
+	}, {
+		.compatible = "microchip,lan966x-switch-reset",
+		.data = &reset_props_lan966x,
 	},
 	{ }
 };

drivers/reset/reset-uniphier-glue.c

@@ -155,6 +155,10 @@ static const struct of_device_id uniphier_glue_reset_match[] = {
 		.compatible = "socionext,uniphier-pxs3-usb3-reset",
 		.data = &uniphier_pxs2_data,
 	},
+	{
+		.compatible = "socionext,uniphier-nx1-usb3-reset",
+		.data = &uniphier_pxs2_data,
+	},
 	{
 		.compatible = "socionext,uniphier-pro4-ahci-reset",
 		.data = &uniphier_pro4_data,

drivers/reset/reset-uniphier.c

@@ -136,6 +136,21 @@ static const struct uniphier_reset_data uniphier_pxs3_sys_reset_data[] = {
 	UNIPHIER_RESETX(28, 0x200c, 7),		/* SATA0 */
 	UNIPHIER_RESETX(29, 0x200c, 8),		/* SATA1 */
 	UNIPHIER_RESETX(30, 0x200c, 21),	/* SATA-PHY */
+	UNIPHIER_RESETX(40, 0x2008, 0),		/* AIO */
+	UNIPHIER_RESETX(42, 0x2010, 2),		/* EXIV */
+	UNIPHIER_RESET_END,
+};
+
+static const struct uniphier_reset_data uniphier_nx1_sys_reset_data[] = {
+	UNIPHIER_RESETX(4, 0x2008, 8),		/* eMMC */
+	UNIPHIER_RESETX(6, 0x200c, 0),		/* Ether */
+	UNIPHIER_RESETX(12, 0x200c, 16),        /* USB30 link */
+	UNIPHIER_RESETX(16, 0x200c, 24),        /* USB30-PHY0 */
+	UNIPHIER_RESETX(17, 0x200c, 25),        /* USB30-PHY1 */
+	UNIPHIER_RESETX(18, 0x200c, 26),        /* USB30-PHY2 */
+	UNIPHIER_RESETX(24, 0x200c, 8),         /* PCIe */
+	UNIPHIER_RESETX(52, 0x2010, 0),         /* VOC */
+	UNIPHIER_RESETX(58, 0x2010, 8),         /* HDMI-Tx */
 	UNIPHIER_RESET_END,
 };
 
@@ -400,6 +415,10 @@ static const struct of_device_id uniphier_reset_match[] = {
 		.compatible = "socionext,uniphier-pxs3-reset",
 		.data = uniphier_pxs3_sys_reset_data,
 	},
+	{
+		.compatible = "socionext,uniphier-nx1-reset",
+		.data = uniphier_nx1_sys_reset_data,
+	},
 	/* Media I/O reset, SD reset */
 	{
 		.compatible = "socionext,uniphier-ld4-mio-reset",
@@ -437,6 +456,10 @@ static const struct of_device_id uniphier_reset_match[] = {
 		.compatible = "socionext,uniphier-pxs3-sd-reset",
 		.data = uniphier_pro5_sd_reset_data,
 	},
+	{
+		.compatible = "socionext,uniphier-nx1-sd-reset",
+		.data = uniphier_pro5_sd_reset_data,
+	},
 	/* Peripheral reset */
 	{
 		.compatible = "socionext,uniphier-ld4-peri-reset",
@@ -470,6 +493,10 @@ static const struct of_device_id uniphier_reset_match[] = {
 		.compatible = "socionext,uniphier-pxs3-peri-reset",
 		.data = uniphier_pro4_peri_reset_data,
 	},
+	{
+		.compatible = "socionext,uniphier-nx1-peri-reset",
+		.data = uniphier_pro4_peri_reset_data,
+	},
 	/* Analog signal amplifiers reset */
 	{
 		.compatible = "socionext,uniphier-ld11-adamv-reset",