Commit c140dd91 authored by Ajay Singh's avatar Ajay Singh Committed by Greg Kroah-Hartman

staging: wilc1000: move current_tx_rate enum to wilc_wlan_if.h file

Move 'current_tx_rate' enum to wilc_wlan_if.h, to have it along with the
other FW related to constants. Also added prefix to have a better
namespace.
Signed-off-by: default avatarAjay Singh <ajay.kathat@microchip.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent b997b84f
...@@ -127,22 +127,6 @@ struct host_if_pmkid_attr { ...@@ -127,22 +127,6 @@ struct host_if_pmkid_attr {
struct host_if_pmkid pmkidlist[WILC_MAX_NUM_PMKIDS]; struct host_if_pmkid pmkidlist[WILC_MAX_NUM_PMKIDS];
}; };
enum current_tx_rate {
AUTORATE = 0,
MBPS_1 = 1,
MBPS_2 = 2,
MBPS_5_5 = 5,
MBPS_11 = 11,
MBPS_6 = 6,
MBPS_9 = 9,
MBPS_12 = 12,
MBPS_18 = 18,
MBPS_24 = 24,
MBPS_36 = 36,
MBPS_48 = 48,
MBPS_54 = 54
};
struct cfg_param_attr { struct cfg_param_attr {
u32 flag; u32 flag;
u16 short_retry_limit; u16 short_retry_limit;
......
...@@ -342,7 +342,7 @@ static int linux_wlan_init_test_config(struct net_device *dev, ...@@ -342,7 +342,7 @@ static int linux_wlan_init_test_config(struct net_device *dev,
if (!wilc_wlan_cfg_set(vif, 0, WID_BSS_TYPE, c_val, 1, 0, 0)) if (!wilc_wlan_cfg_set(vif, 0, WID_BSS_TYPE, c_val, 1, 0, 0))
goto fail; goto fail;
c_val[0] = AUTORATE; c_val[0] = WILC_FW_TX_RATE_AUTO;
if (!wilc_wlan_cfg_set(vif, 0, WID_CURRENT_TX_RATE, c_val, 1, 0, 0)) if (!wilc_wlan_cfg_set(vif, 0, WID_CURRENT_TX_RATE, c_val, 1, 0, 0))
goto fail; goto fail;
......
...@@ -193,6 +193,22 @@ enum { ...@@ -193,6 +193,22 @@ enum {
WILC_FW_SMPS_MODE_MIMO = 3, /* power save disable */ WILC_FW_SMPS_MODE_MIMO = 3, /* power save disable */
}; };
enum {
WILC_FW_TX_RATE_AUTO = 0,
WILC_FW_TX_RATE_MBPS_1 = 1,
WILC_FW_TX_RATE_MBPS_2 = 2,
WILC_FW_TX_RATE_MBPS_5_5 = 5,
WILC_FW_TX_RATE_MBPS_11 = 11,
WILC_FW_TX_RATE_MBPS_6 = 6,
WILC_FW_TX_RATE_MBPS_9 = 9,
WILC_FW_TX_RATE_MBPS_12 = 12,
WILC_FW_TX_RATE_MBPS_18 = 18,
WILC_FW_TX_RATE_MBPS_24 = 24,
WILC_FW_TX_RATE_MBPS_36 = 36,
WILC_FW_TX_RATE_MBPS_48 = 48,
WILC_FW_TX_RATE_MBPS_54 = 54
};
enum wid_type { enum wid_type {
WID_CHAR = 0, WID_CHAR = 0,
WID_SHORT = 1, WID_SHORT = 1,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment