V4L/DVB (9037): Fix support for Hauppauge Nova-S SE

Different backends have different input busses (saa7146, flexcop).
To reflect that a config-option to the s5h1420-driver was added which makes
the output mode selectable.

Furthermore the s5h1420-driver is now doing the same i2c-method as it was done
before adding support for other i2c-users.

This patch needs to go into the current release of the kernel, as this driver
is currently broken.

(Thanks to Eberhard Kaltenhaeuser for helping out to debug this issue.)
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb/b2c2/flexcop-fe-tuner.c

@@ -491,6 +491,7 @@ static struct s5h1420_config skystar2_rev2_7_s5h1420_config = {
 	.demod_address = 0x53,
 	.invert = 1,
 	.repeated_start_workaround = 1,
+	.serial_mpeg = 1,
 };
 
 static struct itd1000_config skystar2_rev2_7_itd1000_config = {

drivers/media/dvb/frontends/s5h1420.c

@@ -94,8 +94,11 @@ static u8 s5h1420_readreg(struct s5h1420_state *state, u8 reg)
 		if (ret != 3)
 			return ret;
 	} else {
-		ret = i2c_transfer(state->i2c, &msg[1], 2);
-		if (ret != 2)
+		ret = i2c_transfer(state->i2c, &msg[1], 1);
+		if (ret != 1)
+			return ret;
+		ret = i2c_transfer(state->i2c, &msg[2], 1);
+		if (ret != 1)
 			return ret;
 	}
 
@@ -823,7 +826,7 @@ static int s5h1420_init (struct dvb_frontend* fe)
 	struct s5h1420_state* state = fe->demodulator_priv;
 
 	/* disable power down and do reset */
-	state->CON_1_val = 0x10;
+	state->CON_1_val = state->config->serial_mpeg << 4;
 	s5h1420_writereg(state, 0x02, state->CON_1_val);
 	msleep(10);
 	s5h1420_reset(state);

drivers/media/dvb/frontends/s5h1420.h

@@ -32,10 +32,12 @@ struct s5h1420_config
 	u8 demod_address;
 
 	/* does the inversion require inversion? */
-	u8 invert : 1;
+	u8 invert:1;
 
-	u8 repeated_start_workaround : 1;
-	u8 cdclk_polarity : 1; /* 1 == falling edge, 0 == raising edge */
+	u8 repeated_start_workaround:1;
+	u8 cdclk_polarity:1; /* 1 == falling edge, 0 == raising edge */
+
+	u8 serial_mpeg:1;
 };
 
 #if defined(CONFIG_DVB_S5H1420) || (defined(CONFIG_DVB_S5H1420_MODULE) && defined(MODULE))