power: Add support for DA9150 Charger

This patch adds support for DA9150 Charger & Fuel-Gauge IC Charger.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>

drivers/power/Kconfig

@@ -192,6 +192,18 @@ config BATTERY_DA9052
 	  Say Y here to enable support for batteries charger integrated into
 	  DA9052 PMIC.
 
+config CHARGER_DA9150
+	tristate "Dialog Semiconductor DA9150 Charger support"
+	depends on MFD_DA9150
+	depends on DA9150_GPADC
+	depends on IIO
+	help
+	  Say Y here to enable support for charger unit of the DA9150
+	  Integrated Charger & Fuel-Gauge IC.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called da9150-charger.
+
 config BATTERY_MAX17040
 	tristate "Maxim MAX17040 Fuel Gauge"
 	depends on I2C

drivers/power/Makefile

@@ -32,6 +32,7 @@ obj-$(CONFIG_BATTERY_SBS)	+= sbs-battery.o
 obj-$(CONFIG_BATTERY_BQ27x00)	+= bq27x00_battery.o
 obj-$(CONFIG_BATTERY_DA9030)	+= da9030_battery.o
 obj-$(CONFIG_BATTERY_DA9052)	+= da9052-battery.o
+obj-$(CONFIG_CHARGER_DA9150)	+= da9150-charger.o
 obj-$(CONFIG_BATTERY_MAX17040)	+= max17040_battery.o
 obj-$(CONFIG_BATTERY_MAX17042)	+= max17042_battery.o
 obj-$(CONFIG_BATTERY_Z2)	+= z2_battery.o