net: stmmac: Add VLAN HASH filtering support in GMAC4+

Adds the support for VLAN HASH Filtering in GMAC4/5 cores.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/dwmac4.h

@@ -16,6 +16,8 @@
 #define GMAC_CONFIG			0x00000000
 #define GMAC_PACKET_FILTER		0x00000008
 #define GMAC_HASH_TAB(x)		(0x10 + (x) * 4)
+#define GMAC_VLAN_TAG			0x00000050
+#define GMAC_VLAN_HASH_TABLE		0x00000058
 #define GMAC_RX_FLOW_CTRL		0x00000090
 #define GMAC_QX_TX_FLOW_CTRL(x)		(0x70 + x * 4)
 #define GMAC_TXQ_PRTY_MAP0		0x98
@@ -62,9 +64,18 @@
 #define GMAC_PACKET_FILTER_PM		BIT(4)
 #define GMAC_PACKET_FILTER_PCF		BIT(7)
 #define GMAC_PACKET_FILTER_HPF		BIT(10)
+#define GMAC_PACKET_FILTER_VTFE		BIT(16)
 
 #define GMAC_MAX_PERFECT_ADDRESSES	128
 
+/* MAC VLAN */
+#define GMAC_VLAN_EDVLP			BIT(26)
+#define GMAC_VLAN_VTHM			BIT(25)
+#define GMAC_VLAN_DOVLTC		BIT(20)
+#define GMAC_VLAN_ESVL			BIT(18)
+#define GMAC_VLAN_ETV			BIT(16)
+#define GMAC_VLAN_VID			GENMASK(15, 0)
+
 /* MAC RX Queue Enable */
 #define GMAC_RX_QUEUE_CLEAR(queue)	~(GENMASK(1, 0) << ((queue) * 2))
 #define GMAC_RX_AV_QUEUE_ENABLE(queue)	BIT((queue) * 2)

drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c

@@ -731,6 +731,34 @@ static void dwmac4_set_mac_loopback(void __iomem *ioaddr, bool enable)
 	writel(value, ioaddr + GMAC_CONFIG);
 }
 
+static void dwmac4_update_vlan_hash(struct mac_device_info *hw, u32 hash,
+				    bool is_double)
+{
+	void __iomem *ioaddr = hw->pcsr;
+
+	writel(hash, ioaddr + GMAC_VLAN_HASH_TABLE);
+
+	if (hash) {
+		u32 value = GMAC_VLAN_VTHM | GMAC_VLAN_ETV;
+		if (is_double) {
+			value |= GMAC_VLAN_EDVLP;
+			value |= GMAC_VLAN_ESVL;
+			value |= GMAC_VLAN_DOVLTC;
+		}
+
+		writel(value, ioaddr + GMAC_VLAN_TAG);
+	} else {
+		u32 value = readl(ioaddr + GMAC_VLAN_TAG);
+
+		value &= ~(GMAC_VLAN_VTHM | GMAC_VLAN_ETV);
+		value &= ~(GMAC_VLAN_EDVLP | GMAC_VLAN_ESVL);
+		value &= ~GMAC_VLAN_DOVLTC;
+		value &= ~GMAC_VLAN_VID;
+
+		writel(value, ioaddr + GMAC_VLAN_TAG);
+	}
+}
+
 const struct stmmac_ops dwmac4_ops = {
 	.core_init = dwmac4_core_init,
 	.set_mac = stmmac_set_mac,
@@ -761,6 +789,7 @@ const struct stmmac_ops dwmac4_ops = {
 	.debug = dwmac4_debug,
 	.set_filter = dwmac4_set_filter,
 	.set_mac_loopback = dwmac4_set_mac_loopback,
+	.update_vlan_hash = dwmac4_update_vlan_hash,
 };
 
 const struct stmmac_ops dwmac410_ops = {
@@ -793,6 +822,7 @@ const struct stmmac_ops dwmac410_ops = {
 	.debug = dwmac4_debug,
 	.set_filter = dwmac4_set_filter,
 	.set_mac_loopback = dwmac4_set_mac_loopback,
+	.update_vlan_hash = dwmac4_update_vlan_hash,
 };
 
 const struct stmmac_ops dwmac510_ops = {
@@ -830,6 +860,7 @@ const struct stmmac_ops dwmac510_ops = {
 	.rxp_config = dwmac5_rxp_config,
 	.flex_pps_config = dwmac5_flex_pps_config,
 	.set_mac_loopback = dwmac4_set_mac_loopback,
+	.update_vlan_hash = dwmac4_update_vlan_hash,
 };
 
 int dwmac4_setup(struct stmmac_priv *priv)

drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c

@@ -333,7 +333,7 @@ static void dwmac4_get_hw_feature(void __iomem *ioaddr,
 	dma_cap->mbps_10_100 = (hw_cap & GMAC_HW_FEAT_MIISEL);
 	dma_cap->mbps_1000 = (hw_cap & GMAC_HW_FEAT_GMIISEL) >> 1;
 	dma_cap->half_duplex = (hw_cap & GMAC_HW_FEAT_HDSEL) >> 2;
-	dma_cap->hash_filter = (hw_cap & GMAC_HW_FEAT_VLHASH) >> 4;
+	dma_cap->vlhash = (hw_cap & GMAC_HW_FEAT_VLHASH) >> 4;
 	dma_cap->multi_addr = (hw_cap & GMAC_HW_FEAT_ADDMAC) >> 18;
 	dma_cap->pcs = (hw_cap & GMAC_HW_FEAT_PCSSEL) >> 3;
 	dma_cap->sma_mdio = (hw_cap & GMAC_HW_FEAT_SMASEL) >> 5;