Merge nuts.davemloft.net:/disk1/BK/network-2.6

into nuts.davemloft.net:/disk1/BK/net-2.6

include/linux/sysctl.h

@@ -583,6 +583,8 @@ enum {
 	NET_SCTP_PRESERVE_ENABLE         = 11,
 	NET_SCTP_MAX_BURST               = 12,
 	NET_SCTP_ADDIP_ENABLE		 = 13,
+	NET_SCTP_RMEM			 = 14,
+	NET_SCTP_WMEM			 = 15,
 };
 
 /* /proc/sys/net/bridge */

include/net/sctp/constants.h

@@ -323,7 +323,7 @@ typedef enum {
 #define SCTP_DEFAULT_COOKIE_LIFE_USEC	0  /* microseconds */
 
 #define SCTP_DEFAULT_MINWINDOW	1500	/* default minimum rwnd size */
-#define SCTP_DEFAULT_MAXWINDOW	32768	/* default rwnd size */
+#define SCTP_DEFAULT_MAXWINDOW	65535	/* default rwnd size */
 #define SCTP_DEFAULT_MAXSEGMENT 1500	/* MTU size, this is the limit
                                          * to which we will raise the P-MTU.
 					 */

include/net/sctp/structs.h

@@ -193,6 +193,10 @@ extern struct sctp_globals {
 	
 	/* Flag to indicate if addip is enabled. */
 	int addip_enable;
+
+	/* socket receive and send buffer sizes. */ 
+	int rmem;
+	int wmem;
 } sctp_globals;
 
 #define sctp_rto_initial		(sctp_globals.rto_initial)
@@ -221,6 +225,8 @@ extern struct sctp_globals {
 #define sctp_local_addr_list		(sctp_globals.local_addr_list)
 #define sctp_local_addr_lock		(sctp_globals.local_addr_lock)
 #define sctp_addip_enable		(sctp_globals.addip_enable)
+#define sctp_rmem			(sctp_globals.rmem)
+#define sctp_wmem			(sctp_globals.wmem)
 
 /* SCTP Socket type: UDP or TCP style. */
 typedef enum {

net/sctp/Kconfig

@@ -37,19 +37,6 @@ config IP_SCTP
 
 	  If in doubt, say N.
 
-config SCTP_ADLER32
-	bool "SCTP: Use old checksum (Adler-32)"
-	depends on IP_SCTP
-	help
-	  RFC2960 currently specifies the Adler-32 checksum algorithm for SCTP.
-	  This has been deprecated and replaced by an algorithm now referred
-	  to as crc32c.
-
-	  If you say Y, this will use the Adler-32 algorithm, this might be 
-	  useful for interoperation with downlevel peers. 
-
-	  If unsure, say N.  
-
 config SCTP_DBG_MSG
 	bool "SCTP: Debug messages"
 	depends on IP_SCTP

net/sctp/Makefile

@@ -9,13 +9,7 @@ sctp-y := sm_statetable.o sm_statefuns.o sm_sideeffect.o \
 	  transport.o chunk.o sm_make_chunk.o ulpevent.o \
 	  inqueue.o outqueue.o ulpqueue.o command.o \
 	  tsnmap.o bind_addr.o socket.o primitive.o \
-	  output.o input.o debug.o ssnmap.o proc.o
-
-ifeq ($(CONFIG_SCTP_ADLER32), y)
-sctp-y += adler32.o
-else
-sctp-y += crc32c.o
-endif
+	  output.o input.o debug.o ssnmap.o proc.o crc32c.o
 
 sctp-$(CONFIG_SCTP_DBG_OBJCNT) += objcnt.o
 sctp-$(CONFIG_SYSCTL) += sysctl.o

net/sctp/adler32.c

-/* SCTP kernel reference Implementation
- * Copyright (c) 1999-2000 Cisco, Inc.
- * Copyright (c) 1999-2001 Motorola, Inc.
- * Copyright (c) 2003 International Business Machines, Corp.
- *
- * This file is part of the SCTP kernel reference Implementation
- *
- * This file has direct heritage from the SCTP user-level reference
- * implementation by R. Stewart, et al.  These functions implement the
- * Adler-32 algorithm as specified by RFC 2960.
- *
- * The SCTP reference implementation is free software;
- * you can redistribute it and/or modify it under the terms of
- * the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * The SCTP reference implementation is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- *                 ************************
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- * See the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with GNU CC; see the file COPYING.  If not, write to
- * the Free Software Foundation, 59 Temple Place - Suite 330,
- * Boston, MA 02111-1307, USA.
- *
- * Please send any bug reports or fixes you make to the
- * email address(es):
- *    lksctp developers <lksctp-developers@lists.sourceforge.net>
- *
- * Or submit a bug report through the following website:
- *    http://www.sf.net/projects/lksctp
- *
- * Written or modified by:
- *    Randall Stewart <rstewar1@email.mot.com>
- *    Ken Morneau     <kmorneau@cisco.com>
- *    Qiaobing Xie    <qxie1@email.mot.com>
- *    Sridhar Samudrala <sri@us.ibm.com>
- *
- * Any bugs reported given to us we will try to fix... any fixes shared will
- * be incorporated into the next SCTP release.
- */
-
-/* This is an entry point for external calls
- * Define this function in the header file. This is
- * direct from rfc1950, ...
- *
- * The following C code computes the Adler-32 checksum of a data buffer.
- * It is written for clarity, not for speed.  The sample code is in the
- * ANSI C programming language. Non C users may find it easier to read
- * with these hints:
- *
- *    &      Bitwise AND operator.
- *    >>     Bitwise right shift operator. When applied to an
- *           unsigned quantity, as here, right shift inserts zero bit(s)
- *           at the left.
- *    <<     Bitwise left shift operator. Left shift inserts zero
- *           bit(s) at the right.
- *    ++     "n++" increments the variable n.
- *    %      modulo operator: a % b is the remainder of a divided by b.
- *
- * Well, the above is a bit of a lie, I have optimized this a small
- * tad, but I have commented the original lines below
- */
-
-#include <linux/types.h>
-#include <net/sctp/sctp.h>
-
-#define BASE 65521 /* largest prime smaller than 65536 */
-
-
-/* Performance work as shown this pig to be the
- * worst CPU wise guy. I have done what I could think
- * of on my flight to Australia but I am sure some
- * clever assembly could speed this up, but of
- * course this would require the dreaded #ifdef's for
- * architecture. If you can speed this up more, pass
- * it back and we will incorporate it :-)
- */
-
-unsigned long update_adler32(unsigned long adler,
-			     unsigned char *buf, int len)
-{
-	__u32 s1 = adler & 0xffff;
-	__u32 s2 = (adler >> 16) & 0xffff;
-        int n;
-
-	for (n = 0; n < len; n++,buf++) {
-		/* s1 = (s1 + buf[n]) % BASE */
-		/* first we add */
-		s1 = (s1 + *buf);
-
-		/* Now if we need to, we do a mod by
-		 * subtracting. It seems a bit faster
-		 * since I really will only ever do
-		 * one subtract at the MOST, since buf[n]
-		 * is a max of 255.
-		 */
-		if (s1 >= BASE)
-			s1 -= BASE;
-
-		/* s2 = (s2 + s1) % BASE */
-		/* first we add */
-		s2 = (s2 + s1);
-
-		/* again, it is more efficient (it seems) to
-		 * subtract since the most s2 will ever be
-		 * is (BASE-1 + BASE-1) in the worse case.
-		 * This would then be (2 * BASE) - 2, which
-		 * will still only do one subtract. On Intel
-		 * this is much better to do this way and
-		 * avoid the divide. Have not -pg'd on
-		 * sparc.
-		 */
-		if (s2 >= BASE) {
-			/*      s2 %= BASE;*/
-			s2 -= BASE;
-		}
-	}
-
-	/* Return the adler32 of the bytes buf[0..len-1] */
-	return (s2 << 16) + s1;
-}
-
-__u32 sctp_start_cksum(__u8 *ptr, __u16 count)
-{
-	/*
-	 * Update a running Adler-32 checksum with the bytes
-	 * buf[0..len-1] and return the updated checksum. The Adler-32
-	 * checksum should be initialized to 1.
-	 */
-	__u32 adler = 1L;
-	__u32 zero = 0L;
-
-	/* Calculate the CRC up to the checksum field. */
-	adler = update_adler32(adler, ptr,
-			       sizeof(struct sctphdr) - sizeof(__u32));
-	/* Skip over the checksum field. */
-	adler = update_adler32(adler, (unsigned char *) &zero,
-			       sizeof(__u32));
-	ptr += sizeof(struct sctphdr);
-	count -= sizeof(struct sctphdr);
-
-	/* Calculate the rest of the Adler-32. */
-	adler = update_adler32(adler, ptr, count);
-
-        return adler;
-}
-
-__u32 sctp_update_cksum(__u8 *ptr, __u16 count, __u32 adler)
-{
-	adler = update_adler32(adler, ptr, count);
-
-	return adler;
-}
-
-__u32 sctp_update_copy_cksum(__u8 *to, __u8 *from, __u16 count, __u32 adler)
-{
-	/* Its not worth it to try harder.  Adler32 is obsolescent. */
-	adler = update_adler32(adler, from, count);
-	memcpy(to, from, count);
-
-	return adler;
-}
-
-__u32 sctp_end_cksum(__u32 adler)
-{
-	return adler;
-}

net/sctp/associola.c

@@ -192,7 +192,7 @@ struct sctp_association *sctp_association_init(struct sctp_association *asoc,
 	asoc->rwnd_over = 0;
 
 	/* Use my own max window until I learn something better.  */
-	asoc->peer.rwnd = SCTP_DEFAULT_MAXWINDOW;
+	asoc->peer.rwnd = sctp_rmem;
 
 	/* Set the sndbuf size for transmit.  */
 	asoc->sndbuf_used = 0;
@@ -498,7 +498,7 @@ struct sctp_transport *sctp_assoc_add_peer(struct sctp_association *asoc,
 	 * so initialize ssthresh to the default value and it will be set
 	 * later when we process the INIT.
 	 */
-	peer->ssthresh = SCTP_DEFAULT_MAXWINDOW;
+	peer->ssthresh = sctp_rmem;
 
 	peer->partial_bytes_acked = 0;
 	peer->flight_size = 0;

net/sctp/endpointola.c

@@ -148,12 +148,8 @@ struct sctp_endpoint *sctp_endpoint_init(struct sctp_endpoint *ep,
 		sp->autoclose * HZ;
 
 	/* Set up the default send/receive buffer space.  */
-
-	/* FIXME - Should the min and max window size be configurable
-	 * sysctl parameters as opposed to be constants?
-	 */
-	sk->sk_rcvbuf = SCTP_DEFAULT_MAXWINDOW;
-	sk->sk_sndbuf = SCTP_DEFAULT_MAXWINDOW * 2;
+	sk->sk_rcvbuf = sctp_rmem;
+	sk->sk_sndbuf = sctp_wmem;
 
 	/* Use SCTP specific send buffer space queues.  */
 	sk->sk_write_space = sctp_write_space;

net/sctp/protocol.c

 /* SCTP kernel reference Implementation
+ * (C) Copyright IBM Corp. 2001, 2004
  * Copyright (c) 1999-2000 Cisco, Inc.
  * Copyright (c) 1999-2001 Motorola, Inc.
- * Copyright (c) 2001-2003 International Business Machines, Corp.
  * Copyright (c) 2001 Intel Corp.
  * Copyright (c) 2001 Nokia, Inc.
  * Copyright (c) 2001 La Monte H.P. Yarroll
@@ -445,7 +445,10 @@ struct dst_entry *sctp_v4_get_dst(struct sctp_association *asoc,
 	memset(&fl, 0x0, sizeof(struct flowi));
 	fl.fl4_dst  = daddr->v4.sin_addr.s_addr;
 	fl.proto = IPPROTO_SCTP;
-
+	if (asoc) {
+		fl.fl4_tos = RT_CONN_FLAGS(asoc->base.sk);
+		fl.oif = asoc->base.sk->sk_bound_dev_if;
+	}
 	if (saddr)
 		fl.fl4_src = saddr->v4.sin_addr.s_addr;
 
@@ -1046,6 +1049,10 @@ __init int sctp_init(void)
 	sctp_max_instreams    		= SCTP_DEFAULT_INSTREAMS;
 	sctp_max_outstreams   		= SCTP_DEFAULT_OUTSTREAMS;
 
+	/* Initialize default send & receive buffer sizes. */
+	sctp_rmem 			= SCTP_DEFAULT_MAXWINDOW;
+	sctp_wmem 			= SCTP_DEFAULT_MAXWINDOW;
+
 	/* Size and allocate the association hash table.
 	 * The methodology is similar to that of the tcp hash tables.
 	 */

net/sctp/sysctl.c

@@ -170,6 +170,22 @@ static ctl_table sctp_table[] = {
 		.mode		= 0644,
 		.proc_handler	= &proc_dointvec
 	},
+	{
+		.ctl_name	= NET_SCTP_RMEM,
+		.procname	= "rmem",
+		.data		= &sctp_rmem,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec
+	},
+	{
+		.ctl_name	= NET_SCTP_WMEM,
+		.procname	= "wmem",
+		.data		= &sctp_wmem,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec
+	},
 	{ .ctl_name = 0 }
 };
 

net/sctp/ulpqueue.c

@@ -768,7 +768,7 @@ void sctp_ulpq_renege(struct sctp_ulpq *ulpq, struct sctp_chunk *chunk,
 		needed = ntohs(chunk->chunk_hdr->length);
 		needed -= sizeof(sctp_data_chunk_t);
 	} else 
-		needed = SCTP_DEFAULT_MAXWINDOW;
+		needed = sctp_rmem;
 
 	freed = 0;