i2c: replace i2c_new_probed_device with an ERR_PTR variant

In the general move to have i2c_new_*_device functions which return
ERR_PTR instead of NULL, this patch converts i2c_new_probed_device().

There are only few users, so this patch converts the I2C core and all
users in one go. The function gets renamed to i2c_new_scanned_device()
so out-of-tree users will get a build failure to understand they need to
adapt their error checking code.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Max Staudt <max@enpas.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Documentation/i2c/instantiating-devices.rst

@@ -123,7 +123,7 @@ present or not (for example for an optional feature which is not present
 on cheap variants of a board but you have no way to tell them apart), or
 it may have different addresses from one board to the next (manufacturer
 changing its design without notice). In this case, you can call
-i2c_new_probed_device() instead of i2c_new_device().
+i2c_new_scanned_device() instead of i2c_new_device().
 
 Example (from the nxp OHCI driver)::
 
@@ -139,8 +139,8 @@ Example (from the nxp OHCI driver)::
 	i2c_adap = i2c_get_adapter(2);
 	memset(&i2c_info, 0, sizeof(struct i2c_board_info));
 	strscpy(i2c_info.type, "isp1301_nxp", sizeof(i2c_info.type));
-	isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
-						   normal_i2c, NULL);
+	isp1301_i2c_client = i2c_new_scanned_device(i2c_adap, &i2c_info,
+						    normal_i2c, NULL);
 	i2c_put_adapter(i2c_adap);
 	(...)
   }
@@ -153,14 +153,14 @@ simply gives up.
 The driver which instantiated the I2C device is responsible for destroying
 it on cleanup. This is done by calling i2c_unregister_device() on the
 pointer that was earlier returned by i2c_new_device() or
-i2c_new_probed_device().
+i2c_new_scanned_device().
 
 
 Method 3: Probe an I2C bus for certain devices
 ----------------------------------------------
 
 Sometimes you do not have enough information about an I2C device, not even
-to call i2c_new_probed_device(). The typical case is hardware monitoring
+to call i2c_new_scanned_device(). The typical case is hardware monitoring
 chips on PC mainboards. There are several dozen models, which can live
 at 25 different addresses. Given the huge number of mainboards out there,
 it is next to impossible to build an exhaustive list of the hardware

Documentation/i2c/writing-clients.rst

@@ -185,14 +185,14 @@ Sometimes you know that a device is connected to a given I2C bus, but you
 don't know the exact address it uses.  This happens on TV adapters for
 example, where the same driver supports dozens of slightly different
 models, and I2C device addresses change from one model to the next.  In
-that case, you can use the i2c_new_probed_device() variant, which is
+that case, you can use the i2c_new_scanned_device() variant, which is
 similar to i2c_new_device(), except that it takes an additional list of
 possible I2C addresses to probe.  A device is created for the first
 responsive address in the list.  If you expect more than one device to be
-present in the address range, simply call i2c_new_probed_device() that
+present in the address range, simply call i2c_new_scanned_device() that
 many times.
 
-The call to i2c_new_device() or i2c_new_probed_device() typically happens
+The call to i2c_new_device() or i2c_new_scanned_device() typically happens
 in the I2C bus driver. You may want to save the returned i2c_client
 reference for later use.
 
@@ -237,7 +237,7 @@ Device Deletion
 ---------------
 
 Each I2C device which has been created using i2c_new_device() or
-i2c_new_probed_device() can be unregistered by calling
+i2c_new_scanned_device() can be unregistered by calling
 i2c_unregister_device().  If you don't call it explicitly, it will be
 called automatically before the underlying I2C bus itself is removed, as a
 device can't survive its parent in the device driver model.

drivers/i2c/i2c-core-base.c

@@ -2245,10 +2245,10 @@ int i2c_probe_func_quick_read(struct i2c_adapter *adap, unsigned short addr)
 EXPORT_SYMBOL_GPL(i2c_probe_func_quick_read);
 
 struct i2c_client *
-i2c_new_probed_device(struct i2c_adapter *adap,
-		      struct i2c_board_info *info,
-		      unsigned short const *addr_list,
-		      int (*probe)(struct i2c_adapter *adap, unsigned short addr))
+i2c_new_scanned_device(struct i2c_adapter *adap,
+		       struct i2c_board_info *info,
+		       unsigned short const *addr_list,
+		       int (*probe)(struct i2c_adapter *adap, unsigned short addr))
 {
 	int i;
 
@@ -2278,11 +2278,24 @@ i2c_new_probed_device(struct i2c_adapter *adap,
 
 	if (addr_list[i] == I2C_CLIENT_END) {
 		dev_dbg(&adap->dev, "Probing failed, no device found\n");
-		return NULL;
+		return ERR_PTR(-ENODEV);
 	}
 
 	info->addr = addr_list[i];
-	return i2c_new_device(adap, info);
+	return i2c_new_client_device(adap, info);
+}
+EXPORT_SYMBOL_GPL(i2c_new_scanned_device);
+
+struct i2c_client *
+i2c_new_probed_device(struct i2c_adapter *adap,
+		      struct i2c_board_info *info,
+		      unsigned short const *addr_list,
+		      int (*probe)(struct i2c_adapter *adap, unsigned short addr))
+{
+	struct i2c_client *client;
+
+	client = i2c_new_scanned_device(adap, info, addr_list, probe);
+	return IS_ERR(client) ? NULL : client;
 }
 EXPORT_SYMBOL_GPL(i2c_new_probed_device);
 

include/linux/i2c.h

@@ -452,10 +452,16 @@ i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *inf
  * a default probing method is used.
  */
 extern struct i2c_client *
+i2c_new_scanned_device(struct i2c_adapter *adap,
+		       struct i2c_board_info *info,
+		       unsigned short const *addr_list,
+		       int (*probe)(struct i2c_adapter *adap, unsigned short addr));
+
+extern struct i2c_client *
 i2c_new_probed_device(struct i2c_adapter *adap,
-		      struct i2c_board_info *info,
-		      unsigned short const *addr_list,
-		      int (*probe)(struct i2c_adapter *adap, unsigned short addr));
+		       struct i2c_board_info *info,
+		       unsigned short const *addr_list,
+		       int (*probe)(struct i2c_adapter *adap, unsigned short addr));
 
 /* Common custom probe functions */
 extern int i2c_probe_func_quick_read(struct i2c_adapter *adap, unsigned short addr);