Commit c1d2a196 authored by Michael Chan's avatar Michael Chan Committed by David S. Miller

[TG3]: Add PHY workaround for 5755M.

Some PHY trim values need to be fine-tuned on 5755M to be
IEEE-compliant.

Update version to 3.72.
Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent d6aa4ace
......@@ -68,8 +68,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
#define DRV_MODULE_VERSION "3.71"
#define DRV_MODULE_RELDATE "December 15, 2006"
#define DRV_MODULE_VERSION "3.72"
#define DRV_MODULE_RELDATE "January 8, 2007"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
......@@ -1015,7 +1015,12 @@ static int tg3_phy_reset(struct tg3 *tp)
else if (tp->tg3_flags2 & TG3_FLG2_PHY_JITTER_BUG) {
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x000a);
tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x010b);
if (tp->tg3_flags2 & TG3_FLG2_PHY_ADJUST_TRIM) {
tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x110b);
tg3_writephy(tp, MII_TG3_TEST1,
MII_TG3_TEST1_TRIM_EN | 0x4);
} else
tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x010b);
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400);
}
/* Set Extended packet length bit (bit 14) on all chips that */
......@@ -10803,9 +10808,11 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787)
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787) {
tp->tg3_flags2 |= TG3_FLG2_PHY_JITTER_BUG;
else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906)
if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5755M)
tp->tg3_flags2 |= TG3_FLG2_PHY_ADJUST_TRIM;
} else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906)
tp->tg3_flags2 |= TG3_FLG2_PHY_BER_BUG;
}
......
......@@ -1658,6 +1658,9 @@
#define MII_TG3_EPHY_TEST 0x1f /* 5906 PHY register */
#define MII_TG3_EPHY_SHADOW_EN 0x80
#define MII_TG3_TEST1 0x1e
#define MII_TG3_TEST1_TRIM_EN 0x0010
/* There are two ways to manage the TX descriptors on the tigon3.
* Either the descriptors are in host DMA'able memory, or they
* exist only in the cards on-chip SRAM. All 16 send bds are under
......@@ -2256,6 +2259,7 @@ struct tg3 {
#define TG3_FLG2_1SHOT_MSI 0x10000000
#define TG3_FLG2_PHY_JITTER_BUG 0x20000000
#define TG3_FLG2_NO_FWARE_REPORTED 0x40000000
#define TG3_FLG2_PHY_ADJUST_TRIM 0x80000000
u32 split_mode_max_reqs;
#define SPLIT_MODE_5704_MAX_REQ 3
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment