Merge branch 'net-dsa-mv88e6xxx-add-88e6361-support'

Alexis Lothoré says:

====================
net: dsa: mv88e6xxx: add 88E6361 support

This series brings initial support for Marvell 88E6361 switch.

MV88E6361 is a 8 ports switch with 5 integrated Gigabit PHYs and 3
2.5Gigabit SerDes interfaces. It is in fact a new variant in the
88E639X/88E6193X/88E6191X family with a subset of existing features:
- port 0: MII, RMII, RGMII, 1000BaseX, 2500BaseX
- port 3 to 7: triple speed internal phys
- port 9 and 10: 1000BaseX, 25000BaseX

Since said family is already well supported in mv88e6xxx driver, adding
initial support for this new switch mostly consists in finding the ID
exposed in its identification register, adding a proper description
in switch description tables in mv88e6xxx driver, and enforcing 88E6361
specificities in mv88e6393x_XXX methods.

- first 4 commits introduce an internal phy offset field for switches which
  have internal phys but not starting from port 0
- 5th commit is a fix on existing switches based on first commits
- 6th commit is a slight modification to prepare 886361 support
- last commit introduces 88E6361 support in 88E6393X family

This initial support has been tested with two samples of a custom board
with the following hardware configuration:
- a main CPU connected to MV88E6361 using port 0 as CPU port
- port 9 wired to a SFP cage
- port 10 wired to a G.Hn transceiver

The following setup was used:
PC <-ethernet-> (copper SFP) - Board 1 - (G.hn) <-phone line(RJ11)-> (G.hn) Board 2

The unit 1 has been configured to bridge SFP port and G.hn port together,
which allowed to successfully ping Board 2 from PC.
====================

Link: https://lore.kernel.org/r/20230529080246.82953-1-alexis.lothore@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Documentation/devicetree/bindings/net/dsa/marvell.txt

@@ -20,7 +20,7 @@ which is at a different MDIO base address in different switch families.
 			  6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321,
 			  6341, 6350, 6351, 6352
 - "marvell,mv88e6190"	: Switch has base address 0x00. Use with models:
-			  6190, 6190X, 6191, 6290, 6390, 6390X
+			  6163, 6190, 6190X, 6191, 6290, 6390, 6390X
 - "marvell,mv88e6250"	: Switch has base address 0x08 or 0x18. Use with model:
 			  6220, 6250
 

drivers/net/dsa/mv88e6xxx/chip.c

@@ -463,11 +463,11 @@ static int mv88e6xxx_port_setup_mac(struct mv88e6xxx_chip *chip, int port,
 	return err;
 }
 
-static int mv88e6xxx_phy_is_internal(struct dsa_switch *ds, int port)
+static int mv88e6xxx_phy_is_internal(struct mv88e6xxx_chip *chip, int port)
 {
-	struct mv88e6xxx_chip *chip = ds->priv;
-
-	return port < chip->info->num_internal_phys;
+	return port >= chip->info->internal_phys_offset &&
+		port < chip->info->num_internal_phys +
+			chip->info->internal_phys_offset;
 }
 
 static int mv88e6xxx_port_ppu_updates(struct mv88e6xxx_chip *chip, int port)
@@ -479,7 +479,7 @@ static int mv88e6xxx_port_ppu_updates(struct mv88e6xxx_chip *chip, int port)
 	 * report whether the port is internal.
 	 */
 	if (chip->info->family == MV88E6XXX_FAMILY_6250)
-		return port < chip->info->num_internal_phys;
+		return mv88e6xxx_phy_is_internal(chip, port);
 
 	err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, &reg);
 	if (err) {
@@ -584,7 +584,7 @@ static void mv88e6095_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
 
 	config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100;
 
-	if (mv88e6xxx_phy_is_internal(chip->ds, port)) {
+	if (mv88e6xxx_phy_is_internal(chip, port)) {
 		__set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces);
 	} else {
 		if (cmode < ARRAY_SIZE(mv88e6185_phy_interface_modes) &&
@@ -790,6 +790,8 @@ static void mv88e6393x_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
 	unsigned long *supported = config->supported_interfaces;
 	bool is_6191x =
 		chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6191X;
+	bool is_6361 =
+		chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6361;
 
 	mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported);
 
@@ -804,13 +806,17 @@ static void mv88e6393x_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
 		/* 6191X supports >1G modes only on port 10 */
 		if (!is_6191x || port == 10) {
 			__set_bit(PHY_INTERFACE_MODE_2500BASEX, supported);
-			__set_bit(PHY_INTERFACE_MODE_5GBASER, supported);
-			__set_bit(PHY_INTERFACE_MODE_10GBASER, supported);
+			config->mac_capabilities |= MAC_2500FD;
+
+			/* 6361 only supports up to 2500BaseX */
+			if (!is_6361) {
+				__set_bit(PHY_INTERFACE_MODE_5GBASER, supported);
+				__set_bit(PHY_INTERFACE_MODE_10GBASER, supported);
+				config->mac_capabilities |= MAC_5000FD |
+					MAC_10000FD;
+			}
 			/* FIXME: USXGMII is not supported yet */
 			/* __set_bit(PHY_INTERFACE_MODE_USXGMII, supported); */
-
-			config->mac_capabilities |= MAC_2500FD | MAC_5000FD |
-				MAC_10000FD;
 		}
 	}
 
@@ -832,7 +838,7 @@ static void mv88e6xxx_get_caps(struct dsa_switch *ds, int port,
 	chip->info->ops->phylink_get_caps(chip, port, config);
 	mv88e6xxx_reg_unlock(chip);
 
-	if (mv88e6xxx_phy_is_internal(ds, port)) {
+	if (mv88e6xxx_phy_is_internal(chip, port)) {
 		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
 			  config->supported_interfaces);
 		/* Internal ports with no phy-mode need GMII for PHYLIB */
@@ -872,7 +878,7 @@ static void mv88e6xxx_mac_config(struct dsa_switch *ds, int port,
 
 	mv88e6xxx_reg_lock(chip);
 
-	if (mode != MLO_AN_PHY || !mv88e6xxx_phy_is_internal(ds, port)) {
+	if (mode != MLO_AN_PHY || !mv88e6xxx_phy_is_internal(chip, port)) {
 		err = mv88e6xxx_port_config_interface(chip, port,
 						      state->interface);
 		if (err && err != -EOPNOTSUPP)
@@ -3334,7 +3340,7 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port)
 		caps = pl_config.mac_capabilities;
 
 		if (chip->info->ops->port_max_speed_mode)
-			mode = chip->info->ops->port_max_speed_mode(port);
+			mode = chip->info->ops->port_max_speed_mode(chip, port);
 		else
 			mode = PHY_INTERFACE_MODE_NA;
 
@@ -6047,7 +6053,8 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
 		.name = "Marvell 88E6191X",
 		.num_databases = 4096,
 		.num_ports = 11,	/* 10 + Z80 */
-		.num_internal_phys = 9,
+		.num_internal_phys = 8,
+		.internal_phys_offset = 1,
 		.max_vid = 8191,
 		.max_sid = 63,
 		.port_base_addr = 0x0,
@@ -6070,7 +6077,8 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
 		.name = "Marvell 88E6193X",
 		.num_databases = 4096,
 		.num_ports = 11,	/* 10 + Z80 */
-		.num_internal_phys = 9,
+		.num_internal_phys = 8,
+		.internal_phys_offset = 1,
 		.max_vid = 8191,
 		.max_sid = 63,
 		.port_base_addr = 0x0,
@@ -6332,6 +6340,32 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
 		.ptp_support = true,
 		.ops = &mv88e6352_ops,
 	},
+	[MV88E6361] = {
+		.prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6361,
+		.family = MV88E6XXX_FAMILY_6393,
+		.name = "Marvell 88E6361",
+		.num_databases = 4096,
+		.num_macs = 16384,
+		.num_ports = 11,
+		/* Ports 1, 2 and 8 are not routed */
+		.invalid_port_mask = BIT(1) | BIT(2) | BIT(8),
+		.num_internal_phys = 5,
+		.internal_phys_offset = 3,
+		.max_vid = 4095,
+		.max_sid = 63,
+		.port_base_addr = 0x0,
+		.phy_base_addr = 0x0,
+		.global1_addr = 0x1b,
+		.global2_addr = 0x1c,
+		.age_time_coeff = 3750,
+		.g1_irqs = 10,
+		.g2_irqs = 14,
+		.atu_move_port_mask = 0x1f,
+		.pvt = true,
+		.multi_chip = true,
+		.ptp_support = true,
+		.ops = &mv88e6393x_ops,
+	},
 	[MV88E6390] = {
 		.prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6390,
 		.family = MV88E6XXX_FAMILY_6390,
@@ -6389,7 +6423,8 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
 		.name = "Marvell 88E6393X",
 		.num_databases = 4096,
 		.num_ports = 11,	/* 10 + Z80 */
-		.num_internal_phys = 9,
+		.num_internal_phys = 8,
+		.internal_phys_offset = 1,
 		.max_vid = 8191,
 		.max_sid = 63,
 		.port_base_addr = 0x0,

drivers/net/dsa/mv88e6xxx/chip.h

@@ -82,6 +82,7 @@ enum mv88e6xxx_model {
 	MV88E6350,
 	MV88E6351,
 	MV88E6352,
+	MV88E6361,
 	MV88E6390,
 	MV88E6390X,
 	MV88E6393X,
@@ -100,7 +101,7 @@ enum mv88e6xxx_family {
 	MV88E6XXX_FAMILY_6351,	/* 6171 6175 6350 6351 */
 	MV88E6XXX_FAMILY_6352,	/* 6172 6176 6240 6352 */
 	MV88E6XXX_FAMILY_6390,  /* 6190 6190X 6191 6290 6390 6390X */
-	MV88E6XXX_FAMILY_6393,	/* 6191X 6193X 6393X */
+	MV88E6XXX_FAMILY_6393,	/* 6191X 6193X 6361 6393X */
 };
 
 /**
@@ -167,6 +168,11 @@ struct mv88e6xxx_info {
 
 	/* Supports PTP */
 	bool ptp_support;
+
+	/* Internal PHY start index. 0 means that internal PHYs range starts at
+	 * port 0, 1 means internal PHYs range starts at port 1, etc
+	 */
+	unsigned int internal_phys_offset;
 };
 
 struct mv88e6xxx_atu_entry {
@@ -513,7 +519,8 @@ struct mv88e6xxx_ops {
 				     int speed, int duplex);
 
 	/* What interface mode should be used for maximum speed? */
-	phy_interface_t (*port_max_speed_mode)(int port);
+	phy_interface_t (*port_max_speed_mode)(struct mv88e6xxx_chip *chip,
+					       int port);
 
 	int (*port_tag_remap)(struct mv88e6xxx_chip *chip, int port);
 

drivers/net/dsa/mv88e6xxx/global2.c

@@ -1196,9 +1196,12 @@ int mv88e6xxx_g2_irq_setup(struct mv88e6xxx_chip *chip)
 int mv88e6xxx_g2_irq_mdio_setup(struct mv88e6xxx_chip *chip,
 				struct mii_bus *bus)
 {
+	int phy_start = chip->info->internal_phys_offset;
+	int phy_end = chip->info->internal_phys_offset +
+		      chip->info->num_internal_phys;
 	int phy, irq;
 
-	for (phy = 0; phy < chip->info->num_internal_phys; phy++) {
+	for (phy = phy_start; phy < phy_end; phy++) {
 		irq = irq_find_mapping(chip->g2_irq.domain, phy);
 		if (irq < 0)
 			return irq;

drivers/net/dsa/mv88e6xxx/port.c

@@ -342,7 +342,8 @@ int mv88e6341_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
 					       duplex);
 }
 
-phy_interface_t mv88e6341_port_max_speed_mode(int port)
+phy_interface_t mv88e6341_port_max_speed_mode(struct mv88e6xxx_chip *chip,
+					      int port)
 {
 	if (port == 5)
 		return PHY_INTERFACE_MODE_2500BASEX;
@@ -381,7 +382,8 @@ int mv88e6390_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
 					       duplex);
 }
 
-phy_interface_t mv88e6390_port_max_speed_mode(int port)
+phy_interface_t mv88e6390_port_max_speed_mode(struct mv88e6xxx_chip *chip,
+					      int port)
 {
 	if (port == 9 || port == 10)
 		return PHY_INTERFACE_MODE_2500BASEX;
@@ -403,7 +405,8 @@ int mv88e6390x_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
 					       duplex);
 }
 
-phy_interface_t mv88e6390x_port_max_speed_mode(int port)
+phy_interface_t mv88e6390x_port_max_speed_mode(struct mv88e6xxx_chip *chip,
+					       int port)
 {
 	if (port == 9 || port == 10)
 		return PHY_INTERFACE_MODE_XAUI;
@@ -421,6 +424,10 @@ int mv88e6393x_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
 	u16 reg, ctrl;
 	int err;
 
+	if (chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6361 &&
+	    speed > 2500)
+		return -EOPNOTSUPP;
+
 	if (speed == 200 && port != 0)
 		return -EOPNOTSUPP;
 
@@ -500,12 +507,17 @@ int mv88e6393x_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
 	return 0;
 }
 
-phy_interface_t mv88e6393x_port_max_speed_mode(int port)
+phy_interface_t mv88e6393x_port_max_speed_mode(struct mv88e6xxx_chip *chip,
+					       int port)
 {
-	if (port == 0 || port == 9 || port == 10)
-		return PHY_INTERFACE_MODE_10GBASER;
 
-	return PHY_INTERFACE_MODE_NA;
+	if (port != 0 && port != 9 && port != 10)
+		return PHY_INTERFACE_MODE_NA;
+
+	if (chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6361)
+		return PHY_INTERFACE_MODE_2500BASEX;
+
+	return PHY_INTERFACE_MODE_10GBASER;
 }
 
 static int mv88e6xxx_port_set_cmode(struct mv88e6xxx_chip *chip, int port,

drivers/net/dsa/mv88e6xxx/port.h

@@ -133,6 +133,7 @@
 #define MV88E6XXX_PORT_SWITCH_ID_PROD_6220	0x2200
 #define MV88E6XXX_PORT_SWITCH_ID_PROD_6240	0x2400
 #define MV88E6XXX_PORT_SWITCH_ID_PROD_6250	0x2500
+#define MV88E6XXX_PORT_SWITCH_ID_PROD_6361	0x2610
 #define MV88E6XXX_PORT_SWITCH_ID_PROD_6290	0x2900
 #define MV88E6XXX_PORT_SWITCH_ID_PROD_6321	0x3100
 #define MV88E6XXX_PORT_SWITCH_ID_PROD_6141	0x3400
@@ -359,10 +360,14 @@ int mv88e6390x_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
 int mv88e6393x_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
 				     int speed, int duplex);
 
-phy_interface_t mv88e6341_port_max_speed_mode(int port);
-phy_interface_t mv88e6390_port_max_speed_mode(int port);
-phy_interface_t mv88e6390x_port_max_speed_mode(int port);
-phy_interface_t mv88e6393x_port_max_speed_mode(int port);
+phy_interface_t mv88e6341_port_max_speed_mode(struct mv88e6xxx_chip *chip,
+					      int port);
+phy_interface_t mv88e6390_port_max_speed_mode(struct mv88e6xxx_chip *chip,
+					      int port);
+phy_interface_t mv88e6390x_port_max_speed_mode(struct mv88e6xxx_chip *chip,
+					       int port);
+phy_interface_t mv88e6393x_port_max_speed_mode(struct mv88e6xxx_chip *chip,
+					       int port);
 
 int mv88e6xxx_port_set_state(struct mv88e6xxx_chip *chip, int port, u8 state);