Merge tag 'stm32-dt-for-v4.11-1' of...

Merge tag 'stm32-dt-for-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt

STM32 DT updates for v4.11, round 1.

Highlights:
----------

 - ADD RTC support on STM32F429 MCU
 - Enable RTC on STM32F469and STM32F429 boards
 - ADD ADC support on STM32F429 MCU
 - Enable ADC on STM32F429 Eval board
 - Add I2S external clock
 - Fix memory size for STM32F429 Disco

Note:
-----
First patch "clk: stm32f4: Update DT bindings documentation")
has already been merged in clock tree.

* tag 'stm32-dt-for-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32: enable RTC on stm32429i-eval
  ARM: dts: stm32: enable RTC on stm32f469-disco
  ARM: dts: stm32: enable RTC on stm32f429-disco
  ARM: dts: stm32: Add RTC support for STM32F429 MCU
  ARM: dts: stm32: set HSE_RTC clock frequency to 1 MHz on stm32f429
  ARM: dts: stm32: Include auxiliary stm32fx clock definition
  ARM: dts: stm32: Add external I2S clock on stm32f429 MCU
  ARM: dts: stm32: enable ADC on stm32f429i-eval board
  ARM: dts: stm32: Add ADC support to stm32f429
  ARM: dts: stm32: Add missing USART3 pin config to stm32f469-disco board
  ARM: dts: stm32: Fix memory size from 8MB to 16MB on stm32f469-disco board
  clk: stm32f4: Update DT bindings documentation
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/clock/st,stm32-rcc.txt

@@ -17,6 +17,9 @@ Required properties:
   property, containing a phandle to the clock device node, an index selecting
   between gated clocks and other clocks and an index specifying the clock to
   use.
+- clocks: External oscillator clock phandle
+  - high speed external clock signal (HSE)
+  - external I2S clock (I2S_CKIN)
 
 Example:
 
@@ -25,6 +28,7 @@ Example:
 		#clock-cells = <2>
 		compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
 		reg = <0x40023800 0x400>;
+		clocks = <&clk_hse>, <&clk_i2s_ckin>;
 	};
 
 Specifying gated clocks
@@ -66,6 +70,19 @@ The secondary index is bound with the following magic numbers:
 
 	0	SYSTICK
 	1	FCLK
+	2	CLK_LSI		(low-power clock source)
+	3	CLK_LSE		(generated from a 32.768 kHz low-speed external
+				 crystal or ceramic resonator)
+	4	CLK_HSE_RTC	(HSE division factor for RTC clock)
+	5	CLK_RTC		(real-time clock)
+	6	PLL_VCO_I2S	(vco frequency of I2S pll)
+	7	PLL_VCO_SAI	(vco frequency of SAI pll)
+	8	CLK_LCD		(LCD-TFT)
+	9	CLK_I2S		(I2S clocks)
+	10	CLK_SAI1	(audio clocks)
+	11	CLK_SAI2
+	12	CLK_I2SQ_PDIV	(post divisor of pll i2s q divisor)
+	13	CLK_SAIQ_PDIV	(post divisor of pll sai q divisor)
 
 Example:
 

arch/arm/boot/dts/stm32429i-eval.dts

@@ -70,6 +70,20 @@ soc {
 		dma-ranges = <0xc0000000 0x0 0x10000000>;
 	};
 
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_vref: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vref";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		green {
@@ -112,6 +126,17 @@ usbotg_hs_phy: usbphy {
 	};
 };
 
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc3_in8_pin>;
+	vref-supply = <&reg_vref>;
+	status = "okay";
+	adc3: adc@200 {
+		st,adc-channels = <8>;
+		status = "okay";
+	};
+};
+
 &clk_hse {
 	clock-frequency = <25000000>;
 };
@@ -132,6 +157,10 @@ phy1: ethernet-phy@1 {
 	};
 };
 
+&rtc {
+	status = "okay";
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";

arch/arm/boot/dts/stm32f429-disco.dts

@@ -94,6 +94,12 @@ &clk_hse {
 	clock-frequency = <8000000>;
 };
 
+&rtc {
+	assigned-clocks = <&rcc 1 CLK_RTC>;
+	assigned-clock-parents = <&rcc 1 CLK_LSI>;
+	status = "okay";
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";

arch/arm/boot/dts/stm32f429.dtsi

@@ -48,6 +48,7 @@
 #include "skeleton.dtsi"
 #include "armv7-m.dtsi"
 #include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
+#include <dt-bindings/clock/stm32fx-clock.h>
 
 / {
 	clocks {
@@ -68,6 +69,12 @@ clk-lsi {
 			compatible = "fixed-clock";
 			clock-frequency = <32000>;
 		};
+
+		clk_i2s_ckin: i2s-ckin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
 	};
 
 	soc {
@@ -118,6 +125,20 @@ timer7: timer@40001400 {
 			status = "disabled";
 		};
 
+		rtc: rtc@40002800 {
+			compatible = "st,stm32-rtc";
+			reg = <0x40002800 0x400>;
+			clocks = <&rcc 1 CLK_RTC>;
+			clock-names = "ck_rtc";
+			assigned-clocks = <&rcc 1 CLK_RTC>;
+			assigned-clock-parents = <&rcc 1 CLK_LSE>;
+			interrupt-parent = <&exti>;
+			interrupts = <17 1>;
+			interrupt-names = "alarm";
+			st,syscfg = <&pwrcfg>;
+			status = "disabled";
+		};
+
 		usart2: serial@40004400 {
 			compatible = "st,stm32-usart", "st,stm32-uart";
 			reg = <0x40004400 0x400>;
@@ -188,6 +209,49 @@ usart6: serial@40011400 {
 			status = "disabled";
 		};
 
+		adc: adc@40012000 {
+			compatible = "st,stm32f4-adc-core";
+			reg = <0x40012000 0x400>;
+			interrupts = <18>;
+			clocks = <&rcc 0 168>;
+			clock-names = "adc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			adc1: adc@0 {
+				compatible = "st,stm32f4-adc";
+				#io-channel-cells = <1>;
+				reg = <0x0>;
+				clocks = <&rcc 0 168>;
+				interrupt-parent = <&adc>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
+			adc2: adc@100 {
+				compatible = "st,stm32f4-adc";
+				#io-channel-cells = <1>;
+				reg = <0x100>;
+				clocks = <&rcc 0 169>;
+				interrupt-parent = <&adc>;
+				interrupts = <1>;
+				status = "disabled";
+			};
+
+			adc3: adc@200 {
+				compatible = "st,stm32f4-adc";
+				#io-channel-cells = <1>;
+				reg = <0x200>;
+				clocks = <&rcc 0 170>;
+				interrupt-parent = <&adc>;
+				interrupts = <2>;
+				status = "disabled";
+			};
+		};
+
 		syscfg: system-config@40013800 {
 			compatible = "syscon";
 			reg = <0x40013800 0x400>;
@@ -316,6 +380,19 @@ pins2 {
 				};
 			};
 
+			usart3_pins_a: usart3@0 {
+				pins1 {
+					pinmux = <STM32F429_PB10_FUNC_USART3_TX>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32F429_PB11_FUNC_USART3_RX>;
+					bias-disable;
+				};
+			};
+
 			usbotg_hs_pins_a: usbotg_hs@0 {
 				pins {
 					pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
@@ -355,6 +432,12 @@ pins {
 					slew-rate = <2>;
 				};
 			};
+
+			adc3_in8_pin: adc@200 {
+				pins {
+					pinmux = <STM32F429_PF10_FUNC_ANALOG>;
+				};
+			};
 		};
 
 		rcc: rcc@40023810 {
@@ -362,8 +445,10 @@ rcc: rcc@40023810 {
 			#clock-cells = <2>;
 			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
 			reg = <0x40023800 0x400>;
-			clocks = <&clk_hse>;
+			clocks = <&clk_hse>, <&clk_i2s_ckin>;
 			st,syscfg = <&pwrcfg>;
+			assigned-clocks = <&rcc 1 CLK_HSE_RTC>;
+			assigned-clock-rates = <1000000>;
 		};
 
 		dma1: dma-controller@40026000 {

arch/arm/boot/dts/stm32f469-disco.dts

@@ -58,7 +58,7 @@ chosen {
 	};
 
 	memory {
-		reg = <0x00000000 0x800000>;
+		reg = <0x00000000 0x1000000>;
 	};
 
 	aliases {
@@ -78,6 +78,12 @@ &clk_hse {
 	clock-frequency = <8000000>;
 };
 
+&rtc {
+	status = "okay";
+};
+
 &usart3 {
+	pinctrl-0 = <&usart3_pins_a>;
+	pinctrl-names = "default";
 	status = "okay";
 };

include/dt-bindings/clock/stm32fx-clock.h

+/*
+ * stm32fx-clock.h
+ *
+ * Copyright (C) 2016 STMicroelectronics
+ * Author: Gabriel Fernandez for STMicroelectronics.
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+/*
+ * List of clocks wich are not derived from system clock (SYSCLOCK)
+ *
+ * The index of these clocks is the secondary index of DT bindings
+ * (see Documentatoin/devicetree/bindings/clock/st,stm32-rcc.txt)
+ *
+ * e.g:
+	<assigned-clocks = <&rcc 1 CLK_LSE>;
+*/
+
+#ifndef _DT_BINDINGS_CLK_STMFX_H
+#define _DT_BINDINGS_CLK_STMFX_H
+
+#define SYSTICK			0
+#define FCLK			1
+#define CLK_LSI			2
+#define CLK_LSE			3
+#define CLK_HSE_RTC		4
+#define CLK_RTC			5
+#define PLL_VCO_I2S		6
+#define PLL_VCO_SAI		7
+#define CLK_LCD			8
+#define CLK_I2S			9
+#define CLK_SAI1		10
+#define CLK_SAI2		11
+#define CLK_I2SQ_PDIV		12
+#define CLK_SAIQ_PDIV		13
+
+#define END_PRIMARY_CLK		14
+
+#endif