Merge tag 'mfd-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core Framework:
   - Change MFD support status from Supported to Maintained

  New Drivers:
   - Add support for the Intel Platform Management Component Interface
     (PMCI)

  Removed Drivers:
   - HTC PASIC3 LED/DS1WM
   - Toshiba T7L66XB, TC6387XB and TC6393XB TMIO

  New Device Support:
   - Add support for N6000 Flash to Intel M10 BMC PMCI
   - Add support for Lenovo Yoga Tab 3 to Intel CHTWC PMIC

  New Functionality:
   - Provide Reset support to Syscon

  Fix-ups:
   - Explicitly provide missing include files
   - Pass platform type data/info via the SPI/I2C/DT registration
     strategy
   - Lots of DT documentation / adaptions
   - Replace scnprintf() with preferred sysfs_emit()
   - Remove unused / superfluous code
   - Fix some trivial whitesspace / spelling / grammatical issues
   - Replace pm_power_off with new and improved
     register_sys_off_handler() API

  Bug Fixes:
   - Reintroduce RK808-clkout registration - fixing Wi-Fi and Bluetooth
   - Repair the order of AXPxxx IRQ PEK RISE/FALL definitions
   - Refuse to build CS5535 on unsupported UML architectures
   - Fix memory leaks in error return paths
   - Prevent refcount leaks in error return paths"

* tag 'mfd-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (40 commits)
  dt-bindings: mfd: qcom,tcsr: Add compatible for IPQ5332
  dt-bindings: mfd: Add NXP BBNSM
  mfd: ntxec: Add version number for EC in Tolino Vision
  dt-bindings: mfd: syscon: Add mt8365-syscfg
  mfd: Remove toshiba tmio drivers
  mfd: arizona: Use pm_runtime_resume_and_get() to prevent refcnt leak
  mfd: syscon: Allow reset control for syscon devices
  dt-bindings: mfd/syscon: Add resets property
  dt-bindings: mfd: syscon: Add amd,pensando-elba-syscon compatible
  dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8226
  mfd: simple-mfd-i2c: Fix incoherent comment regarding DT registration
  mfd: axp20x: Switch to the sys-off handler API
  mfd: core: Spelling s/compement/complement/
  mfd: max8925: Remove the unused function irq_to_max8925()
  mfd: qcom-pm8xxx: Remove set but unused variable 'rev'
  dt-bindings: mfd: syscon: Document GXP register compatible
  mfd: twl4030-power: Drop empty platform remove function
  mfd: twl: Fix TWL6032 phy vbus detection
  mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read()
  MAINTAINERS: Move MFD from a Supported to Maintaied state
  ...

Documentation/ABI/testing/sysfs-driver-intel-m10-bmc

-What:		/sys/bus/spi/devices/.../bmc_version
+What:		/sys/bus/.../drivers/intel-m10-bmc/.../bmc_version
 Date:		June 2020
 KernelVersion:	5.10
 Contact:	Xu Yilun <yilun.xu@intel.com>
@@ -6,7 +6,7 @@ Description:	Read only. Returns the hardware build version of Intel
 		MAX10 BMC chip.
 		Format: "0x%x".
 
-What:		/sys/bus/spi/devices/.../bmcfw_version
+What:		/sys/bus/.../drivers/intel-m10-bmc/.../bmcfw_version
 Date:		June 2020
 KernelVersion:	5.10
 Contact:	Xu Yilun <yilun.xu@intel.com>
@@ -14,7 +14,7 @@ Description:	Read only. Returns the firmware version of Intel MAX10
 		BMC chip.
 		Format: "0x%x".
 
-What:		/sys/bus/spi/devices/.../mac_address
+What:		/sys/bus/.../drivers/intel-m10-bmc/.../mac_address
 Date:		January 2021
 KernelVersion:  5.12
 Contact:	Russ Weight <russell.h.weight@intel.com>
@@ -25,7 +25,7 @@ Description:	Read only. Returns the first MAC address in a block
 		space.
 		Format: "%02x:%02x:%02x:%02x:%02x:%02x".
 
-What:		/sys/bus/spi/devices/.../mac_count
+What:		/sys/bus/.../drivers/intel-m10-bmc/.../mac_count
 Date:		January 2021
 KernelVersion:  5.12
 Contact:	Russ Weight <russell.h.weight@intel.com>

Documentation/devicetree/bindings/mfd/google,cros-ec.yaml

@@ -33,6 +33,9 @@ properties:
       - description:
           For implementations of the EC connected through RPMSG.
         const: google,cros-ec-rpmsg
+      - description:
+          For implementations of the EC connected through UART.
+        const: google,cros-ec-uart
 
   controller-data: true
 
@@ -187,6 +190,15 @@ allOf:
       properties:
         mediatek,rpmsg-name: false
 
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - google,cros-ec-rpmsg
+                - google,cros-ec-uart
+    then:
       required:
         - reg
         - interrupts
@@ -299,4 +311,12 @@ examples:
         vdd-supply = <&pp3300_fp_mcu>;
       };
     };
+
+  # Example for UART
+  - |
+    serial {
+        cros-ec {
+            compatible = "google,cros-ec-uart";
+        };
+    };
 ...

Documentation/devicetree/bindings/mfd/nxp,bbnsm.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/nxp,bbnsm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Battery-Backed Non-Secure Module
+
+maintainers:
+  - Jacky Bai <ping.bai@nxp.com>
+
+description: |
+  NXP BBNSM serves as non-volatile logic and storage for the system.
+  it Intergrates RTC & ON/OFF control.
+  The RTC can retain its state and continues counting even when the
+  main chip is power down. A time alarm is generated once the most
+  significant 32 bits of the real-time counter match the value in the
+  Time Alarm register.
+  The ON/OFF logic inside the BBNSM allows for connecting directly to
+  a PMIC or other voltage regulator device. both smart PMIC mode and
+  Dumb PMIC mode supported.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - nxp,imx93-bbnsm
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  rtc:
+    type: object
+    $ref: /schemas/rtc/rtc.yaml#
+
+    properties:
+      compatible:
+        enum:
+          - nxp,imx93-bbnsm-rtc
+
+      interrupts:
+        maxItems: 1
+
+      start-year: true
+
+    required:
+      - compatible
+      - interrupts
+
+    additionalProperties: false
+
+  pwrkey:
+    type: object
+    $ref: /schemas/input/input.yaml#
+
+    properties:
+      compatible:
+        enum:
+          - nxp,imx93-bbnsm-pwrkey
+
+      interrupts:
+        maxItems: 1
+
+      linux,code: true
+
+    required:
+      - compatible
+      - interrupts
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - rtc
+  - pwrkey
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/linux-event-codes.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bbnsm: bbnsm@44440000 {
+        compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd";
+        reg = <0x44440000 0x10000>;
+
+        bbnsm_rtc: rtc {
+            compatible = "nxp,imx93-bbnsm-rtc";
+            interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        bbnsm_pwrkey: pwrkey {
+            compatible = "nxp,imx93-bbnsm-pwrkey";
+            interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+            linux,code = <KEY_POWER>;
+        };
+    };

Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml

@@ -44,6 +44,7 @@ properties:
           - qcom,pm8004
           - qcom,pm8005
           - qcom,pm8009
+          - qcom,pm8010
           - qcom,pm8019
           - qcom,pm8028
           - qcom,pm8110
@@ -55,6 +56,10 @@ properties:
           - qcom,pm8350
           - qcom,pm8350b
           - qcom,pm8350c
+          - qcom,pm8550
+          - qcom,pm8550b
+          - qcom,pm8550ve
+          - qcom,pm8550vs
           - qcom,pm8841
           - qcom,pm8909
           - qcom,pm8916
@@ -71,10 +76,12 @@ properties:
           - qcom,pmi8998
           - qcom,pmk8002
           - qcom,pmk8350
+          - qcom,pmk8550
           - qcom,pmm8155au
           - qcom,pmp8074
           - qcom,pmr735a
           - qcom,pmr735b
+          - qcom,pmr735d
           - qcom,pms405
           - qcom,pmx55
           - qcom,pmx65

Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml

@@ -28,9 +28,11 @@ properties:
           - qcom,sm8150-tcsr
           - qcom,tcsr-apq8064
           - qcom,tcsr-apq8084
+          - qcom,tcsr-ipq5332
           - qcom,tcsr-ipq6018
           - qcom,tcsr-ipq8064
           - qcom,tcsr-mdm9615
+          - qcom,tcsr-msm8226
           - qcom,tcsr-msm8660
           - qcom,tcsr-msm8916
           - qcom,tcsr-msm8953

Documentation/devicetree/bindings/mfd/syscon.yaml

@@ -38,6 +38,7 @@ properties:
               - allwinner,sun8i-h3-system-controller
               - allwinner,sun8i-v3s-system-controller
               - allwinner,sun50i-a64-system-controller
+              - amd,pensando-elba-syscon
               - brcm,cru-clkset
               - freecom,fsg-cs2-system-controller
               - fsl,imx93-aonmix-ns-syscfg
@@ -46,10 +47,12 @@ properties:
               - hisilicon,hi6220-sramctrl
               - hisilicon,pcie-sas-subctrl
               - hisilicon,peri-subctrl
+              - hpe,gxp-sysreg
               - intel,lgm-syscon
               - marvell,armada-3700-usb2-host-misc
               - mediatek,mt8135-pctl-a-syscfg
               - mediatek,mt8135-pctl-b-syscfg
+              - mediatek,mt8365-syscfg
               - microchip,lan966x-cpu-syscon
               - microchip,sparx5-cpu-syscon
               - mstar,msc313-pmsleep
@@ -81,6 +84,9 @@ properties:
       on the device.
     enum: [1, 2, 4, 8]
 
+  resets:
+    maxItems: 1
+
   hwlocks:
     maxItems: 1
     description:

MAINTAINERS

@@ -10458,7 +10458,7 @@ S:	Maintained
 F:	Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
 F:	Documentation/hwmon/intel-m10-bmc-hwmon.rst
 F:	drivers/hwmon/intel-m10-bmc-hwmon.c
-F:	drivers/mfd/intel-m10-bmc.c
+F:	drivers/mfd/intel-m10-bmc*
 F:	include/linux/mfd/intel-m10-bmc.h
 
 INTEL MENLOW THERMAL DRIVER
@@ -14181,7 +14181,7 @@ F:	drivers/media/i2c/mt9v111.c
 
 MULTIFUNCTION DEVICES (MFD)
 M:	Lee Jones <lee@kernel.org>
-S:	Supported
+S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git
 F:	Documentation/devicetree/bindings/mfd/
 F:	drivers/mfd/

drivers/extcon/extcon-intel-cht-wc.c

@@ -537,6 +537,7 @@ static int cht_wc_extcon_probe(struct platform_device *pdev)
 		cht_wc_extcon_set_5v_boost(ext, false);
 		break;
 	case INTEL_CHT_WC_LENOVO_YOGABOOK1:
+	case INTEL_CHT_WC_LENOVO_YT3_X90:
 		/* Do this first, as it may very well return -EPROBE_DEFER. */
 		ret = cht_wc_extcon_get_role_sw_and_regulator(ext);
 		if (ret)

drivers/fpga/Kconfig

@@ -246,7 +246,7 @@ config FPGA_MGR_VERSAL_FPGA
 
 config FPGA_M10_BMC_SEC_UPDATE
 	tristate "Intel MAX10 BMC Secure Update driver"
-	depends on MFD_INTEL_M10_BMC
+	depends on MFD_INTEL_M10_BMC_CORE
 	select FW_LOADER
 	select FW_UPLOAD
 	help

drivers/hwmon/Kconfig

@@ -2340,7 +2340,7 @@ config SENSORS_XGENE
 
 config SENSORS_INTEL_M10_BMC_HWMON
 	tristate "Intel MAX10 BMC Hardware Monitoring"
-	depends on MFD_INTEL_M10_BMC
+	depends on MFD_INTEL_M10_BMC_CORE
 	help
 	  This driver provides support for the hardware monitoring functionality
 	  on Intel MAX10 BMC chip.

drivers/i2c/busses/i2c-cht-wc.c

@@ -380,6 +380,49 @@ static struct i2c_board_info lenovo_yogabook1_board_info = {
 	.platform_data = &bq2589x_pdata,
 };
 
+/********** Lenovo Yogabook YT3-X90F charger settings **********/
+static const char * const lenovo_yt3_bq25892_1_suppliers[] = { "cht_wcove_pwrsrc" };
+
+/*
+ * bq25892 charger settings for the round li-ion cells in the hinge,
+ * this is the main / biggest battery.
+ */
+static const struct property_entry lenovo_yt3_bq25892_1_props[] = {
+	PROPERTY_ENTRY_STRING_ARRAY("supplied-from", lenovo_yt3_bq25892_1_suppliers),
+	PROPERTY_ENTRY_STRING("linux,secondary-charger-name", "bq25890-charger-0"),
+	PROPERTY_ENTRY_U32("linux,iinlim-percentage", 60),
+	PROPERTY_ENTRY_U32("linux,pump-express-vbus-max", 12000000),
+	PROPERTY_ENTRY_BOOL("linux,skip-reset"),
+	/*
+	 * The firmware sets everything to the defaults, leading to a low(ish)
+	 * charge-current and battery-voltage of 2048mA resp 4.2V. Use the
+	 * Android values instead of "linux,read-back-settings" to fix this.
+	 */
+	PROPERTY_ENTRY_U32("ti,charge-current", 3072000),
+	PROPERTY_ENTRY_U32("ti,battery-regulation-voltage", 4352000),
+	PROPERTY_ENTRY_U32("ti,termination-current", 128000),
+	PROPERTY_ENTRY_U32("ti,precharge-current", 128000),
+	PROPERTY_ENTRY_U32("ti,minimum-sys-voltage", 3700000),
+	PROPERTY_ENTRY_BOOL("ti,use-ilim-pin"),
+	/* Set 5V boost current-limit to 1.2A (MAX/POR values are 2.45A/1.4A) */
+	PROPERTY_ENTRY_U32("ti,boost-voltage", 4998000),
+	PROPERTY_ENTRY_U32("ti,boost-max-current", 1200000),
+	{ }
+};
+
+static const struct software_node lenovo_yt3_bq25892_1_node = {
+	.properties = lenovo_yt3_bq25892_1_props,
+};
+
+/* bq25892 charger for the round li-ion cells in the hinge */
+static struct i2c_board_info lenovo_yoga_tab3_board_info = {
+	.type = "bq25892",
+	.addr = 0x6b,
+	.dev_name = "bq25892_1",
+	.swnode = &lenovo_yt3_bq25892_1_node,
+	.platform_data = &bq2589x_pdata,
+};
+
 static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
 {
 	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
@@ -459,6 +502,9 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
 	case INTEL_CHT_WC_LENOVO_YOGABOOK1:
 		board_info = &lenovo_yogabook1_board_info;
 		break;
+	case INTEL_CHT_WC_LENOVO_YT3_X90:
+		board_info = &lenovo_yoga_tab3_board_info;
+		break;
 	default:
 		dev_warn(&pdev->dev, "Unknown model, not instantiating charger device\n");
 		break;

drivers/mfd/Kconfig

@@ -15,6 +15,7 @@ config MFD_CS5535
 	tristate "AMD CS5535 and CS5536 southbridge core functions"
 	select MFD_CORE
 	depends on PCI && (X86_32 || (X86 && COMPILE_TEST))
+	depends on !UML
 	help
 	  This is the core driver for CS5535/CS5536 MFD functions.  This is
 	  necessary for using the board's GPIO and MFGPT functionality.
@@ -2166,14 +2167,32 @@ config SGI_MFD_IOC3
 	  If you have an SGI Origin, Octane, or a PCI IOC3 card,
 	  then say Y. Otherwise say N.
 
-config MFD_INTEL_M10_BMC
-	tristate "Intel MAX 10 Board Management Controller"
-	depends on SPI_MASTER
-	select REGMAP_SPI_AVMM
-	select MFD_CORE
+config MFD_INTEL_M10_BMC_CORE
+        tristate
+        select MFD_CORE
+        select REGMAP
+        default n
+
+config MFD_INTEL_M10_BMC_SPI
+        tristate "Intel MAX 10 Board Management Controller with SPI"
+        depends on SPI_MASTER
+        select MFD_INTEL_M10_BMC_CORE
+        select REGMAP_SPI_AVMM
+        help
+          Support for the Intel MAX 10 board management controller using the
+          SPI interface.
+
+          This driver provides common support for accessing the device,
+          additional drivers must be enabled in order to use the functionality
+          of the device.
+
+config MFD_INTEL_M10_BMC_PMCI
+	tristate "Intel MAX 10 Board Management Controller with PMCI"
+	depends on FPGA_DFL
+	select MFD_INTEL_M10_BMC_CORE
+	select REGMAP
 	help
-	  Support for the Intel MAX 10 board management controller using the
-	  SPI interface.
+	  Support for the Intel MAX 10 board management controller via PMCI.
 
 	  This driver provides common support for accessing the device,
 	  additional drivers must be enabled in order to use the functionality

drivers/mfd/Makefile

@@ -262,7 +262,10 @@ obj-$(CONFIG_MFD_QCOM_PM8008)	+= qcom-pm8008.o
 obj-$(CONFIG_SGI_MFD_IOC3)	+= ioc3.o
 obj-$(CONFIG_MFD_SIMPLE_MFD_I2C)	+= simple-mfd-i2c.o
 obj-$(CONFIG_MFD_SMPRO)		+= smpro-core.o
-obj-$(CONFIG_MFD_INTEL_M10_BMC)   += intel-m10-bmc.o
+
+obj-$(CONFIG_MFD_INTEL_M10_BMC_CORE)   += intel-m10-bmc-core.o
+obj-$(CONFIG_MFD_INTEL_M10_BMC_SPI)    += intel-m10-bmc-spi.o
+obj-$(CONFIG_MFD_INTEL_M10_BMC_PMCI)   += intel-m10-bmc-pmci.o
 
 obj-$(CONFIG_MFD_ATC260X)	+= atc260x-core.o
 obj-$(CONFIG_MFD_ATC260X_I2C)	+= atc260x-i2c.o

drivers/mfd/arizona-core.c

@@ -45,7 +45,7 @@ int arizona_clk32k_enable(struct arizona *arizona)
 	if (arizona->clk32k_ref == 1) {
 		switch (arizona->pdata.clk32k_src) {
 		case ARIZONA_32KZ_MCLK1:
-			ret = pm_runtime_get_sync(arizona->dev);
+			ret = pm_runtime_resume_and_get(arizona->dev);
 			if (ret != 0)
 				goto err_ref;
 			ret = clk_prepare_enable(arizona->mclk[ARIZONA_MCLK1]);

drivers/mfd/axp20x.c

@@ -23,7 +23,7 @@
 #include <linux/mfd/core.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
-#include <linux/pm_runtime.h>
+#include <linux/reboot.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 
@@ -825,17 +825,16 @@ static const struct mfd_cell axp813_cells[] = {
 	},
 };
 
-static struct axp20x_dev *axp20x_pm_power_off;
-static void axp20x_power_off(void)
+static int axp20x_power_off(struct sys_off_data *data)
 {
-	if (axp20x_pm_power_off->variant == AXP288_ID)
-		return;
+	struct axp20x_dev *axp20x = data->cb_data;
 
-	regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL,
-		     AXP20X_OFF);
+	regmap_write(axp20x->regmap, AXP20X_OFF_CTRL, AXP20X_OFF);
 
 	/* Give capacitors etc. time to drain to avoid kernel panic msg. */
 	mdelay(500);
+
+	return NOTIFY_DONE;
 }
 
 int axp20x_match_device(struct axp20x_dev *axp20x)
@@ -1002,10 +1001,11 @@ int axp20x_device_probe(struct axp20x_dev *axp20x)
 		return ret;
 	}
 
-	if (!pm_power_off) {
-		axp20x_pm_power_off = axp20x;
-		pm_power_off = axp20x_power_off;
-	}
+	if (axp20x->variant != AXP288_ID)
+		devm_register_sys_off_handler(axp20x->dev,
+					      SYS_OFF_MODE_POWER_OFF,
+					      SYS_OFF_PRIO_DEFAULT,
+					      axp20x_power_off, axp20x);
 
 	dev_info(axp20x->dev, "AXP20X driver loaded\n");
 
@@ -1015,11 +1015,6 @@ EXPORT_SYMBOL(axp20x_device_probe);
 
 void axp20x_device_remove(struct axp20x_dev *axp20x)
 {
-	if (axp20x == axp20x_pm_power_off) {
-		axp20x_pm_power_off = NULL;
-		pm_power_off = NULL;
-	}
-
 	mfd_remove_devices(axp20x->dev);
 	regmap_del_irq_chip(axp20x->irq, axp20x->regmap_irqc);
 }

drivers/mfd/intel-m10-bmc-core.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel MAX 10 Board Management Controller chip - common code
+ *
+ * Copyright (C) 2018-2020 Intel Corporation. All rights reserved.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/device.h>
+#include <linux/dev_printk.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel-m10-bmc.h>
+#include <linux/module.h>
+
+static ssize_t bmc_version_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct intel_m10bmc *ddata = dev_get_drvdata(dev);
+	unsigned int val;
+	int ret;
+
+	ret = m10bmc_sys_read(ddata, ddata->info->csr_map->build_version, &val);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "0x%x\n", val);
+}
+static DEVICE_ATTR_RO(bmc_version);
+
+static ssize_t bmcfw_version_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct intel_m10bmc *ddata = dev_get_drvdata(dev);
+	unsigned int val;
+	int ret;
+
+	ret = m10bmc_sys_read(ddata, ddata->info->csr_map->fw_version, &val);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "0x%x\n", val);
+}
+static DEVICE_ATTR_RO(bmcfw_version);
+
+static ssize_t mac_address_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct intel_m10bmc *ddata = dev_get_drvdata(dev);
+	unsigned int macaddr_low, macaddr_high;
+	int ret;
+
+	ret = m10bmc_sys_read(ddata, ddata->info->csr_map->mac_low, &macaddr_low);
+	if (ret)
+		return ret;
+
+	ret = m10bmc_sys_read(ddata, ddata->info->csr_map->mac_high, &macaddr_high);
+	if (ret)
+		return ret;
+
+	return sysfs_emit(buf, "%02x:%02x:%02x:%02x:%02x:%02x\n",
+			  (u8)FIELD_GET(M10BMC_N3000_MAC_BYTE1, macaddr_low),
+			  (u8)FIELD_GET(M10BMC_N3000_MAC_BYTE2, macaddr_low),
+			  (u8)FIELD_GET(M10BMC_N3000_MAC_BYTE3, macaddr_low),
+			  (u8)FIELD_GET(M10BMC_N3000_MAC_BYTE4, macaddr_low),
+			  (u8)FIELD_GET(M10BMC_N3000_MAC_BYTE5, macaddr_high),
+			  (u8)FIELD_GET(M10BMC_N3000_MAC_BYTE6, macaddr_high));
+}
+static DEVICE_ATTR_RO(mac_address);
+
+static ssize_t mac_count_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct intel_m10bmc *ddata = dev_get_drvdata(dev);
+	unsigned int macaddr_high;
+	int ret;
+
+	ret = m10bmc_sys_read(ddata, ddata->info->csr_map->mac_high, &macaddr_high);
+	if (ret)
+		return ret;
+
+	return sysfs_emit(buf, "%u\n", (u8)FIELD_GET(M10BMC_N3000_MAC_COUNT, macaddr_high));
+}
+static DEVICE_ATTR_RO(mac_count);
+
+static struct attribute *m10bmc_attrs[] = {
+	&dev_attr_bmc_version.attr,
+	&dev_attr_bmcfw_version.attr,
+	&dev_attr_mac_address.attr,
+	&dev_attr_mac_count.attr,
+	NULL,
+};
+
+static const struct attribute_group m10bmc_group = {
+	.attrs = m10bmc_attrs,
+};
+
+const struct attribute_group *m10bmc_dev_groups[] = {
+	&m10bmc_group,
+	NULL,
+};
+EXPORT_SYMBOL_GPL(m10bmc_dev_groups);
+
+int m10bmc_dev_init(struct intel_m10bmc *m10bmc, const struct intel_m10bmc_platform_info *info)
+{
+	int ret;
+
+	m10bmc->info = info;
+	dev_set_drvdata(m10bmc->dev, m10bmc);
+
+	ret = devm_mfd_add_devices(m10bmc->dev, PLATFORM_DEVID_AUTO,
+				   info->cells, info->n_cells,
+				   NULL, 0, NULL);
+	if (ret)
+		dev_err(m10bmc->dev, "Failed to register sub-devices: %d\n", ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(m10bmc_dev_init);
+
+MODULE_DESCRIPTION("Intel MAX 10 BMC core driver");
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL v2");

drivers/mfd/intel-m10-bmc.c → drivers/mfd/intel-m10-bmc-spi.c

@@ -5,39 +5,18 @@
  * Copyright (C) 2018-2020 Intel Corporation. All rights reserved.
  */
 #include <linux/bitfield.h>
+#include <linux/dev_printk.h>
 #include <linux/init.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/intel-m10-bmc.h>
 #include <linux/module.h>
-#include <linux/mutex.h>
 #include <linux/regmap.h>
 #include <linux/spi/spi.h>
 
-enum m10bmc_type {
-	M10_N3000,
-	M10_D5005,
-	M10_N5010,
-};
-
-static struct mfd_cell m10bmc_d5005_subdevs[] = {
-	{ .name = "d5005bmc-hwmon" },
-	{ .name = "d5005bmc-sec-update" }
-};
-
-static struct mfd_cell m10bmc_pacn3000_subdevs[] = {
-	{ .name = "n3000bmc-hwmon" },
-	{ .name = "n3000bmc-retimer" },
-	{ .name = "n3000bmc-sec-update" },
-};
-
-static struct mfd_cell m10bmc_n5010_subdevs[] = {
-	{ .name = "n5010bmc-hwmon" },
-};
-
 static const struct regmap_range m10bmc_regmap_range[] = {
-	regmap_reg_range(M10BMC_LEGACY_BUILD_VER, M10BMC_LEGACY_BUILD_VER),
-	regmap_reg_range(M10BMC_SYS_BASE, M10BMC_SYS_END),
-	regmap_reg_range(M10BMC_FLASH_BASE, M10BMC_FLASH_END),
+	regmap_reg_range(M10BMC_N3000_LEGACY_BUILD_VER, M10BMC_N3000_LEGACY_BUILD_VER),
+	regmap_reg_range(M10BMC_N3000_SYS_BASE, M10BMC_N3000_SYS_END),
+	regmap_reg_range(M10BMC_N3000_FLASH_BASE, M10BMC_N3000_FLASH_END),
 };
 
 static const struct regmap_access_table m10bmc_access_table = {
@@ -51,88 +30,8 @@ static struct regmap_config intel_m10bmc_regmap_config = {
 	.reg_stride = 4,
 	.wr_table = &m10bmc_access_table,
 	.rd_table = &m10bmc_access_table,
-	.max_register = M10BMC_MEM_END,
-};
-
-static ssize_t bmc_version_show(struct device *dev,
-				struct device_attribute *attr, char *buf)
-{
-	struct intel_m10bmc *ddata = dev_get_drvdata(dev);
-	unsigned int val;
-	int ret;
-
-	ret = m10bmc_sys_read(ddata, M10BMC_BUILD_VER, &val);
-	if (ret)
-		return ret;
-
-	return sprintf(buf, "0x%x\n", val);
-}
-static DEVICE_ATTR_RO(bmc_version);
-
-static ssize_t bmcfw_version_show(struct device *dev,
-				  struct device_attribute *attr, char *buf)
-{
-	struct intel_m10bmc *ddata = dev_get_drvdata(dev);
-	unsigned int val;
-	int ret;
-
-	ret = m10bmc_sys_read(ddata, NIOS2_FW_VERSION, &val);
-	if (ret)
-		return ret;
-
-	return sprintf(buf, "0x%x\n", val);
-}
-static DEVICE_ATTR_RO(bmcfw_version);
-
-static ssize_t mac_address_show(struct device *dev,
-				struct device_attribute *attr, char *buf)
-{
-	struct intel_m10bmc *max10 = dev_get_drvdata(dev);
-	unsigned int macaddr_low, macaddr_high;
-	int ret;
-
-	ret = m10bmc_sys_read(max10, M10BMC_MAC_LOW, &macaddr_low);
-	if (ret)
-		return ret;
-
-	ret = m10bmc_sys_read(max10, M10BMC_MAC_HIGH, &macaddr_high);
-	if (ret)
-		return ret;
-
-	return sysfs_emit(buf, "%02x:%02x:%02x:%02x:%02x:%02x\n",
-			  (u8)FIELD_GET(M10BMC_MAC_BYTE1, macaddr_low),
-			  (u8)FIELD_GET(M10BMC_MAC_BYTE2, macaddr_low),
-			  (u8)FIELD_GET(M10BMC_MAC_BYTE3, macaddr_low),
-			  (u8)FIELD_GET(M10BMC_MAC_BYTE4, macaddr_low),
-			  (u8)FIELD_GET(M10BMC_MAC_BYTE5, macaddr_high),
-			  (u8)FIELD_GET(M10BMC_MAC_BYTE6, macaddr_high));
-}
-static DEVICE_ATTR_RO(mac_address);
-
-static ssize_t mac_count_show(struct device *dev,
-			      struct device_attribute *attr, char *buf)
-{
-	struct intel_m10bmc *max10 = dev_get_drvdata(dev);
-	unsigned int macaddr_high;
-	int ret;
-
-	ret = m10bmc_sys_read(max10, M10BMC_MAC_HIGH, &macaddr_high);
-	if (ret)
-		return ret;
-
-	return sysfs_emit(buf, "%u\n",
-			  (u8)FIELD_GET(M10BMC_MAC_COUNT, macaddr_high));
-}
-static DEVICE_ATTR_RO(mac_count);
-
-static struct attribute *m10bmc_attrs[] = {
-	&dev_attr_bmc_version.attr,
-	&dev_attr_bmcfw_version.attr,
-	&dev_attr_mac_address.attr,
-	&dev_attr_mac_count.attr,
-	NULL,
+	.max_register = M10BMC_N3000_MEM_END,
 };
-ATTRIBUTE_GROUPS(m10bmc);
 
 static int check_m10bmc_version(struct intel_m10bmc *ddata)
 {
@@ -142,16 +41,16 @@ static int check_m10bmc_version(struct intel_m10bmc *ddata)
 	/*
 	 * This check is to filter out the very old legacy BMC versions. In the
 	 * old BMC chips, the BMC version info is stored in the old version
-	 * register (M10BMC_LEGACY_BUILD_VER), so its read out value would have
-	 * not been M10BMC_VER_LEGACY_INVALID (0xffffffff). But in new BMC
+	 * register (M10BMC_N3000_LEGACY_BUILD_VER), so its read out value would have
+	 * not been M10BMC_N3000_VER_LEGACY_INVALID (0xffffffff). But in new BMC
 	 * chips that the driver supports, the value of this register should be
-	 * M10BMC_VER_LEGACY_INVALID.
+	 * M10BMC_N3000_VER_LEGACY_INVALID.
 	 */
-	ret = m10bmc_raw_read(ddata, M10BMC_LEGACY_BUILD_VER, &v);
+	ret = m10bmc_raw_read(ddata, M10BMC_N3000_LEGACY_BUILD_VER, &v);
 	if (ret)
 		return -ENODEV;
 
-	if (v != M10BMC_VER_LEGACY_INVALID) {
+	if (v != M10BMC_N3000_VER_LEGACY_INVALID) {
 		dev_err(ddata->dev, "bad version M10BMC detected\n");
 		return -ENODEV;
 	}
@@ -162,19 +61,19 @@ static int check_m10bmc_version(struct intel_m10bmc *ddata)
 static int intel_m10_bmc_spi_probe(struct spi_device *spi)
 {
 	const struct spi_device_id *id = spi_get_device_id(spi);
+	const struct intel_m10bmc_platform_info *info;
 	struct device *dev = &spi->dev;
-	struct mfd_cell *cells;
 	struct intel_m10bmc *ddata;
-	int ret, n_cell;
+	int ret;
 
 	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
 	if (!ddata)
 		return -ENOMEM;
 
+	info = (struct intel_m10bmc_platform_info *)id->driver_data;
 	ddata->dev = dev;
 
-	ddata->regmap =
-		devm_regmap_init_spi_avmm(spi, &intel_m10bmc_regmap_config);
+	ddata->regmap = devm_regmap_init_spi_avmm(spi, &intel_m10bmc_regmap_config);
 	if (IS_ERR(ddata->regmap)) {
 		ret = PTR_ERR(ddata->regmap);
 		dev_err(dev, "Failed to allocate regmap: %d\n", ret);
@@ -189,35 +88,66 @@ static int intel_m10_bmc_spi_probe(struct spi_device *spi)
 		return ret;
 	}
 
-	switch (id->driver_data) {
-	case M10_N3000:
-		cells = m10bmc_pacn3000_subdevs;
-		n_cell = ARRAY_SIZE(m10bmc_pacn3000_subdevs);
-		break;
-	case M10_D5005:
-		cells = m10bmc_d5005_subdevs;
-		n_cell = ARRAY_SIZE(m10bmc_d5005_subdevs);
-		break;
-	case M10_N5010:
-		cells = m10bmc_n5010_subdevs;
-		n_cell = ARRAY_SIZE(m10bmc_n5010_subdevs);
-		break;
-	default:
-		return -ENODEV;
-	}
+	return m10bmc_dev_init(ddata, info);
+}
 
-	ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, cells, n_cell,
-				   NULL, 0, NULL);
-	if (ret)
-		dev_err(dev, "Failed to register sub-devices: %d\n", ret);
+static const struct m10bmc_csr_map m10bmc_n3000_csr_map = {
+	.base = M10BMC_N3000_SYS_BASE,
+	.build_version = M10BMC_N3000_BUILD_VER,
+	.fw_version = NIOS2_N3000_FW_VERSION,
+	.mac_low = M10BMC_N3000_MAC_LOW,
+	.mac_high = M10BMC_N3000_MAC_HIGH,
+	.doorbell = M10BMC_N3000_DOORBELL,
+	.auth_result = M10BMC_N3000_AUTH_RESULT,
+	.bmc_prog_addr = M10BMC_N3000_BMC_PROG_ADDR,
+	.bmc_reh_addr = M10BMC_N3000_BMC_REH_ADDR,
+	.bmc_magic = M10BMC_N3000_BMC_PROG_MAGIC,
+	.sr_prog_addr = M10BMC_N3000_SR_PROG_ADDR,
+	.sr_reh_addr = M10BMC_N3000_SR_REH_ADDR,
+	.sr_magic = M10BMC_N3000_SR_PROG_MAGIC,
+	.pr_prog_addr = M10BMC_N3000_PR_PROG_ADDR,
+	.pr_reh_addr = M10BMC_N3000_PR_REH_ADDR,
+	.pr_magic = M10BMC_N3000_PR_PROG_MAGIC,
+	.rsu_update_counter = M10BMC_N3000_STAGING_FLASH_COUNT,
+};
 
-	return ret;
-}
+static struct mfd_cell m10bmc_d5005_subdevs[] = {
+	{ .name = "d5005bmc-hwmon" },
+	{ .name = "d5005bmc-sec-update" },
+};
+
+static struct mfd_cell m10bmc_pacn3000_subdevs[] = {
+	{ .name = "n3000bmc-hwmon" },
+	{ .name = "n3000bmc-retimer" },
+	{ .name = "n3000bmc-sec-update" },
+};
+
+static struct mfd_cell m10bmc_n5010_subdevs[] = {
+	{ .name = "n5010bmc-hwmon" },
+};
+
+static const struct intel_m10bmc_platform_info m10bmc_spi_n3000 = {
+	.cells = m10bmc_pacn3000_subdevs,
+	.n_cells = ARRAY_SIZE(m10bmc_pacn3000_subdevs),
+	.csr_map = &m10bmc_n3000_csr_map,
+};
+
+static const struct intel_m10bmc_platform_info m10bmc_spi_d5005 = {
+	.cells = m10bmc_d5005_subdevs,
+	.n_cells = ARRAY_SIZE(m10bmc_d5005_subdevs),
+	.csr_map = &m10bmc_n3000_csr_map,
+};
+
+static const struct intel_m10bmc_platform_info m10bmc_spi_n5010 = {
+	.cells = m10bmc_n5010_subdevs,
+	.n_cells = ARRAY_SIZE(m10bmc_n5010_subdevs),
+	.csr_map = &m10bmc_n3000_csr_map,
+};
 
 static const struct spi_device_id m10bmc_spi_id[] = {
-	{ "m10-n3000", M10_N3000 },
-	{ "m10-d5005", M10_D5005 },
-	{ "m10-n5010", M10_N5010 },
+	{ "m10-n3000", (kernel_ulong_t)&m10bmc_spi_n3000 },
+	{ "m10-d5005", (kernel_ulong_t)&m10bmc_spi_d5005 },
+	{ "m10-n5010", (kernel_ulong_t)&m10bmc_spi_n5010 },
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, m10bmc_spi_id);
@@ -225,14 +155,14 @@ MODULE_DEVICE_TABLE(spi, m10bmc_spi_id);
 static struct spi_driver intel_m10bmc_spi_driver = {
 	.driver = {
 		.name = "intel-m10-bmc",
-		.dev_groups = m10bmc_groups,
+		.dev_groups = m10bmc_dev_groups,
 	},
 	.probe = intel_m10_bmc_spi_probe,
 	.id_table = m10bmc_spi_id,
 };
 module_spi_driver(intel_m10bmc_spi_driver);
 
-MODULE_DESCRIPTION("Intel MAX 10 BMC Device Driver");
+MODULE_DESCRIPTION("Intel MAX 10 BMC SPI bus interface");
 MODULE_AUTHOR("Intel Corporation");
 MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("spi:intel-m10-bmc");

drivers/mfd/intel_soc_pmic_chtwc.c

@@ -165,6 +165,14 @@ static const struct dmi_system_id cht_wc_model_dmi_ids[] = {
 			/* Non exact match to match all versions */
 			DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X9"),
 		},
+	}, {
+		/* Lenovo Yoga Tab 3 Pro YT3-X90F */
+		.driver_data = (void *)(long)INTEL_CHT_WC_LENOVO_YT3_X90,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "CHERRYVIEW D1 PLATFORM"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "Blade3-10A-001"),
+		},
 	},
 	{ }
 };

drivers/mfd/kempld-core.c

@@ -349,7 +349,7 @@ static ssize_t pld_version_show(struct device *dev,
 {
 	struct kempld_device_data *pld = dev_get_drvdata(dev);
 
-	return scnprintf(buf, PAGE_SIZE, "%s\n", pld->info.version);
+	return sysfs_emit(buf, "%s\n", pld->info.version);
 }
 
 static ssize_t pld_specification_show(struct device *dev,
@@ -357,8 +357,7 @@ static ssize_t pld_specification_show(struct device *dev,
 {
 	struct kempld_device_data *pld = dev_get_drvdata(dev);
 
-	return scnprintf(buf, PAGE_SIZE, "%d.%d\n", pld->info.spec_major,
-		       pld->info.spec_minor);
+	return sysfs_emit(buf, "%d.%d\n", pld->info.spec_major, pld->info.spec_minor);
 }
 
 static ssize_t pld_type_show(struct device *dev,
@@ -366,7 +365,7 @@ static ssize_t pld_type_show(struct device *dev,
 {
 	struct kempld_device_data *pld = dev_get_drvdata(dev);
 
-	return scnprintf(buf, PAGE_SIZE, "%s\n", kempld_get_type_string(pld));
+	return sysfs_emit(buf, "%s\n", kempld_get_type_string(pld));
 }
 
 static DEVICE_ATTR_RO(pld_version);

drivers/mfd/lm3533-core.c

@@ -286,7 +286,7 @@ static ssize_t show_output(struct device *dev,
 
 	val = (val & mask) >> shift;
 
-	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+	return sysfs_emit(buf, "%u\n", val);
 }
 
 static ssize_t store_output(struct device *dev,

drivers/mfd/max8925-core.c

@@ -469,12 +469,6 @@ static struct max8925_irq_data max8925_irqs[] = {
 	},
 };
 
-static inline struct max8925_irq_data *irq_to_max8925(struct max8925_chip *chip,
-						      int irq)
-{
-	return &max8925_irqs[irq - chip->irq_base];
-}
-
 static irqreturn_t max8925_irq(int irq, void *data)
 {
 	struct max8925_chip *chip = data;

drivers/mfd/ntxec.c

@@ -175,6 +175,7 @@ static int ntxec_probe(struct i2c_client *client)
 	/* Bail out if we encounter an unknown firmware version */
 	switch (version) {
 	case NTXEC_VERSION_KOBO_AURA:
+	case NTXEC_VERSION_TOLINO_VISION:
 		subdevs = ntxec_subdev;
 		n_subdevs = ARRAY_SIZE(ntxec_subdev);
 		break;

drivers/mfd/pcf50633-adc.c

@@ -136,6 +136,7 @@ int pcf50633_adc_async_read(struct pcf50633 *pcf, int mux, int avg,
 			     void *callback_param)
 {
 	struct pcf50633_adc_request *req;
+	int ret;
 
 	/* req is freed when the result is ready, in interrupt handler */
 	req = kmalloc(sizeof(*req), GFP_KERNEL);
@@ -147,7 +148,11 @@ int pcf50633_adc_async_read(struct pcf50633 *pcf, int mux, int avg,
 	req->callback = callback;
 	req->callback_param = callback_param;
 
-	return adc_enqueue_request(pcf, req);
+	ret = adc_enqueue_request(pcf, req);
+	if (ret)
+		kfree(req);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(pcf50633_adc_async_read);
 

drivers/mfd/qcom-pm8xxx.c

@@ -510,7 +510,6 @@ static int pm8xxx_probe(struct platform_device *pdev)
 	struct regmap *regmap;
 	int irq, rc;
 	unsigned int val;
-	u32 rev;
 	struct pm_irq_chip *chip;
 
 	data = of_device_get_match_data(&pdev->dev);
@@ -535,7 +534,6 @@ static int pm8xxx_probe(struct platform_device *pdev)
 		return rc;
 	}
 	pr_info("PMIC revision 1: %02X\n", val);
-	rev = val;
 
 	/* Read PMIC chip revision 2 */
 	rc = regmap_read(regmap, REG_HWREV_2, &val);
@@ -545,7 +543,6 @@ static int pm8xxx_probe(struct platform_device *pdev)
 		return rc;
 	}
 	pr_info("PMIC revision 2: %02X\n", val);
-	rev |= val << BITS_PER_BYTE;
 
 	chip = devm_kzalloc(&pdev->dev,
 			    struct_size(chip, config, data->num_irqs),

drivers/mfd/rk808.c

@@ -189,6 +189,7 @@ static const struct mfd_cell rk817s[] = {
 };
 
 static const struct mfd_cell rk818s[] = {
+	{ .name = "rk808-clkout", .id = PLATFORM_DEVID_NONE, },
 	{ .name = "rk808-regulator", .id = PLATFORM_DEVID_NONE, },
 	{
 		.name = "rk808-rtc",

drivers/mfd/simple-mfd-i2c.c

@@ -48,7 +48,7 @@ static int simple_mfd_i2c_probe(struct i2c_client *i2c)
 	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
 
-	/* If no MFD cells are spedified, use register the DT child nodes instead */
+	/* If no MFD cells are specified, register using the DT child nodes instead */
 	if (!simple_mfd_data || !simple_mfd_data->mfd_cell)
 		return devm_of_platform_populate(&i2c->dev);
 

drivers/mfd/syscon.c

@@ -20,6 +20,7 @@
 #include <linux/platform_data/syscon.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/reset.h>
 #include <linux/mfd/syscon.h>
 #include <linux/slab.h>
 
@@ -31,6 +32,7 @@ static LIST_HEAD(syscon_list);
 struct syscon {
 	struct device_node *np;
 	struct regmap *regmap;
+	struct reset_control *reset;
 	struct list_head list;
 };
 
@@ -40,7 +42,7 @@ static const struct regmap_config syscon_regmap_config = {
 	.reg_stride = 4,
 };
 
-static struct syscon *of_syscon_register(struct device_node *np, bool check_clk)
+static struct syscon *of_syscon_register(struct device_node *np, bool check_res)
 {
 	struct clk *clk;
 	struct syscon *syscon;
@@ -50,6 +52,7 @@ static struct syscon *of_syscon_register(struct device_node *np, bool check_clk)
 	int ret;
 	struct regmap_config syscon_config = syscon_regmap_config;
 	struct resource res;
+	struct reset_control *reset;
 
 	syscon = kzalloc(sizeof(*syscon), GFP_KERNEL);
 	if (!syscon)
@@ -114,7 +117,7 @@ static struct syscon *of_syscon_register(struct device_node *np, bool check_clk)
 		goto err_regmap;
 	}
 
-	if (check_clk) {
+	if (check_res) {
 		clk = of_clk_get(np, 0);
 		if (IS_ERR(clk)) {
 			ret = PTR_ERR(clk);
@@ -124,8 +127,18 @@ static struct syscon *of_syscon_register(struct device_node *np, bool check_clk)
 		} else {
 			ret = regmap_mmio_attach_clk(regmap, clk);
 			if (ret)
-				goto err_attach;
+				goto err_attach_clk;
 		}
+
+		reset = of_reset_control_get_optional_exclusive(np, NULL);
+		if (IS_ERR(reset)) {
+			ret = PTR_ERR(reset);
+			goto err_attach_clk;
+		}
+
+		ret = reset_control_deassert(reset);
+		if (ret)
+			goto err_reset;
 	}
 
 	syscon->regmap = regmap;
@@ -137,7 +150,9 @@ static struct syscon *of_syscon_register(struct device_node *np, bool check_clk)
 
 	return syscon;
 
-err_attach:
+err_reset:
+	reset_control_put(reset);
+err_attach_clk:
 	if (!IS_ERR(clk))
 		clk_put(clk);
 err_clk:
@@ -150,7 +165,7 @@ static struct syscon *of_syscon_register(struct device_node *np, bool check_clk)
 }
 
 static struct regmap *device_node_get_regmap(struct device_node *np,
-					     bool check_clk)
+					     bool check_res)
 {
 	struct syscon *entry, *syscon = NULL;
 
@@ -165,7 +180,7 @@ static struct regmap *device_node_get_regmap(struct device_node *np,
 	spin_unlock(&syscon_list_slock);
 
 	if (!syscon)
-		syscon = of_syscon_register(np, check_clk);
+		syscon = of_syscon_register(np, check_res);
 
 	if (IS_ERR(syscon))
 		return ERR_CAST(syscon);

drivers/mfd/twl-core.c

@@ -110,8 +110,8 @@
 #define TWL6030_BASEADD_PWM		0x00BA
 #define TWL6030_BASEADD_GASGAUGE	0x00C0
 #define TWL6030_BASEADD_PIH		0x00D0
-#define TWL6030_BASEADD_CHARGER		0x00E0
 #define TWL6032_BASEADD_CHARGER		0x00DA
+#define TWL6030_BASEADD_CHARGER		0x00E0
 #define TWL6030_BASEADD_LED		0x00F4
 
 /* subchip/slave 2 0x4A - DFT */
@@ -353,6 +353,9 @@ static struct twl_mapping twl6030_map[] = {
 	{ 2, TWL6030_BASEADD_ZERO },
 	{ 1, TWL6030_BASEADD_GPADC_CTRL },
 	{ 1, TWL6030_BASEADD_GASGAUGE },
+
+	/* TWL6032 specific charger registers */
+	{ 1, TWL6032_BASEADD_CHARGER },
 };
 
 static const struct regmap_config twl6030_regmap_config[3] = {
@@ -803,10 +806,6 @@ twl_probe(struct i2c_client *client)
 	if ((id->driver_data) & TWL6030_CLASS) {
 		twl_priv->twl_id = TWL6030_CLASS_ID;
 		twl_priv->twl_map = &twl6030_map[0];
-		/* The charger base address is different in twl6032 */
-		if ((id->driver_data) & TWL6032_SUBCLASS)
-			twl_priv->twl_map[TWL_MODULE_MAIN_CHARGE].base =
-							TWL6032_BASEADD_CHARGER;
 		twl_regmap_config = twl6030_regmap_config;
 	} else {
 		twl_priv->twl_id = TWL4030_CLASS_ID;

drivers/mfd/twl4030-power.c

@@ -953,18 +953,12 @@ static int twl4030_power_probe(struct platform_device *pdev)
 	return err;
 }
 
-static int twl4030_power_remove(struct platform_device *pdev)
-{
-	return 0;
-}
-
 static struct platform_driver twl4030_power_driver = {
 	.driver = {
 		.name	= "twl4030_power",
 		.of_match_table = of_match_ptr(twl4030_power_of_match),
 	},
 	.probe		= twl4030_power_probe,
-	.remove		= twl4030_power_remove,
 };
 
 module_platform_driver(twl4030_power_driver);

include/linux/mfd/axp20x.h

@@ -432,8 +432,9 @@ enum {
 	AXP152_IRQ_PEK_SHORT,
 	AXP152_IRQ_PEK_LONG,
 	AXP152_IRQ_TIMER,
-	AXP152_IRQ_PEK_RIS_EDGE,
+	/* out of bit order to make sure the press event is handled first */
 	AXP152_IRQ_PEK_FAL_EDGE,
+	AXP152_IRQ_PEK_RIS_EDGE,
 	AXP152_IRQ_GPIO3_INPUT,
 	AXP152_IRQ_GPIO2_INPUT,
 	AXP152_IRQ_GPIO1_INPUT,
@@ -472,8 +473,9 @@ enum {
 	AXP20X_IRQ_LOW_PWR_LVL1,
 	AXP20X_IRQ_LOW_PWR_LVL2,
 	AXP20X_IRQ_TIMER,
-	AXP20X_IRQ_PEK_RIS_EDGE,
+	/* out of bit order to make sure the press event is handled first */
 	AXP20X_IRQ_PEK_FAL_EDGE,
+	AXP20X_IRQ_PEK_RIS_EDGE,
 	AXP20X_IRQ_GPIO3_INPUT,
 	AXP20X_IRQ_GPIO2_INPUT,
 	AXP20X_IRQ_GPIO1_INPUT,
@@ -502,8 +504,9 @@ enum axp22x_irqs {
 	AXP22X_IRQ_LOW_PWR_LVL1,
 	AXP22X_IRQ_LOW_PWR_LVL2,
 	AXP22X_IRQ_TIMER,
-	AXP22X_IRQ_PEK_RIS_EDGE,
+	/* out of bit order to make sure the press event is handled first */
 	AXP22X_IRQ_PEK_FAL_EDGE,
+	AXP22X_IRQ_PEK_RIS_EDGE,
 	AXP22X_IRQ_GPIO1_INPUT,
 	AXP22X_IRQ_GPIO0_INPUT,
 };
@@ -571,8 +574,9 @@ enum axp803_irqs {
 	AXP803_IRQ_LOW_PWR_LVL1,
 	AXP803_IRQ_LOW_PWR_LVL2,
 	AXP803_IRQ_TIMER,
-	AXP803_IRQ_PEK_RIS_EDGE,
+	/* out of bit order to make sure the press event is handled first */
 	AXP803_IRQ_PEK_FAL_EDGE,
+	AXP803_IRQ_PEK_RIS_EDGE,
 	AXP803_IRQ_PEK_SHORT,
 	AXP803_IRQ_PEK_LONG,
 	AXP803_IRQ_PEK_OVER_OFF,
@@ -623,8 +627,9 @@ enum axp809_irqs {
 	AXP809_IRQ_LOW_PWR_LVL1,
 	AXP809_IRQ_LOW_PWR_LVL2,
 	AXP809_IRQ_TIMER,
-	AXP809_IRQ_PEK_RIS_EDGE,
+	/* out of bit order to make sure the press event is handled first */
 	AXP809_IRQ_PEK_FAL_EDGE,
+	AXP809_IRQ_PEK_RIS_EDGE,
 	AXP809_IRQ_PEK_SHORT,
 	AXP809_IRQ_PEK_LONG,
 	AXP809_IRQ_PEK_OVER_OFF,

include/linux/mfd/core.h

@@ -88,7 +88,7 @@ struct mfd_cell {
 	const char		*of_compatible;
 
 	/*
-	 * Address as defined in Device Tree.  Used to compement 'of_compatible'
+	 * Address as defined in Device Tree.  Used to complement 'of_compatible'
 	 * (above) when matching OF nodes with devices that have identical
 	 * compatible strings
 	 */

include/linux/mfd/intel-m10-bmc.h

@@ -7,40 +7,43 @@
 #ifndef __MFD_INTEL_M10_BMC_H
 #define __MFD_INTEL_M10_BMC_H
 
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/dev_printk.h>
 #include <linux/regmap.h>
 
-#define M10BMC_LEGACY_BUILD_VER		0x300468
-#define M10BMC_SYS_BASE			0x300800
-#define M10BMC_SYS_END			0x300fff
-#define M10BMC_FLASH_BASE		0x10000000
-#define M10BMC_FLASH_END		0x1fffffff
-#define M10BMC_MEM_END			M10BMC_FLASH_END
+#define M10BMC_N3000_LEGACY_BUILD_VER	0x300468
+#define M10BMC_N3000_SYS_BASE		0x300800
+#define M10BMC_N3000_SYS_END		0x300fff
+#define M10BMC_N3000_FLASH_BASE		0x10000000
+#define M10BMC_N3000_FLASH_END		0x1fffffff
+#define M10BMC_N3000_MEM_END		M10BMC_N3000_FLASH_END
 
 #define M10BMC_STAGING_BASE		0x18000000
 #define M10BMC_STAGING_SIZE		0x3800000
 
 /* Register offset of system registers */
-#define NIOS2_FW_VERSION		0x0
-#define M10BMC_MAC_LOW			0x10
-#define M10BMC_MAC_BYTE4		GENMASK(7, 0)
-#define M10BMC_MAC_BYTE3		GENMASK(15, 8)
-#define M10BMC_MAC_BYTE2		GENMASK(23, 16)
-#define M10BMC_MAC_BYTE1		GENMASK(31, 24)
-#define M10BMC_MAC_HIGH			0x14
-#define M10BMC_MAC_BYTE6		GENMASK(7, 0)
-#define M10BMC_MAC_BYTE5		GENMASK(15, 8)
-#define M10BMC_MAC_COUNT		GENMASK(23, 16)
-#define M10BMC_TEST_REG			0x3c
-#define M10BMC_BUILD_VER		0x68
-#define M10BMC_VER_MAJOR_MSK		GENMASK(23, 16)
-#define M10BMC_VER_PCB_INFO_MSK		GENMASK(31, 24)
-#define M10BMC_VER_LEGACY_INVALID	0xffffffff
+#define NIOS2_N3000_FW_VERSION		0x0
+#define M10BMC_N3000_MAC_LOW		0x10
+#define M10BMC_N3000_MAC_BYTE4		GENMASK(7, 0)
+#define M10BMC_N3000_MAC_BYTE3		GENMASK(15, 8)
+#define M10BMC_N3000_MAC_BYTE2		GENMASK(23, 16)
+#define M10BMC_N3000_MAC_BYTE1		GENMASK(31, 24)
+#define M10BMC_N3000_MAC_HIGH		0x14
+#define M10BMC_N3000_MAC_BYTE6		GENMASK(7, 0)
+#define M10BMC_N3000_MAC_BYTE5		GENMASK(15, 8)
+#define M10BMC_N3000_MAC_COUNT		GENMASK(23, 16)
+#define M10BMC_N3000_TEST_REG		0x3c
+#define M10BMC_N3000_BUILD_VER		0x68
+#define M10BMC_N3000_VER_MAJOR_MSK	GENMASK(23, 16)
+#define M10BMC_N3000_VER_PCB_INFO_MSK	GENMASK(31, 24)
+#define M10BMC_N3000_VER_LEGACY_INVALID	0xffffffff
 
 /* Secure update doorbell register, in system register region */
-#define M10BMC_DOORBELL			0x400
+#define M10BMC_N3000_DOORBELL		0x400
 
 /* Authorization Result register, in system register region */
-#define M10BMC_AUTH_RESULT		0x404
+#define M10BMC_N3000_AUTH_RESULT		0x404
 
 /* Doorbell register fields */
 #define DRBL_RSU_REQUEST		BIT(0)
@@ -88,7 +91,6 @@
 #define HOST_STATUS_ABORT_RSU		0x2
 
 #define rsu_prog(doorbell)	FIELD_GET(DRBL_RSU_PROGRESS, doorbell)
-#define rsu_stat(doorbell)	FIELD_GET(DRBL_RSU_STATUS, doorbell)
 
 /* interval 100ms and timeout 5s */
 #define NIOS_HANDSHAKE_INTERVAL_US	(100 * 1000)
@@ -103,29 +105,145 @@
 #define RSU_COMPLETE_TIMEOUT_MS		(40 * 60 * 1000)
 
 /* Addresses for security related data in FLASH */
-#define BMC_REH_ADDR	0x17ffc004
-#define BMC_PROG_ADDR	0x17ffc000
-#define BMC_PROG_MAGIC	0x5746
+#define M10BMC_N3000_BMC_REH_ADDR	0x17ffc004
+#define M10BMC_N3000_BMC_PROG_ADDR	0x17ffc000
+#define M10BMC_N3000_BMC_PROG_MAGIC	0x5746
 
-#define SR_REH_ADDR	0x17ffd004
-#define SR_PROG_ADDR	0x17ffd000
-#define SR_PROG_MAGIC	0x5253
+#define M10BMC_N3000_SR_REH_ADDR	0x17ffd004
+#define M10BMC_N3000_SR_PROG_ADDR	0x17ffd000
+#define M10BMC_N3000_SR_PROG_MAGIC	0x5253
 
-#define PR_REH_ADDR	0x17ffe004
-#define PR_PROG_ADDR	0x17ffe000
-#define PR_PROG_MAGIC	0x5250
+#define M10BMC_N3000_PR_REH_ADDR	0x17ffe004
+#define M10BMC_N3000_PR_PROG_ADDR	0x17ffe000
+#define M10BMC_N3000_PR_PROG_MAGIC	0x5250
 
 /* Address of 4KB inverted bit vector containing staging area FLASH count */
-#define STAGING_FLASH_COUNT	0x17ffb000
+#define M10BMC_N3000_STAGING_FLASH_COUNT	0x17ffb000
+
+#define M10BMC_N6000_INDIRECT_BASE		0x400
+
+#define M10BMC_N6000_SYS_BASE			0x0
+#define M10BMC_N6000_SYS_END			0xfff
+
+#define M10BMC_N6000_DOORBELL			0x1c0
+#define M10BMC_N6000_AUTH_RESULT		0x1c4
+#define AUTH_RESULT_RSU_STATUS			GENMASK(23, 16)
+
+#define M10BMC_N6000_BUILD_VER			0x0
+#define NIOS2_N6000_FW_VERSION			0x4
+#define M10BMC_N6000_MAC_LOW			0x20
+#define M10BMC_N6000_MAC_HIGH			(M10BMC_N6000_MAC_LOW + 4)
+
+/* Addresses for security related data in FLASH */
+#define M10BMC_N6000_BMC_REH_ADDR		0x7ffc004
+#define M10BMC_N6000_BMC_PROG_ADDR		0x7ffc000
+#define M10BMC_N6000_BMC_PROG_MAGIC		0x5746
+
+#define M10BMC_N6000_SR_REH_ADDR		0x7ffd004
+#define M10BMC_N6000_SR_PROG_ADDR		0x7ffd000
+#define M10BMC_N6000_SR_PROG_MAGIC		0x5253
+
+#define M10BMC_N6000_PR_REH_ADDR		0x7ffe004
+#define M10BMC_N6000_PR_PROG_ADDR		0x7ffe000
+#define M10BMC_N6000_PR_PROG_MAGIC		0x5250
+
+#define M10BMC_N6000_STAGING_FLASH_COUNT	0x7ff5000
+
+#define M10BMC_N6000_FLASH_MUX_CTRL		0x1d0
+#define M10BMC_N6000_FLASH_MUX_SELECTION	GENMASK(2, 0)
+#define M10BMC_N6000_FLASH_MUX_IDLE		0
+#define M10BMC_N6000_FLASH_MUX_NIOS		1
+#define M10BMC_N6000_FLASH_MUX_HOST		2
+#define M10BMC_N6000_FLASH_MUX_PFL		4
+#define get_flash_mux(mux)			FIELD_GET(M10BMC_N6000_FLASH_MUX_SELECTION, mux)
+
+#define M10BMC_N6000_FLASH_NIOS_REQUEST		BIT(4)
+#define M10BMC_N6000_FLASH_HOST_REQUEST		BIT(5)
+
+#define M10BMC_N6000_FLASH_CTRL			0x40
+#define M10BMC_N6000_FLASH_WR_MODE		BIT(0)
+#define M10BMC_N6000_FLASH_RD_MODE		BIT(1)
+#define M10BMC_N6000_FLASH_BUSY			BIT(2)
+#define M10BMC_N6000_FLASH_FIFO_SPACE		GENMASK(13, 4)
+#define M10BMC_N6000_FLASH_READ_COUNT		GENMASK(25, 16)
+
+#define M10BMC_N6000_FLASH_ADDR			0x44
+#define M10BMC_N6000_FLASH_FIFO			0x800
+#define M10BMC_N6000_READ_BLOCK_SIZE		0x800
+#define M10BMC_N6000_FIFO_MAX_BYTES		0x800
+#define M10BMC_N6000_FIFO_WORD_SIZE		4
+#define M10BMC_N6000_FIFO_MAX_WORDS		(M10BMC_N6000_FIFO_MAX_BYTES / \
+						 M10BMC_N6000_FIFO_WORD_SIZE)
+
+#define M10BMC_FLASH_INT_US			1
+#define M10BMC_FLASH_TIMEOUT_US			10000
+
+/**
+ * struct m10bmc_csr_map - Intel MAX 10 BMC CSR register map
+ */
+struct m10bmc_csr_map {
+	unsigned int base;
+	unsigned int build_version;
+	unsigned int fw_version;
+	unsigned int mac_low;
+	unsigned int mac_high;
+	unsigned int doorbell;
+	unsigned int auth_result;
+	unsigned int bmc_prog_addr;
+	unsigned int bmc_reh_addr;
+	unsigned int bmc_magic;
+	unsigned int sr_prog_addr;
+	unsigned int sr_reh_addr;
+	unsigned int sr_magic;
+	unsigned int pr_prog_addr;
+	unsigned int pr_reh_addr;
+	unsigned int pr_magic;
+	unsigned int rsu_update_counter;
+};
+
+/**
+ * struct intel_m10bmc_platform_info - Intel MAX 10 BMC platform specific information
+ * @cells: MFD cells
+ * @n_cells: MFD cells ARRAY_SIZE()
+ * @csr_map: the mappings for register definition of MAX10 BMC
+ */
+struct intel_m10bmc_platform_info {
+	struct mfd_cell *cells;
+	int n_cells;
+	const struct m10bmc_csr_map *csr_map;
+};
+
+struct intel_m10bmc;
+
+/**
+ * struct intel_m10bmc_flash_bulk_ops - device specific operations for flash R/W
+ * @read: read a block of data from flash
+ * @write: write a block of data to flash
+ * @lock_write: locks flash access for erase+write
+ * @unlock_write: unlock flash access
+ *
+ * Write must be protected with @lock_write and @unlock_write. While the flash
+ * is locked, @read returns -EBUSY.
+ */
+struct intel_m10bmc_flash_bulk_ops {
+	int (*read)(struct intel_m10bmc *m10bmc, u8 *buf, u32 addr, u32 size);
+	int (*write)(struct intel_m10bmc *m10bmc, const u8 *buf, u32 offset, u32 size);
+	int (*lock_write)(struct intel_m10bmc *m10bmc);
+	void (*unlock_write)(struct intel_m10bmc *m10bmc);
+};
 
 /**
  * struct intel_m10bmc - Intel MAX 10 BMC parent driver data structure
  * @dev: this device
  * @regmap: the regmap used to access registers by m10bmc itself
+ * @info: the platform information for MAX10 BMC
+ * @flash_bulk_ops: optional device specific operations for flash R/W
  */
 struct intel_m10bmc {
 	struct device *dev;
 	struct regmap *regmap;
+	const struct intel_m10bmc_platform_info *info;
+	const struct intel_m10bmc_flash_bulk_ops *flash_bulk_ops;
 };
 
 /*
@@ -152,11 +270,22 @@ m10bmc_raw_read(struct intel_m10bmc *m10bmc, unsigned int addr,
  * The base of the system registers could be configured by HW developers, and
  * in HW SPEC, the base is not added to the addresses of the system registers.
  *
- * This macro helps to simplify the accessing of the system registers. And if
+ * This function helps to simplify the accessing of the system registers. And if
  * the base is reconfigured in HW, SW developers could simply change the
- * M10BMC_SYS_BASE accordingly.
+ * csr_map's base accordingly.
+ */
+static inline int m10bmc_sys_read(struct intel_m10bmc *m10bmc, unsigned int offset,
+				  unsigned int *val)
+{
+	const struct m10bmc_csr_map *csr_map = m10bmc->info->csr_map;
+
+	return m10bmc_raw_read(m10bmc, csr_map->base + offset, val);
+}
+
+/*
+ * MAX10 BMC Core support
  */
-#define m10bmc_sys_read(m10bmc, offset, val) \
-	m10bmc_raw_read(m10bmc, M10BMC_SYS_BASE + (offset), val)
+int m10bmc_dev_init(struct intel_m10bmc *m10bmc, const struct intel_m10bmc_platform_info *info);
+extern const struct attribute_group *m10bmc_dev_groups[];
 
 #endif /* __MFD_INTEL_M10_BMC_H */

include/linux/mfd/intel_soc_pmic.h

@@ -18,6 +18,7 @@ enum intel_cht_wc_models {
 	INTEL_CHT_WC_GPD_WIN_POCKET,
 	INTEL_CHT_WC_XIAOMI_MIPAD2,
 	INTEL_CHT_WC_LENOVO_YOGABOOK1,
+	INTEL_CHT_WC_LENOVO_YT3_X90,
 };
 
 /**

include/linux/mfd/ntxec.h

@@ -34,5 +34,5 @@ static inline u16 ntxec_reg8(u8 value)
 /* Known firmware versions */
 #define NTXEC_VERSION_KOBO_AURA	0xd726	/* found in Kobo Aura */
 #define NTXEC_VERSION_TOLINO_SHINE2 0xf110 /* found in Tolino Shine 2 HD */
-
+#define NTXEC_VERSION_TOLINO_VISION 0xe135 /* found in Tolino Vision, contains RTC, ADC, PWM, home pad */
 #endif

include/linux/mfd/twl.h

@@ -69,6 +69,8 @@ enum twl6030_module_ids {
 	TWL6030_MODULE_GPADC,
 	TWL6030_MODULE_GASGAUGE,
 
+	/* A few extra registers before the registers shared with the 6030 */
+	TWL6032_MODULE_CHARGE,
 	TWL6030_MODULE_LAST,
 };