Commit c2f73eac authored by Felix Fietkau's avatar Felix Fietkau Committed by Kalle Valo

wifi: mt76: mt7915: add back 160MHz channel width support for MT7915

A number of users reported that this support was working fine before
it got removed. Add it back, but leave out the unsupported 80+80 mode.

Fixes: ac922bd6 ("wifi: mt76: mt7915: remove BW160 and BW80+80 support")
Signed-off-by: default avatarFelix Fietkau <nbd@nbd.name>
Signed-off-by: default avatarKalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230301163739.52314-1-nbd@nbd.name
parent 41130c32
......@@ -383,7 +383,6 @@ mt7915_init_wiphy(struct mt7915_phy *phy)
ieee80211_hw_set(hw, SUPPORTS_RX_DECAP_OFFLOAD);
ieee80211_hw_set(hw, SUPPORTS_MULTI_BSSID);
ieee80211_hw_set(hw, WANT_MONITOR_VIF);
ieee80211_hw_set(hw, SUPPORTS_VHT_EXT_NSS_BW);
hw->max_tx_fragments = 4;
......@@ -396,6 +395,9 @@ mt7915_init_wiphy(struct mt7915_phy *phy)
}
if (phy->mt76->cap.has_5ghz) {
struct ieee80211_sta_vht_cap *vht_cap;
vht_cap = &phy->mt76->sband_5g.sband.vht_cap;
phy->mt76->sband_5g.sband.ht_cap.cap |=
IEEE80211_HT_CAP_LDPC_CODING |
IEEE80211_HT_CAP_MAX_AMSDU;
......@@ -403,19 +405,28 @@ mt7915_init_wiphy(struct mt7915_phy *phy)
IEEE80211_HT_MPDU_DENSITY_4;
if (is_mt7915(&dev->mt76)) {
phy->mt76->sband_5g.sband.vht_cap.cap |=
vht_cap->cap |=
IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 |
IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK;
if (!dev->dbdc_support)
vht_cap->cap |=
IEEE80211_VHT_CAP_SHORT_GI_160 |
IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ |
FIELD_PREP(IEEE80211_VHT_CAP_EXT_NSS_BW_MASK, 1);
} else {
phy->mt76->sband_5g.sband.vht_cap.cap |=
vht_cap->cap |=
IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 |
IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK;
/* mt7916 dbdc with 2g 2x2 bw40 and 5g 2x2 bw160c */
phy->mt76->sband_5g.sband.vht_cap.cap |=
vht_cap->cap |=
IEEE80211_VHT_CAP_SHORT_GI_160 |
IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
}
if (!is_mt7915(&dev->mt76) || !dev->dbdc_support)
ieee80211_hw_set(hw, SUPPORTS_VHT_EXT_NSS_BW);
}
mt76_set_stream_caps(phy->mt76, true);
......@@ -841,9 +852,13 @@ mt7915_set_stream_he_txbf_caps(struct mt7915_phy *phy,
int sts = hweight8(phy->mt76->chainmask);
u8 c, sts_160 = sts;
/* mt7915 doesn't support bw160 */
if (is_mt7915(&dev->mt76))
sts_160 = 0;
/* Can do 1/2 of STS in 160Mhz mode for mt7915 */
if (is_mt7915(&dev->mt76)) {
if (!dev->dbdc_support)
sts_160 /= 2;
else
sts_160 = 0;
}
#ifdef CONFIG_MAC80211_MESH
if (vif == NL80211_IFTYPE_MESH_POINT)
......@@ -944,10 +959,15 @@ mt7915_init_he_caps(struct mt7915_phy *phy, enum nl80211_band band,
int i, idx = 0, nss = hweight8(phy->mt76->antenna_mask);
u16 mcs_map = 0;
u16 mcs_map_160 = 0;
u8 nss_160 = nss;
u8 nss_160;
/* Can't do 160MHz with mt7915 */
if (is_mt7915(&dev->mt76))
if (!is_mt7915(&dev->mt76))
nss_160 = nss;
else if (!dev->dbdc_support)
/* Can do 1/2 of NSS streams in 160Mhz mode for mt7915 */
nss_160 = nss / 2;
else
/* Can't do 160MHz with mt7915 dbdc */
nss_160 = 0;
for (i = 0; i < 8; i++) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment