Revert "net: phy: micrel: Restore led_mode and clk_sel on resume"

This reverts commit d7ba3c00 which was
commit 79e498a9 upstream.

Turns out it breaks things, so drop it.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Cc: Dan Rue <dan.rue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/net/phy/micrel.c

@@ -268,12 +268,23 @@ static int kszphy_nand_tree_disable(struct phy_device *phydev)
 	return ret;
 }
 
-/* Some config bits need to be set again on resume, handle them here. */
-static int kszphy_config_reset(struct phy_device *phydev)
+static int kszphy_config_init(struct phy_device *phydev)
 {
 	struct kszphy_priv *priv = phydev->priv;
+	const struct kszphy_type *type;
 	int ret;
 
+	if (!priv)
+		return 0;
+
+	type = priv->type;
+
+	if (type->has_broadcast_disable)
+		kszphy_broadcast_disable(phydev);
+
+	if (type->has_nand_tree_disable)
+		kszphy_nand_tree_disable(phydev);
+
 	if (priv->rmii_ref_clk_sel) {
 		ret = kszphy_rmii_clk_sel(phydev, priv->rmii_ref_clk_sel_val);
 		if (ret) {
@@ -284,7 +295,7 @@ static int kszphy_config_reset(struct phy_device *phydev)
 	}
 
 	if (priv->led_mode >= 0)
-		kszphy_setup_led(phydev, priv->type->led_mode_reg, priv->led_mode);
+		kszphy_setup_led(phydev, type->led_mode_reg, priv->led_mode);
 
 	if (phy_interrupt_is_valid(phydev)) {
 		int ctl = phy_read(phydev, MII_BMCR);
@@ -300,25 +311,6 @@ static int kszphy_config_reset(struct phy_device *phydev)
 	return 0;
 }
 
-static int kszphy_config_init(struct phy_device *phydev)
-{
-	struct kszphy_priv *priv = phydev->priv;
-	const struct kszphy_type *type;
-
-	if (!priv)
-		return 0;
-
-	type = priv->type;
-
-	if (type->has_broadcast_disable)
-		kszphy_broadcast_disable(phydev);
-
-	if (type->has_nand_tree_disable)
-		kszphy_nand_tree_disable(phydev);
-
-	return kszphy_config_reset(phydev);
-}
-
 static int ksz8041_config_init(struct phy_device *phydev)
 {
 	struct device_node *of_node = phydev->mdio.dev.of_node;
@@ -723,14 +715,8 @@ static int kszphy_suspend(struct phy_device *phydev)
 
 static int kszphy_resume(struct phy_device *phydev)
 {
-	int ret;
-
 	genphy_resume(phydev);
 
-	ret = kszphy_config_reset(phydev);
-	if (ret)
-		return ret;
-
 	/* Enable PHY Interrupts */
 	if (phy_interrupt_is_valid(phydev)) {
 		phydev->interrupts = PHY_INTERRUPT_ENABLED;