Commit c3e2485d authored by Maxime Ripard's avatar Maxime Ripard Committed by Greg Kroah-Hartman

dt-bindings: usb: Convert the generic EHCI binding to YAML

The generic EHCI binding is used by many controllers that are using the
EHCI spec.

Convert that binding to a YAML description to enable the validation on all
the nodes using that binding.
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
Acked-by: default avatarChen-Yu Tsai <wens@csie.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent c93bcace
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/generic-ehci.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: USB EHCI Controller Device Tree Bindings
allOf:
- $ref: "usb-hcd.yaml"
maintainers:
- Greg Kroah-Hartman <gregkh@linuxfoundation.org>
properties:
compatible:
contains:
const: generic-ehci
reg:
maxItems: 1
interrupts:
maxItems: 1
resets:
minItems: 1
maxItems: 4
clocks:
minItems: 1
maxItems: 4
description: |
In case the Renesas R-Car Gen3 SoCs:
- if a host only channel: first clock should be host.
- if a USB DRD channel: first clock should be host and second
one should be peripheral
big-endian:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set this flag for HCDs with big endian descriptors and big
endian registers.
big-endian-desc:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set this flag for HCDs with big endian descriptors.
big-endian-regs:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set this flag for HCDs with big endian registers.
has-transaction-translator:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set this flag if EHCI has a Transaction Translator built into
the root hub.
needs-reset-on-resume:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set this flag to force EHCI reset after resume.
phys: true
required:
- compatible
- reg
- interrupts
additionalProperties: false
examples:
- |
ehci@e0000300 {
compatible = "ibm,usb-ehci-440epx", "generic-ehci";
interrupt-parent = <&UIC0>;
interrupts = <0x1a 4>;
reg = <0 0xe0000300 90 0 0xe0000390 70>;
big-endian;
};
- |
ehci0: usb@1c14000 {
compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
interrupts = <39>;
clocks = <&ahb_gates 1>;
phys = <&usbphy 1>;
phy-names = "usb";
};
...
USB EHCI controllers
Required properties:
- compatible : should be "generic-ehci".
- reg : should contain at least address and length of the standard EHCI
register set for the device. Optional platform-dependent registers
(debug-port or other) can be also specified here, but only after
definition of standard EHCI registers.
- interrupts : one EHCI interrupt should be described here.
Optional properties:
- big-endian-regs : boolean, set this for hcds with big-endian registers
- big-endian-desc : boolean, set this for hcds with big-endian descriptors
- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
- needs-reset-on-resume : boolean, set this to force EHCI reset after resume
- has-transaction-translator : boolean, set this if EHCI have a Transaction
Translator built into the root hub.
- clocks : a list of phandle + clock specifier pairs. In case of Renesas
R-Car Gen3 SoCs:
- if a host only channel: first clock should be host.
- if a USB DRD channel: first clock should be host and second one
should be peripheral.
- phys : see usb-hcd.txt in the current directory
- resets : phandle + reset specifier pair
additionally the properties from usb-hcd.txt (in the current directory) are
supported.
Example (Sequoia 440EPx):
ehci@e0000300 {
compatible = "ibm,usb-ehci-440epx", "usb-ehci";
interrupt-parent = <&UIC0>;
interrupts = <1a 4>;
reg = <0 e0000300 90 0 e0000390 70>;
big-endian;
};
Example (Allwinner sun4i A10 SoC):
ehci0: usb@1c14000 {
compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
interrupts = <39>;
clocks = <&ahb_gates 1>;
phys = <&usbphy 1>;
phy-names = "usb";
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment