ASoC: SOF: ipc4-pcm: Workaround for crashed firmware on system suspend

When the system is suspended while audio is active, the
sof_ipc4_pcm_hw_free() is invoked to reset the pipelines since during
suspend the DSP is turned off, streams will be re-started after resume.

If the firmware crashes during while audio is running (or when we reset
the stream before suspend) then the sof_ipc4_set_multi_pipeline_state()
will fail with IPC error and the state change is interrupted.
This will cause misalignment between the kernel and firmware state on next
DSP boot resulting errors returned by firmware for IPC messages, eventually
failing the audio resume.
On stream close the errors are ignored so the kernel state will be
corrected on the next DSP boot, so the second boot after the DSP panic.

If sof_ipc4_trigger_pipelines() is called from sof_ipc4_pcm_hw_free() then
state parameter is SOF_IPC4_PIPE_RESET and only in this case.

Treat a forced pipeline reset similarly to how we treat a pcm_free by
ignoring error on state sending to allow the kernel's state to be
consistent with the state the firmware will have after the next boot.

Link: https://github.com/thesofproject/sof/issues/8721Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240213115233.15716-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

sound/soc/sof/ipc4-pcm.c

@@ -413,7 +413,18 @@ static int sof_ipc4_trigger_pipelines(struct snd_soc_component *component,
 	ret = sof_ipc4_set_multi_pipeline_state(sdev, state, trigger_list);
 	if (ret < 0) {
 		dev_err(sdev->dev, "failed to set final state %d for all pipelines\n", state);
-		goto free;
+		/*
+		 * workaround: if the firmware is crashed while setting the
+		 * pipelines to reset state we must ignore the error code and
+		 * reset it to 0.
+		 * Since the firmware is crashed we will not send IPC messages
+		 * and we are going to see errors printed, but the state of the
+		 * widgets will be correct for the next boot.
+		 */
+		if (sdev->fw_state != SOF_FW_CRASHED || state != SOF_IPC4_PIPE_RESET)
+			goto free;
+
+		ret = 0;
 	}
 
 	/* update RUNNING/RESET state for all pipelines that were just triggered */