Commit c42a880c authored by Hans de Goede's avatar Hans de Goede Committed by Chanwoo Choi

extcon: intel-cht-wc: Ignore failure to detect charger-type on host mode exit

When we leave host-mode because the id-pin is no longer connected to
ground, the 5v boost converter is normally still on, so we will see
Vbus, but it is not from a charger (normally) so the charger-type
detection will fail.

This commit silences the cht_wc_extcon_get_charger() false-positive
errors when we're leaving host mode.
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarChanwoo Choi <cw00.choi@samsung.com>
parent 585cb239
...@@ -96,6 +96,7 @@ struct cht_wc_extcon_data { ...@@ -96,6 +96,7 @@ struct cht_wc_extcon_data {
struct regmap *regmap; struct regmap *regmap;
struct extcon_dev *edev; struct extcon_dev *edev;
unsigned int previous_cable; unsigned int previous_cable;
bool usb_host;
}; };
static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts) static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts)
...@@ -112,7 +113,8 @@ static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts) ...@@ -112,7 +113,8 @@ static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts)
return USB_ID_FLOAT; return USB_ID_FLOAT;
} }
static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext) static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext,
bool ignore_errors)
{ {
int ret, usbsrc, status; int ret, usbsrc, status;
unsigned long timeout; unsigned long timeout;
...@@ -135,6 +137,9 @@ static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext) ...@@ -135,6 +137,9 @@ static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext)
} while (time_before(jiffies, timeout)); } while (time_before(jiffies, timeout));
if (status != CHT_WC_USBSRC_STS_SUCCESS) { if (status != CHT_WC_USBSRC_STS_SUCCESS) {
if (ignore_errors)
return EXTCON_CHG_USB_SDP; /* Save fallback */
if (status == CHT_WC_USBSRC_STS_FAIL) if (status == CHT_WC_USBSRC_STS_FAIL)
dev_warn(ext->dev, "Could not detect charger type\n"); dev_warn(ext->dev, "Could not detect charger type\n");
else else
...@@ -203,6 +208,8 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext) ...@@ -203,6 +208,8 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
{ {
int ret, pwrsrc_sts, id; int ret, pwrsrc_sts, id;
unsigned int cable = EXTCON_NONE; unsigned int cable = EXTCON_NONE;
/* Ignore errors in host mode, as the 5v boost converter is on then */
bool ignore_get_charger_errors = ext->usb_host;
ret = regmap_read(ext->regmap, CHT_WC_PWRSRC_STS, &pwrsrc_sts); ret = regmap_read(ext->regmap, CHT_WC_PWRSRC_STS, &pwrsrc_sts);
if (ret) { if (ret) {
...@@ -223,7 +230,7 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext) ...@@ -223,7 +230,7 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
goto set_state; goto set_state;
} }
ret = cht_wc_extcon_get_charger(ext); ret = cht_wc_extcon_get_charger(ext, ignore_get_charger_errors);
if (ret >= 0) if (ret >= 0)
cable = ret; cable = ret;
...@@ -238,8 +245,8 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext) ...@@ -238,8 +245,8 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
ext->previous_cable = cable; ext->previous_cable = cable;
} }
extcon_set_state_sync(ext->edev, EXTCON_USB_HOST, ext->usb_host = ((id == USB_ID_GND) || (id == USB_RID_A));
id == USB_ID_GND || id == USB_RID_A); extcon_set_state_sync(ext->edev, EXTCON_USB_HOST, ext->usb_host);
} }
static irqreturn_t cht_wc_extcon_isr(int irq, void *data) static irqreturn_t cht_wc_extcon_isr(int irq, void *data)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment