ARM: dts: tegra: move serial aliases to per-board

There are general changes pending to make the /aliases/serial* entries
number the serial ports on the system. On Tegra, so far the ports have
been just numbered dynamically as they are configured so that makes them
change.

To avoid this, add specific aliases per board to keep the old numbers.
This allows us to change the numbering by default on future SoCs while
keeping the numbering on existing boards.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>

arch/arm/boot/dts/tegra114-dalmore.dts

@@ -15,6 +15,7 @@ / {
 	aliases {
 		rtc0 = "/i2c@7000d000/tps65913@58";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
 	};
 
 	memory {

arch/arm/boot/dts/tegra114-roth.dts

@@ -15,6 +15,10 @@ chosen {
 		linux,initrd-end = <0x82800000>;
 	};
 
+	aliases {
+		serial0 = &uartd;
+	};
+
 	firmware {
 		trusted-foundations {
 			compatible = "tlm,trusted-foundations";

arch/arm/boot/dts/tegra114-tn7.dts

@@ -15,6 +15,10 @@ chosen {
 		linux,initrd-end = <0x82800000>;
 	};
 
+	aliases {
+		serial0 = &uartd;
+	};
+
 	firmware {
 		trusted-foundations {
 			compatible = "tlm,trusted-foundations";

arch/arm/boot/dts/tegra114.dtsi

@@ -9,13 +9,6 @@ / {
 	compatible = "nvidia,tegra114";
 	interrupt-parent = <&gic>;
 
-	aliases {
-		serial0 = &uarta;
-		serial1 = &uartb;
-		serial2 = &uartc;
-		serial3 = &uartd;
-	};
-
 	host1x@50000000 {
 		compatible = "nvidia,tegra114-host1x", "simple-bus";
 		reg = <0x50000000 0x00028000>;

arch/arm/boot/dts/tegra124-jetson-tk1.dts

@@ -10,6 +10,7 @@ / {
 	aliases {
 		rtc0 = "/i2c@0,7000d000/pmic@40";
 		rtc1 = "/rtc@0,7000e000";
+		serial0 = &uartd;
 	};
 
 	memory {

arch/arm/boot/dts/tegra124-nyan-big.dts

@@ -10,6 +10,7 @@ / {
 	aliases {
 		rtc0 = "/i2c@0,7000d000/pmic@40";
 		rtc1 = "/rtc@0,7000e000";
+		serial0 = &uarta;
 	};
 
 	memory {

arch/arm/boot/dts/tegra124-venice2.dts

@@ -10,6 +10,7 @@ / {
 	aliases {
 		rtc0 = "/i2c@0,7000d000/pmic@40";
 		rtc1 = "/rtc@0,7000e000";
+		serial0 = &uarta;
 	};
 
 	memory {

arch/arm/boot/dts/tegra20-harmony.dts

@@ -10,6 +10,7 @@ / {
 	aliases {
 		rtc0 = "/i2c@7000d000/tps6586x@34";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
 	};
 
 	memory {

arch/arm/boot/dts/tegra20-iris-512.dts

@@ -6,6 +6,11 @@ / {
 	model = "Toradex Colibri T20 512MB on Iris";
 	compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20";
 
+	aliases {
+		serial0 = &uarta;
+		serial1 = &uartd;
+	};
+
 	host1x@50000000 {
 		hdmi@54280000 {
 			status = "okay";

arch/arm/boot/dts/tegra20-medcom-wide.dts

@@ -6,6 +6,10 @@ / {
 	model = "Avionic Design Medcom-Wide board";
 	compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20";
 
+	aliases {
+		serial0 = &uartd;
+	};
+
 	pwm@7000a000 {
 		status = "okay";
 	};

arch/arm/boot/dts/tegra20-paz00.dts

@@ -10,6 +10,8 @@ / {
 	aliases {
 		rtc0 = "/i2c@7000d000/tps6586x@34";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartc;
 	};
 
 	memory {

arch/arm/boot/dts/tegra20-seaboard.dts

@@ -10,6 +10,7 @@ / {
 	aliases {
 		rtc0 = "/i2c@7000d000/tps6586x@34";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
 	};
 
 	memory {

arch/arm/boot/dts/tegra20-tamonten.dtsi

@@ -7,6 +7,7 @@ / {
 	aliases {
 		rtc0 = "/i2c@7000d000/tps6586x@34";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
 	};
 
 	memory {

arch/arm/boot/dts/tegra20-trimslice.dts

@@ -10,6 +10,7 @@ / {
 	aliases {
 		rtc0 = "/i2c@7000c500/rtc@56";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
 	};
 
 	memory {

arch/arm/boot/dts/tegra20-ventana.dts

@@ -10,6 +10,7 @@ / {
 	aliases {
 		rtc0 = "/i2c@7000d000/tps6586x@34";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
 	};
 
 	memory {

arch/arm/boot/dts/tegra20-whistler.dts

@@ -10,6 +10,7 @@ / {
 	aliases {
 		rtc0 = "/i2c@7000d000/max8907@3c";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
 	};
 
 	memory {

arch/arm/boot/dts/tegra20.dtsi

@@ -9,14 +9,6 @@ / {
 	compatible = "nvidia,tegra20";
 	interrupt-parent = <&intc>;
 
-	aliases {
-		serial0 = &uarta;
-		serial1 = &uartb;
-		serial2 = &uartc;
-		serial3 = &uartd;
-		serial4 = &uarte;
-	};
-
 	host1x@50000000 {
 		compatible = "nvidia,tegra20-host1x", "simple-bus";
 		reg = <0x50000000 0x00024000>;

arch/arm/boot/dts/tegra30-apalis-eval.dts

@@ -11,6 +11,10 @@ aliases {
 		rtc0 = "/i2c@7000c000/rtc@68";
 		rtc1 = "/i2c@7000d000/tps65911@2d";
 		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartc;
+		serial3 = &uartd;
 	};
 
 	pcie-controller@00003000 {

arch/arm/boot/dts/tegra30-beaver.dts

@@ -9,6 +9,7 @@ / {
 	aliases {
 		rtc0 = "/i2c@7000d000/tps65911@2d";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
 	};
 
 	memory {

arch/arm/boot/dts/tegra30-cardhu.dtsi

@@ -30,6 +30,8 @@ / {
 	aliases {
 		rtc0 = "/i2c@7000d000/tps65911@2d";
 		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartc;
 	};
 
 	memory {

arch/arm/boot/dts/tegra30-colibri-eval-v3.dts

@@ -10,6 +10,9 @@ aliases {
 		rtc0 = "/i2c@7000c000/rtc@68";
 		rtc1 = "/i2c@7000d000/tps65911@2d";
 		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartd;
 	};
 
 	host1x@50000000 {

arch/arm/boot/dts/tegra30.dtsi

@@ -9,14 +9,6 @@ / {
 	compatible = "nvidia,tegra30";
 	interrupt-parent = <&intc>;
 
-	aliases {
-		serial0 = &uarta;
-		serial1 = &uartb;
-		serial2 = &uartc;
-		serial3 = &uartd;
-		serial4 = &uarte;
-	};
-
 	pcie-controller@00003000 {
 		compatible = "nvidia,tegra30-pcie";
 		device_type = "pci";