watchdog: imgpdc: Use devm_clk_get_enabled() helper

The devm_clk_get_enabled() helper:
   - calls devm_clk_get()
   - calls clk_prepare_enable() and registers what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids the need of a dedicated function used
with devm_add_action_or_reset().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1f8d1ce1e6a63c507a291aea624b1337326cc563.1672483996.git.christophe.jaillet@wanadoo.frSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

drivers/watchdog/imgpdc_wdt.c

@@ -175,16 +175,11 @@ static const struct watchdog_ops pdc_wdt_ops = {
 	.restart        = pdc_wdt_restart,
 };
 
-static void pdc_clk_disable_unprepare(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static int pdc_wdt_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	u64 div;
-	int ret, val;
+	int val;
 	unsigned long clk_rate;
 	struct pdc_wdt_dev *pdc_wdt;
 
@@ -196,38 +191,18 @@ static int pdc_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(pdc_wdt->base))
 		return PTR_ERR(pdc_wdt->base);
 
-	pdc_wdt->sys_clk = devm_clk_get(dev, "sys");
+	pdc_wdt->sys_clk = devm_clk_get_enabled(dev, "sys");
 	if (IS_ERR(pdc_wdt->sys_clk)) {
 		dev_err(dev, "failed to get the sys clock\n");
 		return PTR_ERR(pdc_wdt->sys_clk);
 	}
 
-	pdc_wdt->wdt_clk = devm_clk_get(dev, "wdt");
+	pdc_wdt->wdt_clk = devm_clk_get_enabled(dev, "wdt");
 	if (IS_ERR(pdc_wdt->wdt_clk)) {
 		dev_err(dev, "failed to get the wdt clock\n");
 		return PTR_ERR(pdc_wdt->wdt_clk);
 	}
 
-	ret = clk_prepare_enable(pdc_wdt->sys_clk);
-	if (ret) {
-		dev_err(dev, "could not prepare or enable sys clock\n");
-		return ret;
-	}
-	ret = devm_add_action_or_reset(dev, pdc_clk_disable_unprepare,
-				       pdc_wdt->sys_clk);
-	if (ret)
-		return ret;
-
-	ret = clk_prepare_enable(pdc_wdt->wdt_clk);
-	if (ret) {
-		dev_err(dev, "could not prepare or enable wdt clock\n");
-		return ret;
-	}
-	ret = devm_add_action_or_reset(dev, pdc_clk_disable_unprepare,
-				       pdc_wdt->wdt_clk);
-	if (ret)
-		return ret;
-
 	/* We use the clock rate to calculate the max timeout */
 	clk_rate = clk_get_rate(pdc_wdt->wdt_clk);
 	if (clk_rate == 0) {