mtd: rawnand: brcmnand: Add individual glue driver selection

Allow each platform to define a dedicated Kconfig entry for its glue
driver such that we can decide on a per-platfomr basis whether to build
it or not. This allows for a finer grained control over the resulting
kernel image or set of modules.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220711222323.4048197-3-f.fainelli@gmail.com

drivers/mtd/nand/raw/brcmnand/Kconfig

@@ -9,6 +9,13 @@ config MTD_NAND_BRCMNAND
 
 if MTD_NAND_BRCMNAND
 
+config MTD_NAND_BRCMNAND_BCM63XX
+	tristate "Broadcom BCM63xx NAND controller glue"
+	default BCM63XX
+	help
+	  Enables the BRCMNAND glue driver to register the NAND controller
+	  on Broadcom BCM63xx MIPS-based DSL platforms.
+
 config MTD_NAND_BRCMNAND_BCMA
 	tristate "Broadcom BCMA NAND controller"
 	depends on BCMA_NFLASH
@@ -18,4 +25,25 @@ config MTD_NAND_BRCMNAND_BCMA
 	  The glue driver will take care of performing the low-level I/O
 	  operations to interface the BRCMNAND controller over the BCMA bus.
 
+config MTD_NAND_BRCMNAND_BCMBCA
+	tristate "Broadcom BCMBCA NAND controller glue"
+	default ARCH_BCMBCA
+	help
+	  Enables the BRCMNAND glue driver to register the NAND controller
+	  on Broadcom BCA platforms.
+
+config MTD_NAND_BRCMNAND_BRCMSTB
+	tristate "Broadcom STB Nand controller glue"
+	default ARCH_BRCMSTB
+	help
+	  Enables the BRCMNAND glue driver to register the NAND controller
+	  on Broadcom STB platforms.
+
+config MTD_NAND_BRCMNAND_IPROC
+	tristate "Broadcom iProc NAND controller glue"
+	default ARCH_BCM_IPROC
+	help
+	  Enables the BRCMNAND controller glue driver to register the NAND
+	  controller on Broadcom iProc platforms.
+
 endif # MTD_NAND_BRCMNAND

drivers/mtd/nand/raw/brcmnand/Makefile

 # SPDX-License-Identifier: GPL-2.0
 # link order matters; don't link the more generic brcmstb_nand.o before the
 # more specific iproc_nand.o, for instance
-obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= iproc_nand.o
-obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= bcm63138_nand.o
-obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= bcm6368_nand.o
-obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmstb_nand.o
+obj-$(CONFIG_MTD_NAND_BRCMNAND_IPROC)	+= iproc_nand.o
+obj-$(CONFIG_MTD_NAND_BRCMNAND_BCMBCA)	+= bcm63138_nand.o
+obj-$(CONFIG_MTD_NAND_BRCMNAND_BCM63XX)	+= bcm6368_nand.o
+obj-$(CONFIG_MTD_NAND_BRCMNAND_BRCMSTB)	+= brcmstb_nand.o
 obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmnand.o
 
 obj-$(CONFIG_MTD_NAND_BRCMNAND_BCMA)	+= bcma_nand.o