media: dt-bindings: Use new video interface bus type macros in examples

Now that a header exists with macros for the media interface bus-type
values, replace hardcoding numerical constants with the corresponding
macros in the DT binding examples.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml

@@ -104,6 +104,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
 
     i2c2 {
         #address-cells = <1>;
@@ -124,7 +125,7 @@ examples:
                     remote-endpoint = <&csi2a_ep>;
                     link-frequencies = /bits/ 64 <199200000 210000000
                                                   499200000>;
-                    bus-type = <4>;
+                    bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
                 };
             };
         };

Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml

@@ -105,6 +105,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
 
     i2c0 {
         #address-cells = <1>;
@@ -118,7 +119,7 @@ examples:
 
             port {
                 ov772x_0: endpoint {
-                    bus-type = <5>;
+                    bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
                     vsync-active = <0>;
                     hsync-active = <0>;
                     pclk-sample = <0>;

Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml

@@ -68,6 +68,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/clock/marvell,mmp2.h>
+    #include <dt-bindings/media/video-interfaces.h>
     #include <dt-bindings/power/marvell,mmp2.h>
 
     camera@d420a000 {
@@ -83,7 +84,7 @@ examples:
       port {
         camera0_0: endpoint {
           remote-endpoint = <&ov7670_0>;
-          bus-type = <5>;      /* Parallel */
+          bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
           hsync-active = <1>;  /* Active high */
           vsync-active = <1>;  /* Active high */
           pclk-sample = <0>;   /* Falling */

Documentation/devicetree/bindings/media/microchip,xisc.yaml

@@ -106,6 +106,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/at91.h>
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/media/video-interfaces.h>
 
     xisc: xisc@e1408000 {
         compatible = "microchip,sama7g5-isc";
@@ -118,7 +119,7 @@ examples:
 
         port {
                 xisc_in: endpoint {
-                       bus-type = <5>; /* Parallel */
+                       bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
                        remote-endpoint = <&csi2dc_out>;
                        hsync-active = <1>;
                        vsync-active = <1>;

Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml

@@ -90,7 +90,9 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/media/video-interfaces.h>
     #include <dt-bindings/reset/stm32mp1-resets.h>
+
     dcmi: dcmi@4c006000 {
         compatible = "st,stm32-dcmi";
         reg = <0x4c006000 0x400>;
@@ -104,7 +106,7 @@ examples:
         port {
              dcmi_0: endpoint {
                    remote-endpoint = <&ov5640_0>;
-                   bus-type = <5>;
+                   bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
                    bus-width = <8>;
                    hsync-active = <0>;
                    vsync-active = <0>;