Commit c5a30f85 authored by Pavel Hofman's avatar Pavel Hofman Committed by Jaroslav Kysela

[ALSA] ice1724 - Misc fixes for Prodigy192

- always set 256fs in SPDIF master clock mode
- disable deemphasis filter in AK4114 for Prodigy192
Signed-off-by: default avatarPavel Hofman <dustin@seznam.cz>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarJaroslav Kysela <perex@suse.cz>
parent bccad14e
......@@ -1666,7 +1666,12 @@ static int snd_vt1724_pro_internal_clock_put(struct snd_kcontrol *kcontrol,
spin_lock_irq(&ice->reg_lock);
oval = inb(ICEMT1724(ice, RATE));
if (ucontrol->value.enumerated.item[0] == spdif) {
unsigned char i2s_oval;
outb(oval | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE));
/* setting 256fs */
i2s_oval = inb(ICEMT1724(ice, I2S_FORMAT));
outb(i2s_oval & ~VT1724_MT_I2S_MCLK_128X,
ICEMT1724(ice, I2S_FORMAT));
} else {
rate = rates[ucontrol->value.integer.value[0] % 15];
if (rate <= get_max_rate(ice)) {
......
......@@ -26,6 +26,13 @@
* CCLK (pin 34) -- GPIO9 pin 76
* CSN (pin 35) -- GPIO8 pin 75
* - output data Mode 7 (24bit, I2S, slave)
* - both MCKO1 and MCKO2 of ak4114 are fed to FPGA, which
* outputs master clock to SPMCLKIN of ice1724.
* Experimentally I found out that only a combination of
* OCKS0=1, OCKS1=1 (128fs, 64fs output) and ice1724 -
* VT1724_MT_I2S_MCLK_128X=0 (256fs input) yields correct
* sampling rate. That means the the FPGA doubles the
* MCK01 rate.
*
* Copyright (c) 2003 Takashi Iwai <tiwai@suse.de>
* Copyright (c) 2003 Dimitromanolakis Apostolos <apostol@cs.utoronto.ca>
......@@ -714,7 +721,10 @@ static int prodigy192_ak4114_init(struct snd_ice1712 *ice)
{
static const unsigned char ak4114_init_vals[] = {
AK4114_RST | AK4114_PWN | AK4114_OCKS0 | AK4114_OCKS1,
AK4114_DIF_I24I2S, /* ice1724 expects I2S and provides clock */
/* ice1724 expects I2S and provides clock,
* DEM0 disables the deemphasis filter
*/
AK4114_DIF_I24I2S | AK4114_DEM0 ,
AK4114_TX1E,
AK4114_EFH_1024 | AK4114_DIT, /* default input RX0 */
0,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment