ARM: dts: broadcom: align gpio-key node names with dtschema

The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts

@@ -70,19 +70,19 @@ usb2 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts

@@ -54,25 +54,25 @@ usb3 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		brightness {
+		button-brightness {
 			label = "Backlight";
 			linux,code = <KEY_BRIGHTNESS_ZERO>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi

@@ -104,33 +104,33 @@ wireless1 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		aoss {
+		button-aoss {
 			label = "AOSS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Commit mode set by switch? */
-		mode {
+		button-mode {
 			label = "Mode";
 			linux,code = <KEY_SETUP>;
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch: AP mode */
-		sw_ap {
+		button-sw-ap {
 			label = "AP";
 			linux,code = <BTN_0>;
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
 
-		eject {
+		button-eject {
 			label = "USB eject";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts

@@ -100,33 +100,33 @@ wireless1 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		aoss {
+		button-aoss {
 			label = "AOSS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Commit mode set by switch? */
-		mode {
+		button-mode {
 			label = "Mode";
 			linux,code = <KEY_SETUP>;
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch: AP mode */
-		sw_ap {
+		button-sw-ap {
 			label = "AP";
 			linux,code = <BTN_0>;
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
 
-		eject {
+		button-eject {
 			label = "USB eject";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts

@@ -29,13 +29,13 @@ nvram@1c080000 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts

@@ -25,13 +25,13 @@ memory@0 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts

@@ -45,7 +45,7 @@ status {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts

@@ -52,7 +52,7 @@ status {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm4708-netgear-r6250.dts

@@ -63,19 +63,19 @@ wireless {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts

@@ -59,19 +59,19 @@ wireless {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts

@@ -94,19 +94,19 @@ wan-red {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts

@@ -60,13 +60,13 @@ usb3 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts

@@ -91,26 +91,26 @@ wireless1 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		aoss {
+		button-aoss {
 			label = "AOSS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch device mode? */
-		mode {
+		button-mode {
 			label = "Mode";
 			linux,code = <KEY_SETUP>;
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
 
-		eject {
+		button-eject {
 			label = "USB eject";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts

@@ -96,7 +96,7 @@ wireless1 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts

@@ -45,7 +45,7 @@ status {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts

@@ -94,7 +94,7 @@ lan1 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts

@@ -77,13 +77,13 @@ usb2-port2 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts

@@ -50,13 +50,13 @@ gpio-keys {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts

@@ -80,39 +80,39 @@ gpio-keys {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		power {
+		button-power {
 			label = "Power";
 			linux,code = <KEY_POWER>;
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 		};
 
-		aoss {
+		button-aoss {
 			label = "AOSS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Commit mode set by switch? */
-		mode {
+		button-mode {
 			label = "Mode";
 			linux,code = <KEY_SETUP>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch: AP mode */
-		sw_ap {
+		button-sw-ap {
 			label = "AP";
 			linux,code = <BTN_0>;
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
 
-		eject {
+		button-eject {
 			label = "USB eject";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm4709-linksys-ea9200.dts

@@ -32,13 +32,13 @@ gpio-keys {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm4709-netgear-r7000.dts

@@ -75,19 +75,19 @@ gpio-keys {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm4709-netgear-r8000.dts

@@ -102,25 +102,25 @@ gpio-keys {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
 
-		brightness {
+		button-brightness {
 			label = "Backlight";
 			linux,code = <KEY_BRIGHTNESS_ZERO>;
 			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts

@@ -80,13 +80,13 @@ gpio-keys {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts

@@ -72,25 +72,25 @@ wps {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
 		};
 
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		wifi {
+		button-wifi {
 			label = "Wi-Fi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
 
-		led {
+		button-led {
 			label = "Backlight";
 			linux,code = <KEY_BRIGHTNESS_ZERO>;
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts

@@ -86,20 +86,20 @@ usb3-white {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch: router / extender */
-		extender {
+		button-extender {
 			label = "Extender";
 			linux,code = <BTN_0>;
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm47094-linksys-panamera.dts

@@ -30,19 +30,19 @@ nvram@1c080000 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 				label = "WiFi";
 				linux,code = <KEY_RFKILL>;
 				gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
 		};
 
-		reset {
+		button-reset {
 				label = "Reset";
 				linux,code = <KEY_RESTART>;
 				gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts

@@ -49,7 +49,7 @@ usb3 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts

@@ -43,7 +43,7 @@ status	{
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts

@@ -49,7 +49,7 @@ usb3 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts

@@ -37,7 +37,7 @@ gpio-keys {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts

@@ -89,7 +89,7 @@ status	{
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts

@@ -67,7 +67,7 @@ status	{
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm47094-netgear-r8500.dts

@@ -65,25 +65,25 @@ usb3 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		brightness {
+		button-brightness {
 			label = "Backlight";
 			linux,code = <KEY_BRIGHTNESS_ZERO>;
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm47094-phicomm-k3.dts

@@ -22,7 +22,7 @@ memory@0 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts

@@ -39,7 +39,7 @@ system {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm47189-luxul-xap-810.dts

@@ -49,7 +49,7 @@ pcie0_leds {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm47189-tenda-ac9.dts

@@ -59,19 +59,19 @@ pcie0_leds {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm53016-meraki-mr32.dts

@@ -50,7 +50,7 @@ keys {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm911360_entphn.dts

@@ -47,10 +47,10 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		hook {
+		button-hook {
 			label = "HOOK";
 			linux,code = <KEY_O>;
 			gpios = <&gpio_asiu 48 0>;

arch/arm/boot/dts/bcm947189acdbmr.dts

@@ -44,13 +44,13 @@ wps {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm953012er.dts

@@ -47,13 +47,13 @@ memory@0 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi

@@ -13,7 +13,7 @@ keys {
 		autorepeat;
 		poll-interval = <20>;
 
-		reset {
+		button-reset {
 			label = "reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpioa 8 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi

@@ -14,7 +14,7 @@ keys {
 		autorepeat;
 		poll-interval = <20>;
 
-		reset {
+		button-reset {
 			label = "reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpioa 6 GPIO_ACTIVE_LOW>;