Skip to content

L
linux
Commit c69cf88c authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'soc-fixes-6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 

Pull ARM SoC fixes from Arnd Bergmann:
 "Another set of fixes for fixes for the soc tree:

   - A fix for the interrupt number on at91/lan966 ethernet PHYs

   - A second round of fixes for NXP i.MX series, including a couple of
     build issues, and board specific DT corrections on TQMa8MPQL,
     imx8mp-venice-gw74xx and imx8mm-verdin for reliability and
     partially broken functionality

   - Several fixes for Rockchip SoCs, addressing a USB issue on
     BPI-R2-Pro, wakeup on Gru-Bob and reliability of high-speed SD
     cards, among other minor issues

   - A fix for a long-running naming mistake that prevented the moxart
     mmc driver from working at all

   - Multiple Arm SCMI firmware fixes for hardening some corner cases"

* tag 'soc-fixes-6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
  arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation
  ARM: dts: lan966x: Fix the interrupt number for internal PHYs
  arm64: dts: imx8mp-venice-gw74xx: fix ksz9477 cpu port
  arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity
  dt-bindings: memory-controllers: fsl,imx8m-ddrc: drop Leonard Crestez
  arm64: dts: tqma8mqml: Include phy-imx8-pcie.h header
  arm64: defconfig: enable ARCH_NXP
  arm64: dts: imx8mp-tqma8mpql-mba8mpxl: add missing pinctrl for RTC alarm
  ARM: dts: fix Moxa SDIO 'compatible', remove 'sdhci' misnomer
  arm64: dts: imx8mm-verdin: extend pmic voltages
  arm64: dts: rockchip: Remove 'enable-active-low' from rk3566-quartz64-a
  arm64: dts: rockchip: Remove 'enable-active-low' from rk3399-puma
  arm64: dts: rockchip: fix property for usb2 phy supply on rk3568-evb1-v10
  arm64: dts: rockchip: fix property for usb2 phy supply on rock-3a
  arm64: dts: imx8ulp: add #reset-cells for pcc
  arm64: dts: tqma8mpxl-ba8mpxl: Fix button GPIOs
  arm64: dts: imx8mn: remove GPU power domain reset
  arm64: dts: rockchip: Set RK3399-Gru PCLK_EDP to 24 MHz
  arm64: dts: imx8mm: Reverse CPLD_Dn GPIO label mapping on MX8Menlo
  arm64: dts: rockchip: fix upper usb port on BPI-R2-Pro
  ...
parents 504c25cb aaa58141
Hide whitespace changes
Inline Side-by-side
Showing with 130 additions and 59 deletions
Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
View file @ c69cf88c
......@@ -34,8 +34,8 @@ Example:
Use specific request line passing from dma
For example, MMC request line is 5
sdhci: sdhci@98e00000 {
compatible = "moxa,moxart-sdhci";
mmc: mmc@98e00000 {
compatible = "moxa,moxart-mmc";
reg = <0x98e00000 0x5C>;
interrupts = <5 0>;
clocks = <&clk_apb>;
......
Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
View file @ c69cf88c
......@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: i.MX8M DDR Controller
maintainers:
- Leonard Crestez <leonard.crestez@nxp.com>
- Peng Fan <peng.fan@nxp.com>
description:
The DDRC block is integrated in i.MX8M for interfacing with DDR based
......
arch/arm/boot/dts/lan966x.dtsi
View file @ c69cf88c
......@@ -541,13 +541,13 @@ mdio1: mdio@e200413c {
phy0: ethernet-phy@1 {
reg = <1>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
phy1: ethernet-phy@2 {
reg = <2>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
......
arch/arm/boot/dts/moxart-uc7112lx.dts
View file @ c69cf88c
......@@ -79,7 +79,7 @@ &clk_pll {
clocks = <&ref12>;
};
&sdhci {
&mmc {
status = "okay";
};
......
arch/arm/boot/dts/moxart.dtsi
View file @ c69cf88c
......@@ -93,8 +93,8 @@ watchdog: watchdog@98500000 {
clock-names = "PCLK";
};
sdhci: sdhci@98e00000 {
compatible = "moxa,moxart-sdhci";
mmc: mmc@98e00000 {
compatible = "moxa,moxart-mmc";
reg = <0x98e00000 0x5C>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_apb>;
......
arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
View file @ c69cf88c
......@@ -152,11 +152,11 @@ &gpio4 {
* CPLD_reset is RESET_SOFT in schematic
*/
gpio-line-names =
"CPLD_D[1]", "CPLD_int", "CPLD_reset", "",
"", "CPLD_D[0]", "", "",
"", "", "", "CPLD_D[2]",
"CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]", "CPLD_D[6]",
"CPLD_D[7]", "", "", "",
"CPLD_D[6]", "CPLD_int", "CPLD_reset", "",
"", "CPLD_D[7]", "", "",
"", "", "", "CPLD_D[5]",
"CPLD_D[4]", "CPLD_D[3]", "CPLD_D[2]", "CPLD_D[1]",
"CPLD_D[0]", "", "", "",
"", "", "", "",
"", "", "", "KBD_intK",
"", "", "", "";
......
arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
View file @ c69cf88c
......@@ -5,7 +5,6 @@
/dts-v1/;
#include <dt-bindings/phy/phy-imx8-pcie.h>
#include "imx8mm-tqma8mqml.dtsi"
#include "mba8mx.dtsi"
......
arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
View file @ c69cf88c
......@@ -3,6 +3,7 @@
* Copyright 2020-2021 TQ-Systems GmbH
*/
#include <dt-bindings/phy/phy-imx8-pcie.h>
#include "imx8mm.dtsi"
/ {
......
arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
View file @ c69cf88c
......@@ -367,8 +367,8 @@ reg_vdd_arm: BUCK2 {
nxp,dvs-standby-voltage = <850000>;
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <950000>;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1050000>;
regulator-min-microvolt = <805000>;
regulator-name = "On-module +VDD_ARM (BUCK2)";
regulator-ramp-delay = <3125>;
};
......@@ -376,8 +376,8 @@ reg_vdd_arm: BUCK2 {
reg_vdd_dram: BUCK3 {
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <950000>;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1000000>;
regulator-min-microvolt = <805000>;
regulator-name = "On-module +VDD_GPU_VPU_DDR (BUCK3)";
};
......@@ -416,7 +416,7 @@ reg_nvcc_snvs: LDO1 {
reg_vdd_snvs: LDO2 {
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <900000>;
regulator-max-microvolt = <800000>;
regulator-min-microvolt = <800000>;
regulator-name = "On-module +V0.8_SNVS (LDO2)";
};
......
arch/arm64/boot/dts/freescale/imx8mn.dtsi
View file @ c69cf88c
......@@ -672,7 +672,6 @@ pgc_gpumix: power-domain@2 {
<&clk IMX8MN_CLK_GPU_SHADER>,
<&clk IMX8MN_CLK_GPU_BUS_ROOT>,
<&clk IMX8MN_CLK_GPU_AHB>;
resets = <&src IMX8MQ_RESET_GPU_RESET>;
};
pgc_dispmix: power-domain@3 {
......
arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
View file @ c69cf88c
......@@ -57,13 +57,13 @@ gpio-keys {
switch-1 {
label = "S12";
linux,code = <BTN_0>;
gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
};
switch-2 {
label = "S13";
linux,code = <BTN_1>;
gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
};
};
......@@ -394,6 +394,8 @@ &i2c6 {
&pcf85063 {
/* RTC_EVENT# is connected on MBa8MPxL */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcf85063>;
interrupt-parent = <&gpio4>;
interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
};
......@@ -630,6 +632,10 @@ pinctrl_lvdsdisplay: lvdsdisplaygrp {
fsl,pins = <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x10>; /* Power enable */
};
pinctrl_pcf85063: pcf85063grp {
fsl,pins = <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x80>;
};
/* LVDS Backlight */
pinctrl_pwm2: pwm2grp {
fsl,pins = <MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT 0x14>;
......
arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
View file @ c69cf88c
......@@ -123,8 +123,7 @@ reg_can2_stby: regulator-can2-stby {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_can>;
regulator-name = "can2_stby";
gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
......@@ -484,35 +483,40 @@ ports {
lan1: port@0 {
reg = <0>;
label = "lan1";
phy-mode = "internal";
local-mac-address = [00 00 00 00 00 00];
};
lan2: port@1 {
reg = <1>;
label = "lan2";
phy-mode = "internal";
local-mac-address = [00 00 00 00 00 00];
};
lan3: port@2 {
reg = <2>;
label = "lan3";
phy-mode = "internal";
local-mac-address = [00 00 00 00 00 00];
};
lan4: port@3 {
reg = <3>;
label = "lan4";
phy-mode = "internal";
local-mac-address = [00 00 00 00 00 00];
};
lan5: port@4 {
reg = <4>;
label = "lan5";
phy-mode = "internal";
local-mac-address = [00 00 00 00 00 00];
};
port@6 {
reg = <6>;
port@5 {
reg = <5>;
label = "cpu";
ethernet = <&fec>;
phy-mode = "rgmii-id";
......
arch/arm64/boot/dts/freescale/imx8ulp.dtsi
View file @ c69cf88c
......@@ -172,6 +172,7 @@ pcc3: clock-controller@292d0000 {
compatible = "fsl,imx8ulp-pcc3";
reg = <0x292d0000 0x10000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
tpm5: tpm@29340000 {
......@@ -270,6 +271,7 @@ pcc4: clock-controller@29800000 {
compatible = "fsl,imx8ulp-pcc4";
reg = <0x29800000 0x10000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
lpi2c6: i2c@29840000 {
......@@ -414,6 +416,7 @@ pcc5: clock-controller@2da70000 {
compatible = "fsl,imx8ulp-pcc5";
reg = <0x2da70000 0x10000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
};
......
arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi
View file @ c69cf88c
......@@ -2,8 +2,8 @@
/*
* Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
* Copyright (c) 2020 Engicam srl
* Copyright (c) 2020 Amarula Solutons
* Copyright (c) 2020 Amarula Solutons(India)
* Copyright (c) 2020 Amarula Solutions
* Copyright (c) 2020 Amarula Solutions(India)
*/
#include <dt-bindings/gpio/gpio.h>
......
arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
View file @ c69cf88c
......@@ -88,3 +88,8 @@ h1_int_od_l: h1-int-od-l {
};
};
};
&wlan_host_wake_l {
/* Kevin has an external pull up, but Bob does not. */
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
};
arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
View file @ c69cf88c
......@@ -244,6 +244,14 @@ &dmc {
&edp {
status = "okay";
/*
* eDP PHY/clk don't sync reliably at anything other than 24 MHz. Only
* set this here, because rk3399-gru.dtsi ensures we can generate this
* off GPLL=600MHz, whereas some other RK3399 boards may not.
*/
assigned-clocks = <&cru PCLK_EDP>;
assigned-clock-rates = <24000000>;
ports {
edp_out: port@1 {
reg = <1>;
......@@ -578,6 +586,7 @@ wifi_perst_l: wifi-perst-l {
};
wlan_host_wake_l: wlan-host-wake-l {
/* Kevin has an external pull up, but Bob does not */
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
View file @ c69cf88c
......@@ -62,7 +62,6 @@ vcc3v3_sys: vcc3v3-sys {
vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
enable-active-low;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en>;
regulator-name = "vcc5v0_host";
......
arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
View file @ c69cf88c
......@@ -189,7 +189,6 @@ vcc5v0_usb20_otg: vcc5v0_usb20_otg {
vcc3v3_sd: vcc3v3_sd {
compatible = "regulator-fixed";
enable-active-low;
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&vcc_sd_h>;
......
arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
View file @ c69cf88c
......@@ -506,7 +506,7 @@ &sdmmc0 {
disable-wp;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
sd-uhs-sdr104;
sd-uhs-sdr50;
vmmc-supply = <&vcc3v3_sd>;
vqmmc-supply = <&vccio_sd>;
status = "okay";
......
arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
View file @ c69cf88c
......@@ -678,7 +678,7 @@ &usb_host0_ohci {
};
&usb_host0_xhci {
extcon = <&usb2phy0>;
dr_mode = "host";
status = "okay";
};
......
arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
View file @ c69cf88c
......@@ -656,7 +656,7 @@ &usb2phy0_host {
};
&usb2phy0_otg {
vbus-supply = <&vcc5v0_usb_otg>;
phy-supply = <&vcc5v0_usb_otg>;
status = "okay";
};
......
arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
View file @ c69cf88c
......@@ -581,7 +581,7 @@ &usb2phy0_host {
};
&usb2phy0_otg {
vbus-supply = <&vcc5v0_usb_otg>;
phy-supply = <&vcc5v0_usb_otg>;
status = "okay";
};
......
arch/arm64/configs/defconfig
View file @ c69cf88c
......@@ -48,6 +48,7 @@ CONFIG_ARCH_KEEMBAY=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_ARCH_MESON=y
CONFIG_ARCH_MVEBU=y
CONFIG_ARCH_NXP=y
CONFIG_ARCH_MXC=y
CONFIG_ARCH_NPCM=y
CONFIG_ARCH_QCOM=y
......
drivers/firmware/arm_scmi/clock.c
View file @ c69cf88c
......@@ -450,9 +450,13 @@ static int scmi_clock_count_get(const struct scmi_protocol_handle *ph)
static const struct scmi_clock_info *
scmi_clock_info_get(const struct scmi_protocol_handle *ph, u32 clk_id)
{
struct scmi_clock_info *clk;
struct clock_info *ci = ph->get_priv(ph);
struct scmi_clock_info *clk = ci->clk + clk_id;
if (clk_id >= ci->num_clocks)
return NULL;
clk = ci->clk + clk_id;
if (!clk->name[0])
return NULL;
......
drivers/firmware/arm_scmi/optee.c
View file @ c69cf88c
......@@ -106,6 +106,7 @@ enum scmi_optee_pta_cmd {
* @channel_id: OP-TEE channel ID used for this transport
* @tee_session: TEE session identifier
* @caps: OP-TEE SCMI channel capabilities
* @rx_len: Response size
* @mu: Mutex protection on channel access
* @cinfo: SCMI channel information
* @shmem: Virtual base address of the shared memory
......
drivers/firmware/arm_scmi/reset.c
View file @ c69cf88c
......@@ -166,9 +166,13 @@ static int scmi_domain_reset(const struct scmi_protocol_handle *ph, u32 domain,
struct scmi_xfer *t;
struct scmi_msg_reset_domain_reset *dom;
struct scmi_reset_info *pi = ph->get_priv(ph);
struct reset_dom_info *rdom = pi->dom_info + domain;
struct reset_dom_info *rdom;
if (rdom->async_reset)
if (domain >= pi->num_domains)
return -EINVAL;
rdom = pi->dom_info + domain;
if (rdom->async_reset && flags & AUTONOMOUS_RESET)
flags |= ASYNCHRONOUS_RESET;
ret = ph->xops->xfer_get_init(ph, RESET, sizeof(*dom), 0, &t);
......@@ -180,7 +184,7 @@ static int scmi_domain_reset(const struct scmi_protocol_handle *ph, u32 domain,
dom->flags = cpu_to_le32(flags);
dom->reset_state = cpu_to_le32(state);
if (rdom->async_reset)
if (flags & ASYNCHRONOUS_RESET)
ret = ph->xops->do_xfer_with_response(ph, t);
else
ret = ph->xops->do_xfer(ph, t);
......
drivers/firmware/arm_scmi/scmi_pm_domain.c
View file @ c69cf88c
......@@ -138,9 +138,28 @@ static int scmi_pm_domain_probe(struct scmi_device *sdev)
scmi_pd_data->domains = domains;
scmi_pd_data->num_domains = num_domains;
dev_set_drvdata(dev, scmi_pd_data);
return of_genpd_add_provider_onecell(np, scmi_pd_data);
}
static void scmi_pm_domain_remove(struct scmi_device *sdev)
{
int i;
struct genpd_onecell_data *scmi_pd_data;
struct device *dev = &sdev->dev;
struct device_node *np = dev->of_node;
of_genpd_del_provider(np);
scmi_pd_data = dev_get_drvdata(dev);
for (i = 0; i < scmi_pd_data->num_domains; i++) {
if (!scmi_pd_data->domains[i])
continue;
pm_genpd_remove(scmi_pd_data->domains[i]);
}
}
static const struct scmi_device_id scmi_id_table[] = {
{ SCMI_PROTOCOL_POWER, "genpd" },
{ },
......@@ -150,6 +169,7 @@ MODULE_DEVICE_TABLE(scmi, scmi_id_table);
static struct scmi_driver scmi_power_domain_driver = {
.name = "scmi-power-domain",
.probe = scmi_pm_domain_probe,
.remove = scmi_pm_domain_remove,
.id_table = scmi_id_table,
};
module_scmi_driver(scmi_power_domain_driver);
......
drivers/firmware/arm_scmi/sensors.c
View file @ c69cf88c
......@@ -762,6 +762,10 @@ static int scmi_sensor_config_get(const struct scmi_protocol_handle *ph,
{
int ret;
struct scmi_xfer *t;
struct sensors_info *si = ph->get_priv(ph);
if (sensor_id >= si->num_sensors)
return -EINVAL;
ret = ph->xops->xfer_get_init(ph, SENSOR_CONFIG_GET,
sizeof(__le32), sizeof(__le32), &t);
......@@ -771,7 +775,6 @@ static int scmi_sensor_config_get(const struct scmi_protocol_handle *ph,
put_unaligned_le32(sensor_id, t->tx.buf);
ret = ph->xops->do_xfer(ph, t);
if (!ret) {
struct sensors_info *si = ph->get_priv(ph);
struct scmi_sensor_info *s = si->sensors + sensor_id;
*sensor_config = get_unaligned_le64(t->rx.buf);
......@@ -788,6 +791,10 @@ static int scmi_sensor_config_set(const struct scmi_protocol_handle *ph,
int ret;
struct scmi_xfer *t;
struct scmi_msg_sensor_config_set *msg;
struct sensors_info *si = ph->get_priv(ph);
if (sensor_id >= si->num_sensors)
return -EINVAL;
ret = ph->xops->xfer_get_init(ph, SENSOR_CONFIG_SET,
sizeof(*msg), 0, &t);
......@@ -800,7 +807,6 @@ static int scmi_sensor_config_set(const struct scmi_protocol_handle *ph,
ret = ph->xops->do_xfer(ph, t);
if (!ret) {
struct sensors_info *si = ph->get_priv(ph);
struct scmi_sensor_info *s = si->sensors + sensor_id;
s->sensor_config = sensor_config;
......@@ -831,8 +837,11 @@ static int scmi_sensor_reading_get(const struct scmi_protocol_handle *ph,
int ret;
struct scmi_xfer *t;
struct scmi_msg_sensor_reading_get *sensor;
struct scmi_sensor_info *s;
struct sensors_info *si = ph->get_priv(ph);
struct scmi_sensor_info *s = si->sensors + sensor_id;
if (sensor_id >= si->num_sensors)
return -EINVAL;
ret = ph->xops->xfer_get_init(ph, SENSOR_READING_GET,
sizeof(*sensor), 0, &t);
......@@ -841,6 +850,7 @@ static int scmi_sensor_reading_get(const struct scmi_protocol_handle *ph,
sensor = t->tx.buf;
sensor->id = cpu_to_le32(sensor_id);
s = si->sensors + sensor_id;
if (s->async) {
sensor->flags = cpu_to_le32(SENSOR_READ_ASYNC);
ret = ph->xops->do_xfer_with_response(ph, t);
......@@ -895,9 +905,13 @@ scmi_sensor_reading_get_timestamped(const struct scmi_protocol_handle *ph,
int ret;
struct scmi_xfer *t;
struct scmi_msg_sensor_reading_get *sensor;
struct scmi_sensor_info *s;
struct sensors_info *si = ph->get_priv(ph);
struct scmi_sensor_info *s = si->sensors + sensor_id;
if (sensor_id >= si->num_sensors)
return -EINVAL;
s = si->sensors + sensor_id;
if (!count || !readings ||
(!s->num_axis && count > 1) || (s->num_axis && count > s->num_axis))
return -EINVAL;
......@@ -948,6 +962,9 @@ scmi_sensor_info_get(const struct scmi_protocol_handle *ph, u32 sensor_id)
{
struct sensors_info *si = ph->get_priv(ph);
if (sensor_id >= si->num_sensors)
return NULL;
return si->sensors + sensor_id;
}
......
include/linux/scmi_protocol.h
View file @ c69cf88c
......@@ -84,7 +84,7 @@ struct scmi_protocol_handle;
struct scmi_clk_proto_ops {
int (*count_get)(const struct scmi_protocol_handle *ph);
const struct scmi_clock_info *(*info_get)
const struct scmi_clock_info __must_check *(*info_get)
(const struct scmi_protocol_handle *ph, u32 clk_id);
int (*rate_get)(const struct scmi_protocol_handle *ph, u32 clk_id,
u64 *rate);
......@@ -466,7 +466,7 @@ enum scmi_sensor_class {
*/
struct scmi_sensor_proto_ops {
int (*count_get)(const struct scmi_protocol_handle *ph);
const struct scmi_sensor_info *(*info_get)
const struct scmi_sensor_info __must_check *(*info_get)
(const struct scmi_protocol_handle *ph, u32 sensor_id);
int (*trip_point_config)(const struct scmi_protocol_handle *ph,
u32 sensor_id, u8 trip_id, u64 trip_value);
......
include/trace/events/scmi.h
View file @ c69cf88c
......@@ -27,9 +27,9 @@ TRACE_EVENT(scmi_fc_call,
__entry->val2 = val2;
),
TP_printk("[0x%02X]:[0x%02X]:[%08X]:%u:%u",
__entry->protocol_id, __entry->msg_id,
__entry->res_id, __entry->val1, __entry->val2)
TP_printk("pt=%02X msg_id=%02X res_id:%u vals=%u:%u",
__entry->protocol_id, __entry->msg_id,
__entry->res_id, __entry->val1, __entry->val2)
);
TRACE_EVENT(scmi_xfer_begin,
......@@ -53,9 +53,9 @@ TRACE_EVENT(scmi_xfer_begin,
__entry->poll = poll;
),
TP_printk("transfer_id=%d msg_id=%u protocol_id=%u seq=%u poll=%u",
__entry->transfer_id, __entry->msg_id, __entry->protocol_id,
__entry->seq, __entry->poll)
TP_printk("pt=%02X msg_id=%02X seq=%04X transfer_id=%X poll=%u",
__entry->protocol_id, __entry->msg_id, __entry->seq,
__entry->transfer_id, __entry->poll)
);
TRACE_EVENT(scmi_xfer_response_wait,
......@@ -81,9 +81,9 @@ TRACE_EVENT(scmi_xfer_response_wait,
__entry->poll = poll;
),
TP_printk("transfer_id=%d msg_id=%u protocol_id=%u seq=%u tmo_ms=%u poll=%u",
__entry->transfer_id, __entry->msg_id, __entry->protocol_id,
__entry->seq, __entry->timeout, __entry->poll)
TP_printk("pt=%02X msg_id=%02X seq=%04X transfer_id=%X tmo_ms=%u poll=%u",
__entry->protocol_id, __entry->msg_id, __entry->seq,
__entry->transfer_id, __entry->timeout, __entry->poll)
);
TRACE_EVENT(scmi_xfer_end,
......@@ -107,9 +107,9 @@ TRACE_EVENT(scmi_xfer_end,
__entry->status = status;
),
TP_printk("transfer_id=%d msg_id=%u protocol_id=%u seq=%u status=%d",
__entry->transfer_id, __entry->msg_id, __entry->protocol_id,
__entry->seq, __entry->status)
TP_printk("pt=%02X msg_id=%02X seq=%04X transfer_id=%X s=%d",
__entry->protocol_id, __entry->msg_id, __entry->seq,
__entry->transfer_id, __entry->status)
);
TRACE_EVENT(scmi_rx_done,
......@@ -133,9 +133,9 @@ TRACE_EVENT(scmi_rx_done,
__entry->msg_type = msg_type;
),
TP_printk("transfer_id=%d msg_id=%u protocol_id=%u seq=%u msg_type=%u",
__entry->transfer_id, __entry->msg_id, __entry->protocol_id,
__entry->seq, __entry->msg_type)
TP_printk("pt=%02X msg_id=%02X seq=%04X transfer_id=%X msg_type=%u",
__entry->protocol_id, __entry->msg_id, __entry->seq,
__entry->transfer_id, __entry->msg_type)
);
TRACE_EVENT(scmi_msg_dump,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7