Commit c6a7ed77 authored by Bailey Forrest's avatar Bailey Forrest Committed by David S. Miller

gve: Update GVE documentation to describe DQO

DQO is a new descriptor format for our next generation virtual NIC.
Signed-off-by: default avatarBailey Forrest <bcf@google.com>
Reviewed-by: default avatarWillem de Bruijn <willemb@google.com>
Reviewed-by: default avatarCatherine Sullivan <csully@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 47889068
......@@ -47,13 +47,24 @@ The driver interacts with the device in the following ways:
- Transmit and Receive Queues
- See description below
Descriptor Formats
------------------
GVE supports two descriptor formats: GQI and DQO. These two formats have
entirely different descriptors, which will be described below.
Registers
---------
All registers are MMIO and big endian.
All registers are MMIO.
The registers are used for initializing and configuring the device as well as
querying device status in response to management interrupts.
Endianness
----------
- Admin Queue messages and registers are all Big Endian.
- GQI descriptors and datapath registers are Big Endian.
- DQO descriptors and datapath registers are Little Endian.
Admin Queue (AQ)
----------------
The Admin Queue is a PAGE_SIZE memory block, treated as an array of AQ
......@@ -97,10 +108,10 @@ the queues associated with that interrupt.
The handler for these irqs schedule the napi for that block to run
and poll the queues.
Traffic Queues
--------------
gVNIC's queues are composed of a descriptor ring and a buffer and are
assigned to a notification block.
GQI Traffic Queues
------------------
GQI queues are composed of a descriptor ring and a buffer and are assigned to a
notification block.
The descriptor rings are power-of-two-sized ring buffers consisting of
fixed-size descriptors. They advance their head pointer using a __be32
......@@ -121,3 +132,35 @@ Receive
The buffers for receive rings are put into a data ring that is the same
length as the descriptor ring and the head and tail pointers advance over
the rings together.
DQO Traffic Queues
------------------
- Every TX and RX queue is assigned a notification block.
- TX and RX buffers queues, which send descriptors to the device, use MMIO
doorbells to notify the device of new descriptors.
- RX and TX completion queues, which receive descriptors from the device, use a
"generation bit" to know when a descriptor was populated by the device. The
driver initializes all bits with the "current generation". The device will
populate received descriptors with the "next generation" which is inverted
from the current generation. When the ring wraps, the current/next generation
are swapped.
- It's the driver's responsibility to ensure that the RX and TX completion
queues are not overrun. This can be accomplished by limiting the number of
descriptors posted to HW.
- TX packets have a 16 bit completion_tag and RX buffers have a 16 bit
buffer_id. These will be returned on the TX completion and RX queues
respectively to let the driver know which packet/buffer was completed.
Transmit
~~~~~~~~
A packet's buffers are DMA mapped for the device to access before transmission.
After the packet was successfully transmitted, the buffers are unmapped.
Receive
~~~~~~~
The driver posts fixed sized buffers to HW on the RX buffer queue. The packet
received on the associated RX queue may span multiple descriptors.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment