rtc: Ramtron FM3130 RTC support

Ramtron FM3130 is a chip with two separate devices inside, RTC clock and
FRAM.  This driver provides only RTC functionality.

This chip is met in lots of custom boards with AT91SAMXXXX CPU I work
with, is cheap and in no way better or worse than any other RTC on market.
 While it is mostly met on much smaller devices, I think it is great to
have it supported in Linux.
Signed-off-by: Sergey Lapin <slapin@ossfans.org>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/Kconfig

@@ -256,6 +256,17 @@ config RTC_DRV_S35390A
 	  This driver can also be built as a module. If so the module
 	  will be called rtc-s35390a.
 
+config RTC_DRV_FM3130
+	tristate "Ramtron FM3130"
+	help
+	  If you say Y here you will get support for the
+	  Ramtron FM3130 RTC chips.
+	  Ramtron FM3130 is a chip with two separate devices inside,
+	  RTC clock and FRAM. This driver provides only RTC functionality.
+
+	  This driver can also be built as a module. If so the module
+	  will be called rtc-fm3130.
+
 endif # I2C
 
 comment "SPI RTC drivers"

drivers/rtc/Makefile

@@ -31,6 +31,7 @@ obj-$(CONFIG_RTC_DRV_DS1553)	+= rtc-ds1553.o
 obj-$(CONFIG_RTC_DRV_DS1672)	+= rtc-ds1672.o
 obj-$(CONFIG_RTC_DRV_DS1742)	+= rtc-ds1742.o
 obj-$(CONFIG_RTC_DRV_EP93XX)	+= rtc-ep93xx.o
+obj-$(CONFIG_RTC_DRV_FM3130)	+= rtc-fm3130.o
 obj-$(CONFIG_RTC_DRV_ISL1208)	+= rtc-isl1208.o
 obj-$(CONFIG_RTC_DRV_M41T80)	+= rtc-m41t80.o
 obj-$(CONFIG_RTC_DRV_M48T59)	+= rtc-m48t59.o
@@ -41,6 +42,7 @@ obj-$(CONFIG_RTC_DRV_OMAP)	+= rtc-omap.o
 obj-$(CONFIG_RTC_DRV_PCF8563)	+= rtc-pcf8563.o
 obj-$(CONFIG_RTC_DRV_PCF8583)	+= rtc-pcf8583.o
 obj-$(CONFIG_RTC_DRV_PL031)	+= rtc-pl031.o
+obj-$(CONFIG_RTC_DRV_PPC)	+= rtc-ppc.o
 obj-$(CONFIG_RTC_DRV_R9701)	+= rtc-r9701.o
 obj-$(CONFIG_RTC_DRV_RS5C313)	+= rtc-rs5c313.o
 obj-$(CONFIG_RTC_DRV_RS5C348)	+= rtc-rs5c348.o
@@ -54,4 +56,3 @@ obj-$(CONFIG_RTC_DRV_TEST)	+= rtc-test.o
 obj-$(CONFIG_RTC_DRV_V3020)	+= rtc-v3020.o
 obj-$(CONFIG_RTC_DRV_VR41XX)	+= rtc-vr41xx.o
 obj-$(CONFIG_RTC_DRV_X1205)	+= rtc-x1205.o
-obj-$(CONFIG_RTC_DRV_PPC)	+= rtc-ppc.o