spi: s3c64xx: determine the fifo depth only once

Determine the FIFO depth only once, at probe time.
``sdd->fifo_depth`` can be set later on with the FIFO depth
specified in the device tree.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://msgid.link/r/20240216070555.2483977-5-tudor.ambarus@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

drivers/spi/spi-s3c64xx.c

@@ -191,6 +191,7 @@ struct s3c64xx_spi_port_config {
  * @tx_dma: Local transmit DMA data (e.g. chan and direction)
  * @port_conf: Local SPI port configuration data
  * @port_id: Port identification number
+ * @fifo_depth: depth of the FIFO.
  * @rx_fifomask: SPI_STATUS.RX_FIFO_LVL mask. Shifted mask defining the field's
  *               length and position.
  * @tx_fifomask: SPI_STATUS.TX_FIFO_LVL mask. Shifted mask defining the field's
@@ -214,6 +215,7 @@ struct s3c64xx_spi_driver_data {
 	struct s3c64xx_spi_dma_data	tx_dma;
 	const struct s3c64xx_spi_port_config	*port_conf;
 	unsigned int			port_id;
+	unsigned int			fifo_depth;
 	u32				rx_fifomask;
 	u32				tx_fifomask;
 };
@@ -424,7 +426,7 @@ static bool s3c64xx_spi_can_dma(struct spi_controller *host,
 	struct s3c64xx_spi_driver_data *sdd = spi_controller_get_devdata(host);
 
 	if (sdd->rx_dma.ch && sdd->tx_dma.ch)
-		return xfer->len > FIFO_DEPTH(sdd);
+		return xfer->len > sdd->fifo_depth;
 
 	return false;
 }
@@ -548,7 +550,7 @@ static u32 s3c64xx_spi_wait_for_timeout(struct s3c64xx_spi_driver_data *sdd,
 	void __iomem *regs = sdd->regs;
 	unsigned long val = 1;
 	u32 status;
-	u32 max_fifo = FIFO_DEPTH(sdd);
+	u32 max_fifo = sdd->fifo_depth;
 
 	if (timeout_ms)
 		val = msecs_to_loops(timeout_ms);
@@ -655,7 +657,7 @@ static int s3c64xx_wait_for_pio(struct s3c64xx_spi_driver_data *sdd,
 	 * For any size less than the fifo size the below code is
 	 * executed atleast once.
 	 */
-	loops = xfer->len / FIFO_DEPTH(sdd);
+	loops = xfer->len / sdd->fifo_depth;
 	buf = xfer->rx_buf;
 	do {
 		/* wait for data to be received in the fifo */
@@ -792,7 +794,7 @@ static int s3c64xx_spi_transfer_one(struct spi_controller *host,
 				    struct spi_transfer *xfer)
 {
 	struct s3c64xx_spi_driver_data *sdd = spi_controller_get_devdata(host);
-	const unsigned int fifo_len = FIFO_DEPTH(sdd);
+	const unsigned int fifo_len = sdd->fifo_depth;
 	const void *tx_buf = NULL;
 	void *rx_buf = NULL;
 	int target_len = 0, origin_len = 0;
@@ -1261,6 +1263,8 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
 		sdd->port_id = pdev->id;
 	}
 
+	sdd->fifo_depth = FIFO_DEPTH(sdd);
+
 	s3c64xx_spi_set_fifomask(sdd);
 
 	sdd->cur_bpw = 8;
@@ -1352,7 +1356,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
 	dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d with %d Targets attached\n",
 					sdd->port_id, host->num_chipselect);
 	dev_dbg(&pdev->dev, "\tIOmem=[%pR]\tFIFO %dbytes\n",
-					mem_res, FIFO_DEPTH(sdd));
+		mem_res, sdd->fifo_depth);
 
 	pm_runtime_mark_last_busy(&pdev->dev);
 	pm_runtime_put_autosuspend(&pdev->dev);