rt2x00: Correct initial value of US_CYC_CNT register for pcie interface

CLOCK CYCLE: Clock cycle count in 1us
PCI:0x21, PCIE:0x7d, USB:0x1e
Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/rt2x00/rt2800.h

@@ -372,8 +372,12 @@
 
 /*
  * US_CYC_CNT
+ * BT_MODE_EN: Bluetooth mode enable
+ * CLOCK CYCLE: Clock cycle count in 1us.
+ * PCI:0x21, PCIE:0x7d, USB:0x1e
  */
 #define US_CYC_CNT			0x02a4
+#define US_CYC_CNT_BT_MODE_EN		FIELD32(0x00000100)
 #define US_CYC_CNT_CLOCK_CYCLE		FIELD32(0x000000ff)
 
 /*

drivers/net/wireless/rt2x00/rt2800lib.c

@@ -2207,6 +2207,10 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 		rt2800_register_read(rt2x00dev, US_CYC_CNT, &reg);
 		rt2x00_set_field32(&reg, US_CYC_CNT_CLOCK_CYCLE, 30);
 		rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
+	} else if (rt2x00_is_pcie(rt2x00dev)) {
+		rt2800_register_read(rt2x00dev, US_CYC_CNT, &reg);
+		rt2x00_set_field32(&reg, US_CYC_CNT_CLOCK_CYCLE, 125);
+		rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
 	}
 
 	rt2800_register_read(rt2x00dev, HT_FBK_CFG0, &reg);