Merge tag 'spi-fix-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:

 - Fixes for long standing issues with accesses to spidev->spi during
   teardown in the spidev userspace driver.

 - Rename the newly added spi-cs-setup-ns DT property to be more in line
   with our other delay properties before it becomes ABI.

 - A few driver specific fixes.

* tag 'spi-fix-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spidev: remove debug messages that access spidev->spi without locking
  spi: spidev: fix a race condition when accessing spidev->spi
  spi: Rename spi-cs-setup-ns property to spi-cs-setup-delay-ns
  spi: dt-bindings: Rename spi-cs-setup-ns to spi-cs-setup-delay-ns
  spi: cadence: Fix busy cycles calculation
  spi: mediatek: Enable irq before the spi registration

Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml

@@ -44,9 +44,9 @@ properties:
     description:
       Maximum SPI clocking speed of the device in Hz.
 
-  spi-cs-setup-ns:
+  spi-cs-setup-delay-ns:
     description:
-      Delay in nanosecods to be introduced by the controller after CS is
+      Delay in nanoseconds to be introduced by the controller after CS is
       asserted.
 
   spi-rx-bus-width:

drivers/spi/spi-cadence-xspi.c

@@ -177,7 +177,10 @@
 #define CDNS_XSPI_CMD_FLD_DSEQ_CMD_3(op) ( \
 	FIELD_PREP(CDNS_XSPI_CMD_DSEQ_R3_DCNT_H, \
 		((op)->data.nbytes >> 16) & 0xffff) | \
-	FIELD_PREP(CDNS_XSPI_CMD_DSEQ_R3_NUM_OF_DUMMY, (op)->dummy.nbytes * 8))
+	FIELD_PREP(CDNS_XSPI_CMD_DSEQ_R3_NUM_OF_DUMMY, \
+		  (op)->dummy.buswidth != 0 ? \
+		  (((op)->dummy.nbytes * 8) / (op)->dummy.buswidth) : \
+		  0))
 
 #define CDNS_XSPI_CMD_FLD_DSEQ_CMD_4(op, chipsel) ( \
 	FIELD_PREP(CDNS_XSPI_CMD_DSEQ_R4_BANK, chipsel) | \

drivers/spi/spi-mt65xx.c

@@ -1253,6 +1253,11 @@ static int mtk_spi_probe(struct platform_device *pdev)
 		dev_notice(dev, "SPI dma_set_mask(%d) failed, ret:%d\n",
 			   addr_bits, ret);
 
+	ret = devm_request_irq(dev, irq, mtk_spi_interrupt,
+			       IRQF_TRIGGER_NONE, dev_name(dev), master);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to register irq\n");
+
 	pm_runtime_enable(dev);
 
 	ret = devm_spi_register_master(dev, master);
@@ -1261,13 +1266,6 @@ static int mtk_spi_probe(struct platform_device *pdev)
 		return dev_err_probe(dev, ret, "failed to register master\n");
 	}
 
-	ret = devm_request_irq(dev, irq, mtk_spi_interrupt,
-			       IRQF_TRIGGER_NONE, dev_name(dev), master);
-	if (ret) {
-		pm_runtime_disable(dev);
-		return dev_err_probe(dev, ret, "failed to register irq\n");
-	}
-
 	return 0;
 }
 

drivers/spi/spi.c

@@ -2310,7 +2310,7 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
 	if (!of_property_read_u32(nc, "spi-max-frequency", &value))
 		spi->max_speed_hz = value;
 
-	if (!of_property_read_u16(nc, "spi-cs-setup-ns", &cs_setup)) {
+	if (!of_property_read_u16(nc, "spi-cs-setup-delay-ns", &cs_setup)) {
 		spi->cs_setup.value = cs_setup;
 		spi->cs_setup.unit = SPI_DELAY_UNIT_NSECS;
 	}

drivers/spi/spidev.c

@@ -68,7 +68,7 @@ static_assert(N_SPI_MINORS > 0 && N_SPI_MINORS <= 256);
 
 struct spidev_data {
 	dev_t			devt;
-	spinlock_t		spi_lock;
+	struct mutex		spi_lock;
 	struct spi_device	*spi;
 	struct list_head	device_entry;
 
@@ -95,9 +95,8 @@ spidev_sync(struct spidev_data *spidev, struct spi_message *message)
 	int status;
 	struct spi_device *spi;
 
-	spin_lock_irq(&spidev->spi_lock);
+	mutex_lock(&spidev->spi_lock);
 	spi = spidev->spi;
-	spin_unlock_irq(&spidev->spi_lock);
 
 	if (spi == NULL)
 		status = -ESHUTDOWN;
@@ -107,6 +106,7 @@ spidev_sync(struct spidev_data *spidev, struct spi_message *message)
 	if (status == 0)
 		status = message->actual_length;
 
+	mutex_unlock(&spidev->spi_lock);
 	return status;
 }
 
@@ -359,12 +359,12 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 	 * we issue this ioctl.
 	 */
 	spidev = filp->private_data;
-	spin_lock_irq(&spidev->spi_lock);
+	mutex_lock(&spidev->spi_lock);
 	spi = spi_dev_get(spidev->spi);
-	spin_unlock_irq(&spidev->spi_lock);
-
-	if (spi == NULL)
+	if (spi == NULL) {
+		mutex_unlock(&spidev->spi_lock);
 		return -ESHUTDOWN;
+	}
 
 	/* use the buffer lock here for triple duty:
 	 *  - prevent I/O (from us) so calling spi_setup() is safe;
@@ -508,6 +508,7 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 
 	mutex_unlock(&spidev->buf_lock);
 	spi_dev_put(spi);
+	mutex_unlock(&spidev->spi_lock);
 	return retval;
 }
 
@@ -529,12 +530,12 @@ spidev_compat_ioc_message(struct file *filp, unsigned int cmd,
 	 * we issue this ioctl.
 	 */
 	spidev = filp->private_data;
-	spin_lock_irq(&spidev->spi_lock);
+	mutex_lock(&spidev->spi_lock);
 	spi = spi_dev_get(spidev->spi);
-	spin_unlock_irq(&spidev->spi_lock);
-
-	if (spi == NULL)
+	if (spi == NULL) {
+		mutex_unlock(&spidev->spi_lock);
 		return -ESHUTDOWN;
+	}
 
 	/* SPI_IOC_MESSAGE needs the buffer locked "normally" */
 	mutex_lock(&spidev->buf_lock);
@@ -561,6 +562,7 @@ spidev_compat_ioc_message(struct file *filp, unsigned int cmd,
 done:
 	mutex_unlock(&spidev->buf_lock);
 	spi_dev_put(spi);
+	mutex_unlock(&spidev->spi_lock);
 	return retval;
 }
 
@@ -601,7 +603,6 @@ static int spidev_open(struct inode *inode, struct file *filp)
 	if (!spidev->tx_buffer) {
 		spidev->tx_buffer = kmalloc(bufsiz, GFP_KERNEL);
 		if (!spidev->tx_buffer) {
-			dev_dbg(&spidev->spi->dev, "open/ENOMEM\n");
 			status = -ENOMEM;
 			goto err_find_dev;
 		}
@@ -610,7 +611,6 @@ static int spidev_open(struct inode *inode, struct file *filp)
 	if (!spidev->rx_buffer) {
 		spidev->rx_buffer = kmalloc(bufsiz, GFP_KERNEL);
 		if (!spidev->rx_buffer) {
-			dev_dbg(&spidev->spi->dev, "open/ENOMEM\n");
 			status = -ENOMEM;
 			goto err_alloc_rx_buf;
 		}
@@ -640,10 +640,10 @@ static int spidev_release(struct inode *inode, struct file *filp)
 	spidev = filp->private_data;
 	filp->private_data = NULL;
 
-	spin_lock_irq(&spidev->spi_lock);
+	mutex_lock(&spidev->spi_lock);
 	/* ... after we unbound from the underlying device? */
 	dofree = (spidev->spi == NULL);
-	spin_unlock_irq(&spidev->spi_lock);
+	mutex_unlock(&spidev->spi_lock);
 
 	/* last close? */
 	spidev->users--;
@@ -776,7 +776,7 @@ static int spidev_probe(struct spi_device *spi)
 
 	/* Initialize the driver data */
 	spidev->spi = spi;
-	spin_lock_init(&spidev->spi_lock);
+	mutex_init(&spidev->spi_lock);
 	mutex_init(&spidev->buf_lock);
 
 	INIT_LIST_HEAD(&spidev->device_entry);
@@ -821,9 +821,9 @@ static void spidev_remove(struct spi_device *spi)
 	/* prevent new opens */
 	mutex_lock(&device_list_lock);
 	/* make sure ops on existing fds can abort cleanly */
-	spin_lock_irq(&spidev->spi_lock);
+	mutex_lock(&spidev->spi_lock);
 	spidev->spi = NULL;
-	spin_unlock_irq(&spidev->spi_lock);
+	mutex_unlock(&spidev->spi_lock);
 
 	list_del(&spidev->device_entry);
 	device_destroy(spidev_class, spidev->devt);