Commit c7c06d8a authored by Michael Hennerich's avatar Michael Hennerich Committed by Richard Purdie

backlight: adp8860: add support for ADP8861 & ADP8863

Signed-off-by: default avatarMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
Signed-off-by: default avatarRichard Purdie <rpurdie@linux.intel.com>
parent ed601fa4
......@@ -275,13 +275,13 @@ config BACKLIGHT_ADP5520
be called adp5520_bl.
config BACKLIGHT_ADP8860
tristate "Backlight Driver for ADP8860 using WLED"
tristate "Backlight Driver for ADP8860/ADP8861/ADP8863 using WLED"
depends on BACKLIGHT_CLASS_DEVICE && I2C
select NEW_LEDS
select LEDS_CLASS
help
If you have a LCD backlight connected to the ADP8860,
say Y here to enable this driver.
If you have a LCD backlight connected to the ADP8860, ADP8861 or
ADP8863 say Y here to enable this driver.
To compile this driver as a module, choose M here: the module will
be called adp8860_bl.
......
......@@ -62,7 +62,9 @@
#define ADP8860_PH2LEVH 0x24 /* Second phototransistor ambient light level-high byte register */
#define ADP8860_MANUFID 0x0 /* Analog Devices ADP8860 Manufacturer ID */
#define ADP8860_DEVICEID 0x7 /* Analog Devices ADP8860 Device ID */
#define ADP8861_MANUFID 0x4 /* Analog Devices ADP8861 Manufacturer ID */
#define ADP8863_MANUFID 0x2 /* Analog Devices ADP8863 Manufacturer ID */
#define ADP8860_DEVID(x) ((x) & 0xF)
#define ADP8860_MANID(x) ((x) >> 4)
......@@ -70,6 +72,7 @@
#define INT_CFG (1 << 6)
#define NSTBY (1 << 5)
#define DIM_EN (1 << 4)
#define GDWN_DIS (1 << 3)
#define SIS_EN (1 << 2)
#define CMP_AUTOEN (1 << 1)
#define BLEN (1 << 0)
......@@ -86,6 +89,12 @@
#define BL_CFGR_VAL(law, blv) ((((blv) & CFGR_BLV_MASK) << CFGR_BLV_SHIFT) | ((0x3 & (law)) << 1))
#define ALS_CCFG_VAL(filt) ((0x7 & filt) << 5)
enum {
adp8860,
adp8861,
adp8863
};
struct adp8860_led {
struct led_classdev cdev;
struct work_struct work;
......@@ -105,6 +114,8 @@ struct adp8860_bl {
int id;
int revid;
int current_brightness;
unsigned en_ambl_sens:1;
unsigned gdwn_dis:1;
};
static int adp8860_read(struct i2c_client *client, int reg, uint8_t *val)
......@@ -121,7 +132,6 @@ static int adp8860_read(struct i2c_client *client, int reg, uint8_t *val)
return 0;
}
static int adp8860_write(struct i2c_client *client, u8 reg, u8 val)
{
return i2c_smbus_write_byte_data(client, reg, val);
......@@ -321,7 +331,7 @@ static int adp8860_bl_set(struct backlight_device *bl, int brightness)
struct i2c_client *client = data->client;
int ret = 0;
if (data->pdata->en_ambl_sens) {
if (data->en_ambl_sens) {
if ((brightness > 0) && (brightness < ADP8860_MAX_BRIGHTNESS)) {
/* Disable Ambient Light auto adjust */
ret |= adp8860_clr_bits(client, ADP8860_MDCR,
......@@ -388,7 +398,7 @@ static int adp8860_bl_setup(struct backlight_device *bl)
ret |= adp8860_write(client, ADP8860_BLMX1, pdata->l1_daylight_max);
ret |= adp8860_write(client, ADP8860_BLDM1, pdata->l1_daylight_dim);
if (pdata->en_ambl_sens) {
if (data->en_ambl_sens) {
data->cached_daylight_max = pdata->l1_daylight_max;
ret |= adp8860_write(client, ADP8860_BLMX2,
pdata->l2_office_max);
......@@ -413,7 +423,8 @@ static int adp8860_bl_setup(struct backlight_device *bl)
ret |= adp8860_write(client, ADP8860_BLFR, FADE_VAL(pdata->bl_fade_in,
pdata->bl_fade_out));
ret |= adp8860_set_bits(client, ADP8860_MDCR, BLEN | DIM_EN | NSTBY);
ret |= adp8860_set_bits(client, ADP8860_MDCR, BLEN | DIM_EN | NSTBY |
(data->gdwn_dis ? GDWN_DIS : 0));
return ret;
}
......@@ -663,19 +674,29 @@ static int __devinit adp8860_probe(struct i2c_client *client,
return -EINVAL;
}
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (data == NULL)
return -ENOMEM;
ret = adp8860_read(client, ADP8860_MFDVID, &reg_val);
if (ret < 0)
return -EIO;
goto out2;
if (ADP8860_MANID(reg_val) != ADP8860_MANUFID) {
switch (ADP8860_MANID(reg_val)) {
case ADP8863_MANUFID:
data->gdwn_dis = !!pdata->gdwn_dis;
case ADP8860_MANUFID:
data->en_ambl_sens = !!pdata->en_ambl_sens;
break;
case ADP8861_MANUFID:
data->gdwn_dis = !!pdata->gdwn_dis;
break;
default:
dev_err(&client->dev, "failed to probe\n");
return -ENODEV;
ret = -ENODEV;
goto out2;
}
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (data == NULL)
return -ENOMEM;
/* It's confirmed that the DEVID field is actually a REVID */
data->revid = ADP8860_DEVID(reg_val);
......@@ -703,7 +724,7 @@ static int __devinit adp8860_probe(struct i2c_client *client,
data->bl = bl;
if (pdata->en_ambl_sens)
if (data->en_ambl_sens)
ret = sysfs_create_group(&bl->dev.kobj,
&adp8860_bl_attr_group);
......@@ -720,7 +741,8 @@ static int __devinit adp8860_probe(struct i2c_client *client,
backlight_update_status(bl);
dev_info(&client->dev, "Rev.%d Backlight\n", data->revid);
dev_info(&client->dev, "%s Rev.%d Backlight\n",
client->name, data->revid);
if (pdata->num_leds)
adp8860_led_probe(client);
......@@ -728,7 +750,7 @@ static int __devinit adp8860_probe(struct i2c_client *client,
return 0;
out:
if (data->pdata->en_ambl_sens)
if (data->en_ambl_sens)
sysfs_remove_group(&data->bl->dev.kobj,
&adp8860_bl_attr_group);
out1:
......@@ -749,7 +771,7 @@ static int __devexit adp8860_remove(struct i2c_client *client)
if (data->led)
adp8860_led_remove(client);
if (data->pdata->en_ambl_sens)
if (data->en_ambl_sens)
sysfs_remove_group(&data->bl->dev.kobj,
&adp8860_bl_attr_group);
......@@ -780,7 +802,9 @@ static int adp8860_i2c_resume(struct i2c_client *client)
#endif
static const struct i2c_device_id adp8860_id[] = {
{ "adp8860", 0 },
{ "adp8860", adp8860 },
{ "adp8861", adp8861 },
{ "adp8863", adp8863 },
{ }
};
MODULE_DEVICE_TABLE(i2c, adp8860_id);
......
......@@ -132,6 +132,23 @@ struct adp8860_backlight_platform_data {
u8 led_fade_out; /* LED Fade-Out Timer */
u8 led_fade_law; /* fade-on/fade-off transfer characteristic */
u8 led_on_time;
/**
* Gain down disable. Setting this option does not allow the
* charge pump to switch to lower gains. NOT AVAILABLE on ADP8860
* 1 = the charge pump doesn't switch down in gain until all LEDs are 0.
* The charge pump switches up in gain as needed. This feature is
* useful if the ADP8863 charge pump is used to drive an external load.
* This feature must be used when utilizing small fly capacitors
* (0402 or smaller).
* 0 = the charge pump automatically switches up and down in gain.
* This provides optimal efficiency, but is not suitable for driving
* loads that are not connected through the ADP8863 diode drivers.
* Additionally, the charge pump fly capacitors should be low ESR
* and sized 0603 or greater.
*/
u8 gdwn_dis;
};
#endif /* __LINUX_I2C_ADP8860_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment