Commit c7eec380 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'rproc-v4.6' of git://github.com/andersson/remoteproc

Pull remoteproc updates from Bjorn Andersson:
 "New driver for controlling ST's remote processors and a couple of
  minor fixes.  Also includes the addition of myself as co-maintainer"
Acked-by: default avatarOhad Ben-Cohen <ohad@wizery.com>

* tag 'rproc-v4.6' of git://github.com/andersson/remoteproc:
  MAINTAINERS: Add co-maintainer for remoteproc subsystems
  remoteproc: Supply controller driver for ST's Remote Processors
  remoteproc: debugfs: Add ability to boot remote processor using debugfs
  remoteproc: dt: Provide bindings for ST's Remote Processor Controller driver
  remoteproc: debugfs: Return error on invalid 'count' value
  remoteproc/wkup_m3: Use MODULE_DEVICE_TABLE to export alias
  remoteproc: report error if resource table doesn't exist
parents 37aa7319 69ae9895
STMicroelectronics Co-Processor Bindings
----------------------------------------
This binding provides support for adjunct processors found on ST SoCs.
Co-processors can be controlled from the bootloader or the primary OS. If
the bootloader starts a co-processor, the primary OS must detect its state
and act accordingly.
Required properties:
- compatible Should be one of:
"st,st231-rproc"
"st,st40-rproc"
- memory-region Reserved memory (See: ../reserved-memory/reserved-memory.txt)
- resets Reset lines (See: ../reset/reset.txt)
- reset-names Must be "sw_reset" and "pwr_reset"
- clocks Clock for co-processor (See: ../clock/clock-bindings.txt)
- clock-frequency Clock frequency to set co-processor at if the bootloader
hasn't already done so
- st,syscfg System configuration register which holds the boot vector
for the co-processor
1st cell: Phandle to syscon block
2nd cell: Boot vector register offset
Example:
audio_reserved: rproc@42000000 {
compatible = "shared-dma-pool";
reg = <0x42000000 0x01000000>;
no-map;
};
st231-audio {
compatible = "st,st231-rproc";
memory-region = <&audio_reserved>;
resets = <&softreset STIH407_ST231_AUD_SOFTRESET>;
reset-names = "sw_reset";
clocks = <&clk_s_c0_flexgen CLK_ST231_AUD_0>;
clock-frequency = <600000000>;
st,syscfg = <&syscfg_core 0x228>;
};
...@@ -4979,6 +4979,7 @@ F: include/linux/hw_random.h ...@@ -4979,6 +4979,7 @@ F: include/linux/hw_random.h
HARDWARE SPINLOCK CORE HARDWARE SPINLOCK CORE
M: Ohad Ben-Cohen <ohad@wizery.com> M: Ohad Ben-Cohen <ohad@wizery.com>
M: Bjorn Andersson <bjorn.andersson@linaro.org>
S: Maintained S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock.git
F: Documentation/hwspinlock.txt F: Documentation/hwspinlock.txt
...@@ -9169,6 +9170,7 @@ F: include/linux/regmap.h ...@@ -9169,6 +9170,7 @@ F: include/linux/regmap.h
REMOTE PROCESSOR (REMOTEPROC) SUBSYSTEM REMOTE PROCESSOR (REMOTEPROC) SUBSYSTEM
M: Ohad Ben-Cohen <ohad@wizery.com> M: Ohad Ben-Cohen <ohad@wizery.com>
M: Bjorn Andersson <bjorn.andersson@linaro.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc.git
S: Maintained S: Maintained
F: drivers/remoteproc/ F: drivers/remoteproc/
...@@ -9177,6 +9179,7 @@ F: include/linux/remoteproc.h ...@@ -9177,6 +9179,7 @@ F: include/linux/remoteproc.h
REMOTE PROCESSOR MESSAGING (RPMSG) SUBSYSTEM REMOTE PROCESSOR MESSAGING (RPMSG) SUBSYSTEM
M: Ohad Ben-Cohen <ohad@wizery.com> M: Ohad Ben-Cohen <ohad@wizery.com>
M: Bjorn Andersson <bjorn.andersson@linaro.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsg.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsg.git
S: Maintained S: Maintained
F: drivers/rpmsg/ F: drivers/rpmsg/
......
...@@ -77,4 +77,13 @@ config DA8XX_REMOTEPROC ...@@ -77,4 +77,13 @@ config DA8XX_REMOTEPROC
It's safe to say n here if you're not interested in multimedia It's safe to say n here if you're not interested in multimedia
offloading. offloading.
config ST_REMOTEPROC
tristate "ST remoteproc support"
depends on ARCH_STI
select REMOTEPROC
help
Say y here to support ST's adjunct processors via the remote
processor framework.
This can be either built-in or a loadable module.
endmenu endmenu
...@@ -11,3 +11,4 @@ obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o ...@@ -11,3 +11,4 @@ obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o
obj-$(CONFIG_STE_MODEM_RPROC) += ste_modem_rproc.o obj-$(CONFIG_STE_MODEM_RPROC) += ste_modem_rproc.o
obj-$(CONFIG_WKUP_M3_RPROC) += wkup_m3_rproc.o obj-$(CONFIG_WKUP_M3_RPROC) += wkup_m3_rproc.o
obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o
obj-$(CONFIG_ST_REMOTEPROC) += st_remoteproc.o
...@@ -823,8 +823,10 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw) ...@@ -823,8 +823,10 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
/* look for the resource table */ /* look for the resource table */
table = rproc_find_rsc_table(rproc, fw, &tablesz); table = rproc_find_rsc_table(rproc, fw, &tablesz);
if (!table) if (!table) {
dev_err(dev, "Failed to find resource table\n");
goto clean_up; goto clean_up;
}
/* Verify that resource table in loaded fw is unchanged */ /* Verify that resource table in loaded fw is unchanged */
if (rproc->table_csum != crc32(0, table, tablesz)) { if (rproc->table_csum != crc32(0, table, tablesz)) {
......
...@@ -88,8 +88,42 @@ static ssize_t rproc_state_read(struct file *filp, char __user *userbuf, ...@@ -88,8 +88,42 @@ static ssize_t rproc_state_read(struct file *filp, char __user *userbuf,
return simple_read_from_buffer(userbuf, count, ppos, buf, i); return simple_read_from_buffer(userbuf, count, ppos, buf, i);
} }
static ssize_t rproc_state_write(struct file *filp, const char __user *userbuf,
size_t count, loff_t *ppos)
{
struct rproc *rproc = filp->private_data;
char buf[10];
int ret;
if (count > sizeof(buf) || count <= 0)
return -EINVAL;
ret = copy_from_user(buf, userbuf, count);
if (ret)
return -EFAULT;
if (buf[count - 1] == '\n')
buf[count - 1] = '\0';
if (!strncmp(buf, "start", count)) {
ret = rproc_boot(rproc);
if (ret) {
dev_err(&rproc->dev, "Boot failed: %d\n", ret);
return ret;
}
} else if (!strncmp(buf, "stop", count)) {
rproc_shutdown(rproc);
} else {
dev_err(&rproc->dev, "Unrecognised option: %s\n", buf);
return -EINVAL;
}
return count;
}
static const struct file_operations rproc_state_ops = { static const struct file_operations rproc_state_ops = {
.read = rproc_state_read, .read = rproc_state_read,
.write = rproc_state_write,
.open = simple_open, .open = simple_open,
.llseek = generic_file_llseek, .llseek = generic_file_llseek,
}; };
...@@ -157,7 +191,7 @@ rproc_recovery_write(struct file *filp, const char __user *user_buf, ...@@ -157,7 +191,7 @@ rproc_recovery_write(struct file *filp, const char __user *user_buf,
int ret; int ret;
if (count < 1 || count > sizeof(buf)) if (count < 1 || count > sizeof(buf))
return count; return -EINVAL;
ret = copy_from_user(buf, user_buf, count); ret = copy_from_user(buf, user_buf, count);
if (ret) if (ret)
......
/*
* ST's Remote Processor Control Driver
*
* Copyright (C) 2015 STMicroelectronics - All Rights Reserved
*
* Author: Ludovic Barre <ludovic.barre@st.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_reserved_mem.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/remoteproc.h>
#include <linux/reset.h>
struct st_rproc_config {
bool sw_reset;
bool pwr_reset;
unsigned long bootaddr_mask;
};
struct st_rproc {
struct st_rproc_config *config;
struct reset_control *sw_reset;
struct reset_control *pwr_reset;
struct clk *clk;
u32 clk_rate;
struct regmap *boot_base;
u32 boot_offset;
};
static int st_rproc_start(struct rproc *rproc)
{
struct st_rproc *ddata = rproc->priv;
int err;
regmap_update_bits(ddata->boot_base, ddata->boot_offset,
ddata->config->bootaddr_mask, rproc->bootaddr);
err = clk_enable(ddata->clk);
if (err) {
dev_err(&rproc->dev, "Failed to enable clock\n");
return err;
}
if (ddata->config->sw_reset) {
err = reset_control_deassert(ddata->sw_reset);
if (err) {
dev_err(&rproc->dev, "Failed to deassert S/W Reset\n");
goto sw_reset_fail;
}
}
if (ddata->config->pwr_reset) {
err = reset_control_deassert(ddata->pwr_reset);
if (err) {
dev_err(&rproc->dev, "Failed to deassert Power Reset\n");
goto pwr_reset_fail;
}
}
dev_info(&rproc->dev, "Started from 0x%x\n", rproc->bootaddr);
return 0;
pwr_reset_fail:
if (ddata->config->pwr_reset)
reset_control_assert(ddata->sw_reset);
sw_reset_fail:
clk_disable(ddata->clk);
return err;
}
static int st_rproc_stop(struct rproc *rproc)
{
struct st_rproc *ddata = rproc->priv;
int sw_err = 0, pwr_err = 0;
if (ddata->config->sw_reset) {
sw_err = reset_control_assert(ddata->sw_reset);
if (sw_err)
dev_err(&rproc->dev, "Failed to assert S/W Reset\n");
}
if (ddata->config->pwr_reset) {
pwr_err = reset_control_assert(ddata->pwr_reset);
if (pwr_err)
dev_err(&rproc->dev, "Failed to assert Power Reset\n");
}
clk_disable(ddata->clk);
return sw_err ?: pwr_err;
}
static struct rproc_ops st_rproc_ops = {
.start = st_rproc_start,
.stop = st_rproc_stop,
};
/*
* Fetch state of the processor: 0 is off, 1 is on.
*/
static int st_rproc_state(struct platform_device *pdev)
{
struct rproc *rproc = platform_get_drvdata(pdev);
struct st_rproc *ddata = rproc->priv;
int reset_sw = 0, reset_pwr = 0;
if (ddata->config->sw_reset)
reset_sw = reset_control_status(ddata->sw_reset);
if (ddata->config->pwr_reset)
reset_pwr = reset_control_status(ddata->pwr_reset);
if (reset_sw < 0 || reset_pwr < 0)
return -EINVAL;
return !reset_sw && !reset_pwr;
}
static const struct st_rproc_config st40_rproc_cfg = {
.sw_reset = true,
.pwr_reset = true,
.bootaddr_mask = GENMASK(28, 1),
};
static const struct st_rproc_config st231_rproc_cfg = {
.sw_reset = true,
.pwr_reset = false,
.bootaddr_mask = GENMASK(31, 6),
};
static const struct of_device_id st_rproc_match[] = {
{ .compatible = "st,st40-rproc", .data = &st40_rproc_cfg },
{ .compatible = "st,st231-rproc", .data = &st231_rproc_cfg },
{},
};
MODULE_DEVICE_TABLE(of, st_rproc_match);
static int st_rproc_parse_dt(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct rproc *rproc = platform_get_drvdata(pdev);
struct st_rproc *ddata = rproc->priv;
struct device_node *np = dev->of_node;
int err;
if (ddata->config->sw_reset) {
ddata->sw_reset = devm_reset_control_get(dev, "sw_reset");
if (IS_ERR(ddata->sw_reset)) {
dev_err(dev, "Failed to get S/W Reset\n");
return PTR_ERR(ddata->sw_reset);
}
}
if (ddata->config->pwr_reset) {
ddata->pwr_reset = devm_reset_control_get(dev, "pwr_reset");
if (IS_ERR(ddata->pwr_reset)) {
dev_err(dev, "Failed to get Power Reset\n");
return PTR_ERR(ddata->pwr_reset);
}
}
ddata->clk = devm_clk_get(dev, NULL);
if (IS_ERR(ddata->clk)) {
dev_err(dev, "Failed to get clock\n");
return PTR_ERR(ddata->clk);
}
err = of_property_read_u32(np, "clock-frequency", &ddata->clk_rate);
if (err) {
dev_err(dev, "failed to get clock frequency\n");
return err;
}
ddata->boot_base = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
if (!ddata->boot_base) {
dev_err(dev, "Boot base not found\n");
return -EINVAL;
}
err = of_property_read_u32_index(np, "st,syscfg", 1,
&ddata->boot_offset);
if (err) {
dev_err(dev, "Boot offset not found\n");
return -EINVAL;
}
err = of_reserved_mem_device_init(dev);
if (err) {
dev_err(dev, "Failed to obtain shared memory\n");
return err;
}
err = clk_prepare(ddata->clk);
if (err)
dev_err(dev, "failed to get clock\n");
return err;
}
static int st_rproc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
const struct of_device_id *match;
struct st_rproc *ddata;
struct device_node *np = dev->of_node;
struct rproc *rproc;
int enabled;
int ret;
match = of_match_device(st_rproc_match, dev);
if (!match || !match->data) {
dev_err(dev, "No device match found\n");
return -ENODEV;
}
rproc = rproc_alloc(dev, np->name, &st_rproc_ops, NULL, sizeof(*ddata));
if (!rproc)
return -ENOMEM;
rproc->has_iommu = false;
ddata = rproc->priv;
ddata->config = (struct st_rproc_config *)match->data;
platform_set_drvdata(pdev, rproc);
ret = st_rproc_parse_dt(pdev);
if (ret)
goto free_rproc;
enabled = st_rproc_state(pdev);
if (enabled < 0)
goto free_rproc;
if (enabled) {
atomic_inc(&rproc->power);
rproc->state = RPROC_RUNNING;
} else {
clk_set_rate(ddata->clk, ddata->clk_rate);
}
ret = rproc_add(rproc);
if (ret)
goto free_rproc;
return 0;
free_rproc:
rproc_put(rproc);
return ret;
}
static int st_rproc_remove(struct platform_device *pdev)
{
struct rproc *rproc = platform_get_drvdata(pdev);
struct st_rproc *ddata = rproc->priv;
rproc_del(rproc);
clk_disable_unprepare(ddata->clk);
of_reserved_mem_device_release(&pdev->dev);
rproc_put(rproc);
return 0;
}
static struct platform_driver st_rproc_driver = {
.probe = st_rproc_probe,
.remove = st_rproc_remove,
.driver = {
.name = "st-rproc",
.of_match_table = of_match_ptr(st_rproc_match),
},
};
module_platform_driver(st_rproc_driver);
MODULE_DESCRIPTION("ST Remote Processor Control Driver");
MODULE_AUTHOR("Ludovic Barre <ludovic.barre@st.com>");
MODULE_LICENSE("GPL v2");
...@@ -122,6 +122,7 @@ static const struct of_device_id wkup_m3_rproc_of_match[] = { ...@@ -122,6 +122,7 @@ static const struct of_device_id wkup_m3_rproc_of_match[] = {
{ .compatible = "ti,am4372-wkup-m3", }, { .compatible = "ti,am4372-wkup-m3", },
{}, {},
}; };
MODULE_DEVICE_TABLE(of, wkup_m3_rproc_of_match);
static int wkup_m3_rproc_probe(struct platform_device *pdev) static int wkup_m3_rproc_probe(struct platform_device *pdev)
{ {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment