ath11k: Clear auth flag only for actual association in security mode

AUTH flag is needed when peer assoc command is sent from host in
security mode for non-assoc cases. Firmware will handle AUTH flag
when client is associating as AUTH flag will be set after key exchange.
For internally provided peer assoc commands from host, there won't be
any key exchange, so AUTH flag is expected to be set in host.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1
Co-developed-by: Lavanya Suresh <lavaks@codeaurora.org>
Signed-off-by: Lavanya Suresh <lavaks@codeaurora.org>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1635177786-20854-1-git-send-email-quic_ramess@quicinc.com

drivers/net/wireless/ath/ath11k/mac.c

@@ -2495,6 +2495,7 @@ static void ath11k_bss_assoc(struct ieee80211_hw *hw,
 
 	rcu_read_unlock();
 
+	peer_arg.is_assoc = true;
 	ret = ath11k_wmi_send_peer_assoc_cmd(ar, &peer_arg);
 	if (ret) {
 		ath11k_warn(ar->ab, "failed to run peer assoc for %pM vdev %i: %d\n",
@@ -3772,6 +3773,7 @@ static int ath11k_station_assoc(struct ath11k *ar,
 
 	ath11k_peer_assoc_prepare(ar, vif, sta, &peer_arg, reassoc);
 
+	peer_arg.is_assoc = true;
 	ret = ath11k_wmi_send_peer_assoc_cmd(ar, &peer_arg);
 	if (ret) {
 		ath11k_warn(ar->ab, "failed to run peer assoc for STA %pM vdev %i: %d\n",
@@ -3983,6 +3985,7 @@ static void ath11k_sta_rc_update_wk(struct work_struct *wk)
 			ath11k_peer_assoc_prepare(ar, arvif->vif, sta,
 						  &peer_arg, true);
 
+			peer_arg.is_assoc = false;
 			err = ath11k_wmi_send_peer_assoc_cmd(ar, &peer_arg);
 			if (err)
 				ath11k_warn(ar->ab, "failed to run peer assoc for STA %pM vdev %i: %d\n",

drivers/net/wireless/ath/ath11k/wmi.c

@@ -1763,7 +1763,7 @@ ath11k_wmi_copy_peer_flags(struct wmi_peer_assoc_complete_cmd *cmd,
 		cmd->peer_flags |= WMI_PEER_AUTH;
 	if (param->need_ptk_4_way) {
 		cmd->peer_flags |= WMI_PEER_NEED_PTK_4_WAY;
-		if (!hw_crypto_disabled)
+		if (!hw_crypto_disabled && param->is_assoc)
 			cmd->peer_flags &= ~WMI_PEER_AUTH;
 	}
 	if (param->need_gtk_2_way)

drivers/net/wireless/ath/ath11k/wmi.h

@@ -3617,6 +3617,7 @@ struct peer_assoc_params {
 	u32 peer_he_tx_mcs_set[WMI_HOST_MAX_HE_RATE_SET];
 	bool twt_responder;
 	bool twt_requester;
+	bool is_assoc;
 	struct ath11k_ppe_threshold peer_ppet;
 };