ARM: at91: add RSTC (Reset Controller) dt support

Signed-off-by: default avatarJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: default avatarRob Herring <rob.herring@calxeda.com>
Acked-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
parent 21ea52aa
...@@ -30,3 +30,15 @@ One interrupt per TC channel in a TC block: ...@@ -30,3 +30,15 @@ One interrupt per TC channel in a TC block:
reg = <0xfffdc000 0x100>; reg = <0xfffdc000 0x100>;
interrupts = <26 4 27 4 28 4>; interrupts = <26 4 27 4 28 4>;
}; };
RSTC Reset Controller required properties:
- compatible: Should be "atmel,<chip>-rstc".
<chip> can be "at91sam9260" or "at91sam9g45"
- reg: Should contain registers location and length
Example:
rstc@fffffd00 {
compatible = "atmel,at91sam9260-rstc";
reg = <0xfffffd00 0x10>;
};
...@@ -64,6 +64,11 @@ pmc: pmc@fffffc00 { ...@@ -64,6 +64,11 @@ pmc: pmc@fffffc00 {
reg = <0xfffffc00 0x100>; reg = <0xfffffc00 0x100>;
}; };
rstc@fffffd00 {
compatible = "atmel,at91sam9260-rstc";
reg = <0xfffffd00 0x10>;
};
pit: timer@fffffd30 { pit: timer@fffffd30 {
compatible = "atmel,at91sam9260-pit"; compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>; reg = <0xfffffd30 0xf>;
......
...@@ -65,6 +65,11 @@ pmc: pmc@fffffc00 { ...@@ -65,6 +65,11 @@ pmc: pmc@fffffc00 {
reg = <0xfffffc00 0x100>; reg = <0xfffffc00 0x100>;
}; };
rstc@fffffd00 {
compatible = "atmel,at91sam9g45-rstc";
reg = <0xfffffd00 0x10>;
};
pit: timer@fffffd30 { pit: timer@fffffd30 {
compatible = "atmel,at91sam9260-pit"; compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>; reg = <0xfffffd30 0xf>;
......
...@@ -63,6 +63,11 @@ pmc: pmc@fffffc00 { ...@@ -63,6 +63,11 @@ pmc: pmc@fffffc00 {
reg = <0xfffffc00 0x100>; reg = <0xfffffc00 0x100>;
}; };
rstc@fffffe00 {
compatible = "atmel,at91sam9g45-rstc";
reg = <0xfffffe00 0x10>;
};
pit: timer@fffffe30 { pit: timer@fffffe30 {
compatible = "atmel,at91sam9260-pit"; compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe30 0xf>; reg = <0xfffffe30 0xf>;
......
...@@ -306,7 +306,6 @@ static void __init at91sam9x5_ioremap_registers(void) ...@@ -306,7 +306,6 @@ static void __init at91sam9x5_ioremap_registers(void)
void __init at91sam9x5_initialize(void) void __init at91sam9x5_initialize(void)
{ {
arm_pm_restart = at91sam9g45_restart;
at91_extern_irq = (1 << AT91SAM9X5_ID_IRQ0); at91_extern_irq = (1 << AT91SAM9X5_ID_IRQ0);
/* Register GPIO subsystem (using DT) */ /* Register GPIO subsystem (using DT) */
......
...@@ -287,8 +287,38 @@ void __init at91_ioremap_matrix(u32 base_addr) ...@@ -287,8 +287,38 @@ void __init at91_ioremap_matrix(u32 base_addr)
} }
#if defined(CONFIG_OF) #if defined(CONFIG_OF)
static struct of_device_id rstc_ids[] = {
{ .compatible = "atmel,at91sam9260-rstc", .data = at91sam9_alt_restart },
{ .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart },
{ /*sentinel*/ }
};
static void at91_dt_rstc(void)
{
struct device_node *np;
const struct of_device_id *of_id;
np = of_find_matching_node(NULL, rstc_ids);
if (!np)
panic("unable to find compatible rstc node in dtb\n");
at91_rstc_base = of_iomap(np, 0);
if (!at91_rstc_base)
panic("unable to map rstc cpu registers\n");
of_id = of_match_node(rstc_ids, np);
if (!of_id)
panic("AT91: rtsc no restart function availlable\n");
arm_pm_restart = of_id->data;
of_node_put(np);
}
void __init at91_dt_initialize(void) void __init at91_dt_initialize(void)
{ {
at91_dt_rstc();
/* temporary until have the ramc binding*/ /* temporary until have the ramc binding*/
at91_boot_soc.ioremap_registers(); at91_boot_soc.ioremap_registers();
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment