Commit c82965f9 authored by Chang S. Bae's avatar Chang S. Bae Committed by Thomas Gleixner

x86/entry/64: Handle FSGSBASE enabled paranoid entry/exit

Without FSGSBASE, user space cannot change GSBASE other than through a
PRCTL. The kernel enforces that the user space GSBASE value is postive as
negative values are used for detecting the kernel space GSBASE value in the
paranoid entry code.

If FSGSBASE is enabled, user space can set arbitrary GSBASE values without
kernel intervention, including negative ones, which breaks the paranoid
entry assumptions.

To avoid this, paranoid entry needs to unconditionally save the current
GSBASE value independent of the interrupted context, retrieve and write the
kernel GSBASE and unconditionally restore the saved value on exit. The
restore happens either in paranoid_exit or in the special exit path of the
NMI low level code.

All other entry code pathes which use unconditional SWAPGS are not affected
as they do not depend on the actual content.

[ tglx: Massaged changelogs and comments ]
Suggested-by: default avatarH. Peter Anvin <hpa@zytor.com>
Suggested-by: default avatarAndy Lutomirski <luto@kernel.org>
Suggested-by: default avatarThomas Gleixner <tglx@linutronix.de>
Signed-off-by: default avatarChang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1557309753-24073-13-git-send-email-chang.seok.bae@intel.com
Link: https://lkml.kernel.org/r/20200528201402.1708239-12-sashal@kernel.org
parent eaad9812
......@@ -342,6 +342,12 @@ For 32-bit we have the following conventions - kernel is built with
#endif
.endm
.macro SAVE_AND_SET_GSBASE scratch_reg:req save_reg:req
rdgsbase \save_reg
GET_PERCPU_BASE \scratch_reg
wrgsbase \scratch_reg
.endm
#else /* CONFIG_X86_64 */
# undef UNWIND_HINT_IRET_REGS
# define UNWIND_HINT_IRET_REGS
......
......@@ -38,6 +38,7 @@
#include <asm/frame.h>
#include <asm/trapnr.h>
#include <asm/nospec-branch.h>
#include <asm/fsgsbase.h>
#include <linux/err.h>
#include "calling.h"
......@@ -426,10 +427,7 @@ SYM_CODE_START(\asmsym)
testb $3, CS-ORIG_RAX(%rsp)
jnz .Lfrom_usermode_switch_stack_\@
/*
* paranoid_entry returns SWAPGS flag for paranoid_exit in EBX.
* EBX == 0 -> SWAPGS, EBX == 1 -> no SWAPGS
*/
/* paranoid_entry returns GS information for paranoid_exit in EBX. */
call paranoid_entry
UNWIND_HINT_REGS
......@@ -458,10 +456,7 @@ SYM_CODE_START(\asmsym)
UNWIND_HINT_IRET_REGS offset=8
ASM_CLAC
/*
* paranoid_entry returns SWAPGS flag for paranoid_exit in EBX.
* EBX == 0 -> SWAPGS, EBX == 1 -> no SWAPGS
*/
/* paranoid_entry returns GS information for paranoid_exit in EBX. */
call paranoid_entry
UNWIND_HINT_REGS
......@@ -798,9 +793,14 @@ SYM_CODE_END(xen_failsafe_callback)
#endif /* CONFIG_XEN_PV */
/*
* Save all registers in pt_regs, and switch gs if needed.
* Use slow, but surefire "are we in kernel?" check.
* Return: ebx=0: need swapgs on exit, ebx=1: otherwise
* Save all registers in pt_regs. Return GSBASE related information
* in EBX depending on the availability of the FSGSBASE instructions:
*
* FSGSBASE R/EBX
* N 0 -> SWAPGS on exit
* 1 -> no SWAPGS on exit
*
* Y GSBASE value at entry, must be restored in paranoid_exit
*/
SYM_CODE_START_LOCAL(paranoid_entry)
UNWIND_HINT_FUNC
......@@ -808,7 +808,6 @@ SYM_CODE_START_LOCAL(paranoid_entry)
PUSH_AND_CLEAR_REGS save_ret=1
ENCODE_FRAME_POINTER 8
1:
/*
* Always stash CR3 in %r14. This value will be restored,
* verbatim, at exit. Needed if paranoid_entry interrupted
......@@ -826,6 +825,28 @@ SYM_CODE_START_LOCAL(paranoid_entry)
*/
SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg=%rax save_reg=%r14
/*
* Handling GSBASE depends on the availability of FSGSBASE.
*
* Without FSGSBASE the kernel enforces that negative GSBASE
* values indicate kernel GSBASE. With FSGSBASE no assumptions
* can be made about the GSBASE value when entering from user
* space.
*/
ALTERNATIVE "jmp .Lparanoid_entry_checkgs", "", X86_FEATURE_FSGSBASE
/*
* Read the current GSBASE and store it in %rbx unconditionally,
* retrieve and set the current CPUs kernel GSBASE. The stored value
* has to be restored in paranoid_exit unconditionally.
*
* The MSR write ensures that no subsequent load is based on a
* mispredicted GSBASE. No extra FENCE required.
*/
SAVE_AND_SET_GSBASE scratch_reg=%rax save_reg=%rbx
ret
.Lparanoid_entry_checkgs:
/* EBX = 1 -> kernel GSBASE active, no restore required */
movl $1, %ebx
/*
......@@ -860,24 +881,45 @@ SYM_CODE_END(paranoid_entry)
*
* We may be returning to very strange contexts (e.g. very early
* in syscall entry), so checking for preemption here would
* be complicated. Fortunately, we there's no good reason
* to try to handle preemption here.
* be complicated. Fortunately, there's no good reason to try
* to handle preemption here.
*
* R/EBX contains the GSBASE related information depending on the
* availability of the FSGSBASE instructions:
*
* FSGSBASE R/EBX
* N 0 -> SWAPGS on exit
* 1 -> no SWAPGS on exit
*
* On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it)
* Y User space GSBASE, must be restored unconditionally
*/
SYM_CODE_START_LOCAL(paranoid_exit)
UNWIND_HINT_REGS
/* If EBX is 0, SWAPGS is required */
testl %ebx, %ebx
jnz .Lparanoid_exit_no_swapgs
/* Always restore stashed CR3 value (see paranoid_entry) */
RESTORE_CR3 scratch_reg=%rbx save_reg=%r14
/*
* The order of operations is important. RESTORE_CR3 requires
* kernel GSBASE.
*
* NB to anyone to try to optimize this code: this code does
* not execute at all for exceptions from user mode. Those
* exceptions go through error_exit instead.
*/
RESTORE_CR3 scratch_reg=%rax save_reg=%r14
/* Handle the three GSBASE cases */
ALTERNATIVE "jmp .Lparanoid_exit_checkgs", "", X86_FEATURE_FSGSBASE
/* With FSGSBASE enabled, unconditionally restore GSBASE */
wrgsbase %rbx
jmp restore_regs_and_return_to_kernel
.Lparanoid_exit_checkgs:
/* On non-FSGSBASE systems, conditionally do SWAPGS */
testl %ebx, %ebx
jnz restore_regs_and_return_to_kernel
/* We are returning to a context with user GSBASE */
SWAPGS_UNSAFE_STACK
jmp restore_regs_and_return_to_kernel
.Lparanoid_exit_no_swapgs:
/* Always restore stashed CR3 value (see paranoid_entry) */
RESTORE_CR3 scratch_reg=%rbx save_reg=%r14
jmp restore_regs_and_return_to_kernel
jmp restore_regs_and_return_to_kernel
SYM_CODE_END(paranoid_exit)
/*
......@@ -1282,10 +1324,27 @@ end_repeat_nmi:
/* Always restore stashed CR3 value (see paranoid_entry) */
RESTORE_CR3 scratch_reg=%r15 save_reg=%r14
testl %ebx, %ebx /* swapgs needed? */
/*
* The above invocation of paranoid_entry stored the GSBASE
* related information in R/EBX depending on the availability
* of FSGSBASE.
*
* If FSGSBASE is enabled, restore the saved GSBASE value
* unconditionally, otherwise take the conditional SWAPGS path.
*/
ALTERNATIVE "jmp nmi_no_fsgsbase", "", X86_FEATURE_FSGSBASE
wrgsbase %rbx
jmp nmi_restore
nmi_no_fsgsbase:
/* EBX == 0 -> invoke SWAPGS */
testl %ebx, %ebx
jnz nmi_restore
nmi_swapgs:
SWAPGS_UNSAFE_STACK
nmi_restore:
POP_REGS
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment