Commit c8c0ba4f authored by Vladimir Oltean's avatar Vladimir Oltean Committed by David S. Miller

net: dsa: felix: setup MMIO filtering rules for PTP when using tag_8021q

Since the tag_8021q tagger is software-defined, it has no means by
itself for retrieving hardware timestamps of PTP event messages.

Because we do want to support PTP on ocelot even with tag_8021q, we need
to use the CPU port module for that. The RX timestamp is present in the
Extraction Frame Header. And because we can't use NPI mode which redirects
the CPU queues to an "external CPU" (meaning the ARM CPU running Linux),
then we need to poll the CPU port module through the MMIO registers to
retrieve TX and RX timestamps.

Sadly, on NXP LS1028A, the Felix switch was integrated into the SoC
without wiring the extraction IRQ line to the ARM GIC. So, if we want to
be notified of any PTP packets received on the CPU port module, we have
a problem.

There is a possible workaround, which is to use the Ethernet CPU port as
a notification channel that packets are available on the CPU port module
as well. When a PTP packet is received by the DSA tagger (without timestamp,
of course), we go to the CPU extraction queues, poll for it there, then
we drop the original Ethernet packet and masquerade the packet retrieved
over MMIO (plus the timestamp) as the original when we inject it up the
stack.

Create a quirk in struct felix is selected by the Felix driver (but not
by Seville, since that doesn't support PTP at all). We want to do this
such that the workaround is minimally invasive for future switches that
don't require this workaround.

The only traffic for which we need timestamps is PTP traffic, so add a
redirection rule to the CPU port module for this. Currently we only have
the need for PTP over L2, so redirection rules for UDP ports 319 and 320
are TBD for now.

Note that for the workaround of matching of PTP-over-Ethernet-port with
PTP-over-MMIO queues to work properly, both channels need to be
absolutely lossless. There are two parts to achieving that:
- We keep flow control enabled on the tag_8021q CPU port
- We put the DSA master interface in promiscuous mode, so it will never
  drop a PTP frame (for the profiles we are interested in, these are
  sent to the multicast MAC addresses of 01-80-c2-00-00-0e and
  01-1b-19-00-00-00).
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 924ee317
......@@ -264,6 +264,120 @@ static void felix_8021q_cpu_port_deinit(struct ocelot *ocelot, int port)
ocelot_apply_bridge_fwd_mask(ocelot);
}
/* Set up a VCAP IS2 rule for delivering PTP frames to the CPU port module.
* If the quirk_no_xtr_irq is in place, then also copy those PTP frames to the
* tag_8021q CPU port.
*/
static int felix_setup_mmio_filtering(struct felix *felix)
{
unsigned long user_ports = 0, cpu_ports = 0;
struct ocelot_vcap_filter *redirect_rule;
struct ocelot_vcap_filter *tagging_rule;
struct ocelot *ocelot = &felix->ocelot;
struct dsa_switch *ds = felix->ds;
int port, ret;
tagging_rule = kzalloc(sizeof(struct ocelot_vcap_filter), GFP_KERNEL);
if (!tagging_rule)
return -ENOMEM;
redirect_rule = kzalloc(sizeof(struct ocelot_vcap_filter), GFP_KERNEL);
if (!redirect_rule) {
kfree(tagging_rule);
return -ENOMEM;
}
for (port = 0; port < ocelot->num_phys_ports; port++) {
if (dsa_is_user_port(ds, port))
user_ports |= BIT(port);
if (dsa_is_cpu_port(ds, port))
cpu_ports |= BIT(port);
}
tagging_rule->key_type = OCELOT_VCAP_KEY_ETYPE;
*(__be16 *)tagging_rule->key.etype.etype.value = htons(ETH_P_1588);
*(__be16 *)tagging_rule->key.etype.etype.mask = htons(0xffff);
tagging_rule->ingress_port_mask = user_ports;
tagging_rule->prio = 1;
tagging_rule->id.cookie = ocelot->num_phys_ports;
tagging_rule->id.tc_offload = false;
tagging_rule->block_id = VCAP_IS1;
tagging_rule->type = OCELOT_VCAP_FILTER_OFFLOAD;
tagging_rule->lookup = 0;
tagging_rule->action.pag_override_mask = 0xff;
tagging_rule->action.pag_val = ocelot->num_phys_ports;
ret = ocelot_vcap_filter_add(ocelot, tagging_rule, NULL);
if (ret) {
kfree(tagging_rule);
kfree(redirect_rule);
return ret;
}
redirect_rule->key_type = OCELOT_VCAP_KEY_ANY;
redirect_rule->ingress_port_mask = user_ports;
redirect_rule->pag = ocelot->num_phys_ports;
redirect_rule->prio = 1;
redirect_rule->id.cookie = ocelot->num_phys_ports;
redirect_rule->id.tc_offload = false;
redirect_rule->block_id = VCAP_IS2;
redirect_rule->type = OCELOT_VCAP_FILTER_OFFLOAD;
redirect_rule->lookup = 0;
redirect_rule->action.cpu_copy_ena = true;
if (felix->info->quirk_no_xtr_irq) {
/* Redirect to the tag_8021q CPU but also copy PTP packets to
* the CPU port module
*/
redirect_rule->action.mask_mode = OCELOT_MASK_MODE_REDIRECT;
redirect_rule->action.port_mask = cpu_ports;
} else {
/* Trap PTP packets only to the CPU port module (which is
* redirected to the NPI port)
*/
redirect_rule->action.mask_mode = OCELOT_MASK_MODE_PERMIT_DENY;
redirect_rule->action.port_mask = 0;
}
ret = ocelot_vcap_filter_add(ocelot, redirect_rule, NULL);
if (ret) {
ocelot_vcap_filter_del(ocelot, tagging_rule);
kfree(redirect_rule);
return ret;
}
return 0;
}
static int felix_teardown_mmio_filtering(struct felix *felix)
{
struct ocelot_vcap_filter *tagging_rule, *redirect_rule;
struct ocelot_vcap_block *block_vcap_is1;
struct ocelot_vcap_block *block_vcap_is2;
struct ocelot *ocelot = &felix->ocelot;
int err;
block_vcap_is1 = &ocelot->block[VCAP_IS1];
block_vcap_is2 = &ocelot->block[VCAP_IS2];
tagging_rule = ocelot_vcap_block_find_filter_by_id(block_vcap_is1,
ocelot->num_phys_ports,
false);
if (!tagging_rule)
return -ENOENT;
err = ocelot_vcap_filter_del(ocelot, tagging_rule);
if (err)
return err;
redirect_rule = ocelot_vcap_block_find_filter_by_id(block_vcap_is2,
ocelot->num_phys_ports,
false);
if (!redirect_rule)
return -ENOENT;
return ocelot_vcap_filter_del(ocelot, redirect_rule);
}
static int felix_setup_tag_8021q(struct dsa_switch *ds, int cpu)
{
struct ocelot *ocelot = ds->priv;
......@@ -292,9 +406,9 @@ static int felix_setup_tag_8021q(struct dsa_switch *ds, int cpu)
ANA_PORT_CPU_FWD_BPDU_CFG, port);
}
/* In tag_8021q mode, the CPU port module is unused. So we
* want to disable flooding of any kind to the CPU port module,
* since packets going there will end in a black hole.
/* In tag_8021q mode, the CPU port module is unused, except for PTP
* frames. So we want to disable flooding of any kind to the CPU port
* module, since packets going there will end in a black hole.
*/
cpu_flood = ANA_PGID_PGID_PGID(BIT(ocelot->num_phys_ports));
ocelot_rmw_rix(ocelot, 0, cpu_flood, ANA_PGID_PGID, PGID_UC);
......@@ -314,8 +428,14 @@ static int felix_setup_tag_8021q(struct dsa_switch *ds, int cpu)
if (err)
goto out_free_dsa_8021_ctx;
err = felix_setup_mmio_filtering(felix);
if (err)
goto out_teardown_dsa_8021q;
return 0;
out_teardown_dsa_8021q:
dsa_8021q_setup(felix->dsa_8021q_ctx, false);
out_free_dsa_8021_ctx:
kfree(felix->dsa_8021q_ctx);
return err;
......@@ -327,6 +447,11 @@ static void felix_teardown_tag_8021q(struct dsa_switch *ds, int cpu)
struct felix *felix = ocelot_to_felix(ocelot);
int err, port;
err = felix_teardown_mmio_filtering(felix);
if (err)
dev_err(ds->dev, "felix_teardown_mmio_filtering returned %d",
err);
err = dsa_8021q_setup(felix->dsa_8021q_ctx, false);
if (err)
dev_err(ds->dev, "dsa_8021q_setup returned %d", err);
......
......@@ -23,6 +23,19 @@ struct felix_info {
int switch_pci_bar;
int imdio_pci_bar;
const struct ptp_clock_info *ptp_caps;
/* Some Ocelot switches are integrated into the SoC without the
* extraction IRQ line connected to the ARM GIC. By enabling this
* workaround, the few packets that are delivered to the CPU port
* module (currently only PTP) are copied not only to the hardware CPU
* port module, but also to the 802.1Q Ethernet CPU port, and polling
* the extraction registers is triggered once the DSA tagger sees a PTP
* frame. The Ethernet frame is only used as a notification: it is
* dropped, and the original frame is extracted over MMIO and annotated
* with the RX timestamp.
*/
bool quirk_no_xtr_irq;
int (*mdio_bus_alloc)(struct ocelot *ocelot);
void (*mdio_bus_free)(struct ocelot *ocelot);
void (*phylink_validate)(struct ocelot *ocelot, int port,
......
......@@ -1354,6 +1354,7 @@ static const struct felix_info felix_info_vsc9959 = {
.num_tx_queues = OCELOT_NUM_TC,
.switch_pci_bar = 4,
.imdio_pci_bar = 0,
.quirk_no_xtr_irq = true,
.ptp_caps = &vsc9959_ptp_caps,
.mdio_bus_alloc = vsc9959_mdio_bus_alloc,
.mdio_bus_free = vsc9959_mdio_bus_free,
......
......@@ -60,6 +60,7 @@ static const struct dsa_device_ops ocelot_8021q_netdev_ops = {
.xmit = ocelot_xmit,
.rcv = ocelot_rcv,
.overhead = VLAN_HLEN,
.promisc_on_master = true,
};
MODULE_LICENSE("GPL v2");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment