Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Another bunch of fixes for I2C.

  Jean's i801 patch is a cleanup on top of Volker's i801 patch, but it
  will make dependency handling much easier if those two go together"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mxs: use MXS_DMA_CTRL_WAIT4END instead of DMA_CTRL_ACK
  i2c: mediatek: Send i2c master code at more than 1MHz
  i2c: mediatek: Fix generic definitions for bus frequency
  i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()
  i2c: i801: Simplify the suspend callback
  i2c: i801: Fix resume bug
  i2c: aspeed: Mask IRQ status to relevant bits

drivers/i2c/busses/i2c-aspeed.c

@@ -69,6 +69,7 @@
  * These share bit definitions, so use the same values for the enable &
  * status bits.
  */
+#define ASPEED_I2CD_INTR_RECV_MASK			0xf000ffff
 #define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT			BIT(14)
 #define ASPEED_I2CD_INTR_BUS_RECOVER_DONE		BIT(13)
 #define ASPEED_I2CD_INTR_SLAVE_MATCH			BIT(7)
@@ -604,6 +605,7 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
 	writel(irq_received & ~ASPEED_I2CD_INTR_RX_DONE,
 	       bus->base + ASPEED_I2C_INTR_STS_REG);
 	readl(bus->base + ASPEED_I2C_INTR_STS_REG);
+	irq_received &= ASPEED_I2CD_INTR_RECV_MASK;
 	irq_remaining = irq_received;
 
 #if IS_ENABLED(CONFIG_I2C_SLAVE)

drivers/i2c/busses/i2c-i801.c

@@ -1709,6 +1709,16 @@ static inline int i801_acpi_probe(struct i801_priv *priv) { return 0; }
 static inline void i801_acpi_remove(struct i801_priv *priv) { }
 #endif
 
+static unsigned char i801_setup_hstcfg(struct i801_priv *priv)
+{
+	unsigned char hstcfg = priv->original_hstcfg;
+
+	hstcfg &= ~SMBHSTCFG_I2C_EN;	/* SMBus timing */
+	hstcfg |= SMBHSTCFG_HST_EN;
+	pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hstcfg);
+	return hstcfg;
+}
+
 static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	unsigned char temp;
@@ -1830,14 +1840,10 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		return err;
 	}
 
-	pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &temp);
-	priv->original_hstcfg = temp;
-	temp &= ~SMBHSTCFG_I2C_EN;	/* SMBus timing */
-	if (!(temp & SMBHSTCFG_HST_EN)) {
+	pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &priv->original_hstcfg);
+	temp = i801_setup_hstcfg(priv);
+	if (!(priv->original_hstcfg & SMBHSTCFG_HST_EN))
 		dev_info(&dev->dev, "Enabling SMBus device\n");
-		temp |= SMBHSTCFG_HST_EN;
-	}
-	pci_write_config_byte(priv->pci_dev, SMBHSTCFG, temp);
 
 	if (temp & SMBHSTCFG_SMB_SMI_EN) {
 		dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
@@ -1952,10 +1958,9 @@ static void i801_shutdown(struct pci_dev *dev)
 #ifdef CONFIG_PM_SLEEP
 static int i801_suspend(struct device *dev)
 {
-	struct pci_dev *pci_dev = to_pci_dev(dev);
-	struct i801_priv *priv = pci_get_drvdata(pci_dev);
+	struct i801_priv *priv = dev_get_drvdata(dev);
 
-	pci_write_config_byte(pci_dev, SMBHSTCFG, priv->original_hstcfg);
+	pci_write_config_byte(priv->pci_dev, SMBHSTCFG, priv->original_hstcfg);
 	return 0;
 }
 
@@ -1963,6 +1968,7 @@ static int i801_resume(struct device *dev)
 {
 	struct i801_priv *priv = dev_get_drvdata(dev);
 
+	i801_setup_hstcfg(priv);
 	i801_enable_host_notify(&priv->adapter);
 
 	return 0;

drivers/i2c/busses/i2c-mt65xx.c

@@ -681,8 +681,8 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src,
 	unsigned int cnt_mul;
 	int ret = -EINVAL;
 
-	if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ)
-		target_speed = I2C_MAX_FAST_MODE_PLUS_FREQ;
+	if (target_speed > I2C_MAX_HIGH_SPEED_MODE_FREQ)
+		target_speed = I2C_MAX_HIGH_SPEED_MODE_FREQ;
 
 	max_step_cnt = mtk_i2c_max_step_cnt(target_speed);
 	base_step_cnt = max_step_cnt;
@@ -759,7 +759,7 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
 	for (clk_div = 1; clk_div <= max_clk_div; clk_div++) {
 		clk_src = parent_clk / clk_div;
 
-		if (target_speed > I2C_MAX_FAST_MODE_FREQ) {
+		if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ) {
 			/* Set master code speed register */
 			ret = mtk_i2c_calculate_speed(i2c, clk_src,
 						      I2C_MAX_FAST_MODE_FREQ,

drivers/i2c/busses/i2c-mxs.c

@@ -25,6 +25,7 @@
 #include <linux/of_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
+#include <linux/dma/mxs-dma.h>
 
 #define DRIVER_NAME "mxs-i2c"
 
@@ -200,7 +201,8 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
 		dma_map_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE);
 		desc = dmaengine_prep_slave_sg(i2c->dmach, &i2c->sg_io[0], 1,
 					DMA_MEM_TO_DEV,
-					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+					DMA_PREP_INTERRUPT |
+					MXS_DMA_CTRL_WAIT4END);
 		if (!desc) {
 			dev_err(i2c->dev,
 				"Failed to get DMA data write descriptor.\n");
@@ -228,7 +230,8 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
 		dma_map_sg(i2c->dev, &i2c->sg_io[1], 1, DMA_FROM_DEVICE);
 		desc = dmaengine_prep_slave_sg(i2c->dmach, &i2c->sg_io[1], 1,
 					DMA_DEV_TO_MEM,
-					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+					DMA_PREP_INTERRUPT |
+					MXS_DMA_CTRL_WAIT4END);
 		if (!desc) {
 			dev_err(i2c->dev,
 				"Failed to get DMA data write descriptor.\n");
@@ -260,7 +263,8 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
 		dma_map_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE);
 		desc = dmaengine_prep_slave_sg(i2c->dmach, i2c->sg_io, 2,
 					DMA_MEM_TO_DEV,
-					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+					DMA_PREP_INTERRUPT |
+					MXS_DMA_CTRL_WAIT4END);
 		if (!desc) {
 			dev_err(i2c->dev,
 				"Failed to get DMA data write descriptor.\n");

drivers/i2c/i2c-core-base.c

@@ -1464,8 +1464,8 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 
 	/* create pre-declared device nodes */
 	of_i2c_register_devices(adap);
-	i2c_acpi_register_devices(adap);
 	i2c_acpi_install_space_handler(adap);
+	i2c_acpi_register_devices(adap);
 
 	if (adap->nr < __i2c_first_dynamic_bus_num)
 		i2c_scan_static_board_info(adap);