Commit c91d0c2e authored by Artur Weber's avatar Artur Weber Committed by Mark Brown

ASoC: samsung: midas_wm1811: Add GPIO-based headset jack detection

Some Samsung devices that use the midas_wm1811 driver use a GPIO-based
method for detecting whether the headset jack is plugged in, as well as
detecting which headset buttons are pressed. There are two GPIOs:
a "headset detect" GPIO responsible for detecting jack insertion, and
a "headset key" GPIO which triggers when a button on the headset is
pressed. The plug type and the button pressed are determined based
on information from an ADC channel. The headset mic is enabled by a
headset mic bias regulator.

Add support for the GPIO-based headset jack detection mechanism,
and make it configurable from the device tree.

This implementation borrows somewhat from the aries_wm8994.c driver,
though there are a few changes to make the code cleaner, and to add
support for DT-based configuration.

Notably, a dependency on IIO is introduced, to accommodate the ADC
reading requirement.
Signed-off-by: default avatarArtur Weber <aweber.kernel@gmail.com>
Link: https://msgid.link/r/20240525-midas-wm1811-gpio-jack-v4-5-f488e03bd8c7@gmail.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 9da93d49
......@@ -140,7 +140,7 @@ config SND_SOC_SAMSUNG_ARIES_WM8994
config SND_SOC_SAMSUNG_MIDAS_WM1811
tristate "SoC I2S Audio support for Midas boards"
depends on SND_SOC_SAMSUNG
depends on SND_SOC_SAMSUNG && IIO
select SND_SAMSUNG_I2S
select SND_SOC_WM8994
help
......
......@@ -7,7 +7,9 @@
#include <linux/clk.h>
#include <linux/gpio/consumer.h>
#include <linux/iio/consumer.h>
#include <linux/mfd/wm8994/registers.h>
#include <linux/input-event-codes.h>
#include <linux/module.h>
#include <linux/of.h>
#include <sound/jack.h>
......@@ -28,6 +30,9 @@
struct midas_priv {
struct gpio_desc *gpio_fm_sel;
struct gpio_desc *gpio_lineout_sel;
struct gpio_desc *gpio_headset_detect;
struct gpio_desc *gpio_headset_key;
struct iio_channel *adc_headset_detect;
unsigned int fll1_rate;
struct snd_soc_jack headset_jack;
......@@ -44,6 +49,117 @@ static struct snd_soc_jack_pin headset_jack_pins[] = {
},
};
/*
* min_mv/max_mv values in this struct are set up based on DT values.
*/
static struct snd_soc_jack_zone headset_jack_zones[] = {
{ .jack_type = SND_JACK_HEADPHONE, },
{ .jack_type = SND_JACK_HEADSET, },
{ .jack_type = SND_JACK_HEADPHONE, },
};
/*
* This is used for manual detection in headset_key_check, we reuse the
* structure since it's convenient.
*
* min_mv/max_mv values in this struct are set up based on DT values.
*/
static struct snd_soc_jack_zone headset_key_zones[] = {
{ .jack_type = SND_JACK_BTN_0, }, /* Media */
{ .jack_type = SND_JACK_BTN_1, }, /* Volume Up */
{ .jack_type = SND_JACK_BTN_2, }, /* Volume Down */
};
static int headset_jack_check(void *data)
{
struct snd_soc_component *codec = data;
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(codec);
struct midas_priv *priv = snd_soc_card_get_drvdata(codec->card);
int adc, ret;
int jack_type = 0;
if (!gpiod_get_value_cansleep(priv->gpio_headset_detect))
return 0;
/* Enable headset mic bias regulator so that the ADC reading works */
ret = snd_soc_dapm_force_enable_pin(dapm, "headset-mic-bias");
if (ret < 0) {
pr_err("%s: Failed to enable headset mic bias regulator (%d), assuming headphones\n",
__func__, ret);
return SND_JACK_HEADPHONE;
}
snd_soc_dapm_sync(dapm);
/* Sleep for a small amount of time to get the value to stabilize */
msleep(20);
ret = iio_read_channel_processed(priv->adc_headset_detect, &adc);
if (ret) {
pr_err("%s: Failed to read ADC (%d), assuming headphones\n",
__func__, ret);
jack_type = SND_JACK_HEADPHONE;
goto out;
}
pr_debug("%s: ADC value is %d\n", __func__, adc);
jack_type = snd_soc_jack_get_type(&priv->headset_jack, adc);
out:
ret = snd_soc_dapm_disable_pin(dapm, "headset-mic-bias");
if (ret < 0)
pr_err("%s: Failed to disable headset mic bias regulator (%d)\n",
__func__, ret);
snd_soc_dapm_sync(dapm);
return jack_type;
}
static int headset_key_check(void *data)
{
struct snd_soc_component *codec = data;
struct midas_priv *priv = snd_soc_card_get_drvdata(codec->card);
int adc, i, ret;
if (!gpiod_get_value_cansleep(priv->gpio_headset_key))
return 0;
/* Filter out keypresses when 4 pole jack not detected */
if (!(priv->headset_jack.status & SND_JACK_MICROPHONE))
return 0;
ret = iio_read_channel_processed(priv->adc_headset_detect, &adc);
if (ret) {
pr_err("%s: Failed to read ADC (%d), can't detect key type\n",
__func__, ret);
return 0;
}
pr_debug("%s: ADC value is %d\n", __func__, adc);
for (i = 0; i < ARRAY_SIZE(headset_key_zones); i++) {
if (adc >= headset_key_zones[i].min_mv &&
adc <= headset_key_zones[i].max_mv) {
return headset_key_zones[i].jack_type;
}
}
return 0;
}
static struct snd_soc_jack_gpio headset_gpio[] = {
{
.name = "Headset Jack",
.report = SND_JACK_HEADSET,
.debounce_time = 150,
.jack_status_check = headset_jack_check,
},
{
.name = "Headset Key",
.report = SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2,
.debounce_time = 30,
.jack_status_check = headset_key_check,
},
};
static int midas_start_fll1(struct snd_soc_pcm_runtime *rtd, unsigned int rate)
{
struct snd_soc_card *card = rtd->card;
......@@ -291,18 +407,67 @@ static int midas_late_probe(struct snd_soc_card *card)
return ret;
}
ret = snd_soc_card_jack_new_pins(card, "Headset",
SND_JACK_HEADSET | SND_JACK_MECHANICAL |
SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2 |
SND_JACK_BTN_3 | SND_JACK_BTN_4 | SND_JACK_BTN_5,
&priv->headset_jack,
headset_jack_pins,
ARRAY_SIZE(headset_jack_pins));
if (ret)
if (!priv->gpio_headset_detect) {
ret = snd_soc_card_jack_new_pins(card, "Headset",
SND_JACK_HEADSET | SND_JACK_MECHANICAL |
SND_JACK_BTN_0 | SND_JACK_BTN_1 |
SND_JACK_BTN_2 | SND_JACK_BTN_3 |
SND_JACK_BTN_4 | SND_JACK_BTN_5,
&priv->headset_jack,
headset_jack_pins,
ARRAY_SIZE(headset_jack_pins));
if (ret)
return ret;
wm8958_mic_detect(aif1_dai->component, &priv->headset_jack,
NULL, NULL, NULL, NULL);
} else {
/* Some devices (n8000, t310) use a GPIO to detect the jack. */
ret = snd_soc_card_jack_new_pins(card, "Headset",
SND_JACK_HEADSET | SND_JACK_BTN_0 |
SND_JACK_BTN_1 | SND_JACK_BTN_2,
&priv->headset_jack,
headset_jack_pins,
ARRAY_SIZE(headset_jack_pins));
if (ret) {
dev_err(card->dev,
"Failed to set up headset pins: %d\n", ret);
return ret;
}
ret = snd_soc_jack_add_zones(&priv->headset_jack,
ARRAY_SIZE(headset_jack_zones),
headset_jack_zones);
if (ret) {
dev_err(card->dev,
"Failed to set up headset zones: %d\n", ret);
return ret;
}
headset_gpio[0].data = aif1_dai->component;
headset_gpio[0].desc = priv->gpio_headset_detect;
headset_gpio[1].data = aif1_dai->component;
headset_gpio[1].desc = priv->gpio_headset_key;
snd_jack_set_key(priv->headset_jack.jack,
SND_JACK_BTN_0, KEY_MEDIA);
snd_jack_set_key(priv->headset_jack.jack,
SND_JACK_BTN_1, KEY_VOLUMEUP);
snd_jack_set_key(priv->headset_jack.jack,
SND_JACK_BTN_2, KEY_VOLUMEDOWN);
ret = snd_soc_jack_add_gpios(&priv->headset_jack,
ARRAY_SIZE(headset_gpio),
headset_gpio);
if (ret)
dev_err(card->dev,
"Failed to set up headset jack GPIOs: %d\n",
ret);
return ret;
}
wm8958_mic_detect(aif1_dai->component, &priv->headset_jack,
NULL, NULL, NULL, NULL);
return 0;
}
......@@ -411,6 +576,9 @@ static int midas_probe(struct platform_device *pdev)
struct snd_soc_card *card = &midas_card;
struct device *dev = &pdev->dev;
static struct snd_soc_dai_link *dai_link;
enum iio_chan_type channel_type;
u32 fourpole_threshold[2];
u32 button_threshold[3];
struct midas_priv *priv;
int ret, i;
......@@ -434,6 +602,90 @@ static int midas_probe(struct platform_device *pdev)
return PTR_ERR(priv->gpio_lineout_sel);
}
priv->gpio_headset_detect = devm_gpiod_get_optional(dev,
"headset-detect", GPIOD_IN);
if (IS_ERR(priv->gpio_headset_detect))
return dev_err_probe(dev, PTR_ERR(priv->gpio_headset_detect),
"Failed to get headset jack detect GPIO\n");
if (priv->gpio_headset_detect) {
priv->adc_headset_detect = devm_iio_channel_get(dev,
"headset-detect");
if (IS_ERR(priv->adc_headset_detect))
return dev_err_probe(dev,
PTR_ERR(priv->adc_headset_detect),
"Failed to get ADC channel\n");
ret = iio_get_channel_type(priv->adc_headset_detect,
&channel_type);
if (ret) {
dev_err(dev, "Failed to get ADC channel type\n");
return ret;
}
if (channel_type != IIO_VOLTAGE) {
dev_err(dev, "ADC channel is not voltage\n");
return ret;
}
priv->gpio_headset_key = devm_gpiod_get(dev, "headset-key",
GPIOD_IN);
if (IS_ERR(priv->gpio_headset_key))
return dev_err_probe(dev,
PTR_ERR(priv->gpio_headset_key),
"Failed to get headset key GPIO\n");
ret = of_property_read_u32_array(dev->of_node,
"samsung,headset-4pole-threshold-microvolt",
fourpole_threshold,
ARRAY_SIZE(fourpole_threshold));
if (ret) {
dev_err(dev, "Failed to get 4-pole jack detection threshold\n");
return ret;
}
if (fourpole_threshold[0] > fourpole_threshold[1]) {
dev_err(dev, "Invalid 4-pole jack detection threshold value\n");
return -EINVAL;
}
headset_jack_zones[0].max_mv = (fourpole_threshold[0]);
headset_jack_zones[1].min_mv = (fourpole_threshold[0] + 1);
headset_jack_zones[1].max_mv = (fourpole_threshold[1]);
headset_jack_zones[2].min_mv = (fourpole_threshold[1] + 1);
ret = of_property_read_u32_array(dev->of_node,
"samsung,headset-button-threshold-microvolt",
button_threshold,
ARRAY_SIZE(button_threshold));
if (ret) {
dev_err(dev, "Failed to get headset button detection threshold\n");
return ret;
}
if (button_threshold[0] > button_threshold[1] ||
button_threshold[1] > button_threshold[2]) {
dev_err(dev, "Invalid headset button detection threshold value\n");
return -EINVAL;
}
for (i = 0; i < 3; i++) {
if (i != 0 && button_threshold[i] <= 0) {
dev_err(dev, "Invalid headset button detection threshold value\n");
return -EINVAL;
}
headset_key_zones[i].min_mv = button_threshold[i];
if (i == 2)
headset_key_zones[i].max_mv = UINT_MAX;
else
headset_key_zones[i].max_mv = \
(button_threshold[i+1] - 1);
}
}
ret = snd_soc_of_parse_card_name(card, "model");
if (ret < 0) {
dev_err(dev, "Card name is not specified\n");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment