Merge branch 'mvneta-hwbm'

Gregory CLEMENT says:

====================
API set for HW Buffer management

This is the sixth version of the API set for HW Buffer management (that was
initially submitted here:
http://thread.gmane.org/gmane.linux.kernel/2125152).

This version is just a rebasing onto the last net-next. I also added
the Tested-by flag from Sebastian Careba : "The patch set applies
successfully and it works well, no more Samba issues any longer".

For the record in the previous versions I made the following changes:
v4 -> v5:
- Add a field with the size of the buffer of the pool was added. It
  then allow to fix some misused size in the mvneta_bm code when using
  the new framework.

- Add a new patch from Marcin for sram allowing to require
  non-bufferable access to the memory. It was needed for the hardware
  buffer management of the mvneta.

- Fix the build issue notified by the 0-day builder when building the
  drivers as module.

v3 -> v4
- Fix build issue when HWBM is not selected

v2 -> v3
- Make a HWBM and a SWBM version of the mvneta_rx() function in order
  to reduce the the conditional code. Kept a condition inside the
  mvneta_poll because specializing this function would have means
  duplicating 95% of the code.

- Put back the register_netdev() call at the end of the mvneta_probe()
  function. In order to have a unique ID for each port, just used a
  global variable in the driver.

- Added a fix from Marcin in the "net: mvneta: bm: add support for
  hardware buffer management" patch: "when dropping packets, only
  buffer pointers passed from BM to descriptors have to be returned to
  the pool. In submitted version after closing the port and
  mvneta_rxq_deinit(), it was very likely that a lot of fake buffers
  are added to the pool, because all descriptors took part in
  iteration."

- Removed the select MVNETA_BM from the Kconfig, it will let the user
  the choice to use not use it if they want.

v1 -> v2
- The hardware buffer management helpers are no more built by default
  and now depend on a hidden config symbol which has to be selected
  by the driver if needed
- The hwbm_pool_refill() and hwbm_pool_add() now receive a gfp_t as
  argument allowing the caller to specify the flag it needs.
- buf_num is now tested to ensure there is no wrapping
- A spinlock has been added to protect the hwbm_pool_add() function in
  SMP or irq context.
- used pr_warn instead of pr_debug in case of errors.
- fixed the mvneta implementation by returning the buffer to the pool
  at various place instead of ignoring it.
- Squashed "bus: mvenus-mbus: Fix size test for
   mvebu_mbus_get_dram_win_info" into bus: mvebu-mbus: provide api for
   obtaining IO and DRAM window information.
- Added my signed-otf-by on all the patches as submitter of the series.
- Renamed the dts patches with the pattern "ARM: dts: platform:"
- Removed the patch "ARM: mvebu: enable SRAM support in
  mvebu_v7_defconfig" of this series and already applied it
- Modified the order of the patches.

In order to ease the test the branch mvneta-BM-framework-v6 is
available at git@github.com:MISL-EBU-System-SW/mainline-public.git.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt

@@ -18,15 +18,30 @@ Optional properties:
   "core" for core clock and "bus" for the optional bus clock.
 
 
+Optional properties (valid only for Armada XP/38x):
+
+- buffer-manager: a phandle to a buffer manager node. Please refer to
+  Documentation/devicetree/bindings/net/marvell-neta-bm.txt
+- bm,pool-long: ID of a pool, that will accept all packets of a size
+  higher than 'short' pool's threshold (if set) and up to MTU value.
+  Obligatory, when the port is supposed to use hardware
+  buffer management.
+- bm,pool-short: ID of a pool, that will be used for accepting
+  packets of a size lower than given threshold. If not set, the port
+  will use a single 'long' pool for all packets, as defined above.
+
 Example:
 
-ethernet@d0070000 {
+ethernet@70000 {
 	compatible = "marvell,armada-370-neta";
-	reg = <0xd0070000 0x2500>;
+	reg = <0x70000 0x2500>;
 	interrupts = <8>;
 	clocks = <&gate_clk 4>;
 	tx-csum-limit = <9800>
 	status = "okay";
 	phy = <&phy0>;
 	phy-mode = "rgmii-id";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
 };

Documentation/devicetree/bindings/net/marvell-neta-bm.txt

+* Marvell Armada 380/XP Buffer Manager driver (BM)
+
+Required properties:
+
+- compatible: should be "marvell,armada-380-neta-bm".
+- reg: address and length of the register set for the device.
+- clocks: a pointer to the reference clock for this device.
+- internal-mem: a phandle to BM internal SRAM definition.
+
+Optional properties (port):
+
+- pool<0 : 3>,capacity: size of external buffer pointers' ring maintained
+  in DRAM. Can be set for each pool (id 0 : 3) separately. The value has
+  to be chosen between 128 and 16352 and it also has to be aligned to 32.
+  Otherwise the driver would adjust a given number or choose default if
+  not set.
+- pool<0 : 3>,pkt-size: maximum size of a packet accepted by a given buffer
+  pointers' pool (id 0 : 3). It will be taken into consideration only when pool
+  type is 'short'. For 'long' ones it would be overridden by port's MTU.
+  If not set a driver will choose a default value.
+
+In order to see how to hook the BM to a given ethernet port, please
+refer to Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt.
+
+Example:
+
+- main node:
+
+bm: bm@c8000 {
+	compatible = "marvell,armada-380-neta-bm";
+	reg = <0xc8000 0xac>;
+	clocks = <&gateclk 13>;
+	internal-mem = <&bm_bppi>;
+	status = "okay";
+	pool2,capacity = <4096>;
+	pool1,pkt-size = <512>;
+};
+
+- internal SRAM node:
+
+bm_bppi: bm-bppi {
+	compatible = "mmio-sram";
+	reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+	ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	clocks = <&gateclk 13>;
+	status = "okay";
+};

Documentation/devicetree/bindings/sram/sram.txt

@@ -25,6 +25,11 @@ Required properties in the sram node:
 - ranges : standard definition, should translate from local addresses
            within the sram to bus addresses
 
+Optional properties in the sram node:
+
+- no-memory-wc : the flag indicating, that SRAM memory region has not to
+                 be remapped as write combining. WC is used by default.
+
 Required properties in the area nodes:
 
 - reg : iomem address range, relative to the SRAM range

arch/arm/boot/dts/armada-385-db-ap.dts

@@ -61,7 +61,8 @@ soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
 			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
 			spi1: spi@10680 {
@@ -138,12 +139,18 @@ ethernet@30000 {
 				status = "okay";
 				phy = <&phy2>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
+				bm,pool-short = <3>;
 			};
 
 			ethernet@34000 {
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
 			};
 
 			ethernet@70000 {
@@ -157,6 +164,13 @@ ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <3>;
+			};
+
+			bm@c8000 {
+				status = "okay";
 			};
 
 			nfc: flash@d0000 {
@@ -178,6 +192,10 @@ usb3@f0000 {
 			};
 		};
 
+		bm-bppi {
+			status = "okay";
+		};
+
 		pcie-controller {
 			status = "okay";
 

arch/arm/boot/dts/armada-388-clearfog.dts

@@ -78,6 +78,9 @@ soc {
 		internal-regs {
 			ethernet@30000 {
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <1>;
 				status = "okay";
 
 				fixed-link {
@@ -88,6 +91,9 @@ fixed-link {
 
 			ethernet@34000 {
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
+				bm,pool-short = <1>;
 				status = "okay";
 
 				fixed-link {

arch/arm/boot/dts/armada-388-db.dts

@@ -66,7 +66,8 @@ soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
 			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
 			spi@10600 {
@@ -99,6 +100,9 @@ ethernet@30000 {
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
 			};
 
 			usb@58000 {
@@ -109,6 +113,9 @@ ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
 			};
 
 			mdio@72004 {
@@ -129,6 +136,10 @@ sata@e0000 {
 				status = "okay";
 			};
 
+			bm@c8000 {
+				status = "okay";
+			};
+
 			flash@d0000 {
 				status = "okay";
 				num-cs = <1>;
@@ -169,6 +180,10 @@ usb3@f8000 {
 			};
 		};
 
+		bm-bppi {
+			status = "okay";
+		};
+
 		pcie-controller {
 			status = "okay";
 			/*

arch/arm/boot/dts/armada-388-gp.dts

@@ -60,7 +60,8 @@ soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
 			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
 			spi@10600 {
@@ -133,6 +134,9 @@ ethernet@30000 {
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
 			};
 
 			/* CON4 */
@@ -152,6 +156,9 @@ ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
 			};
 
 
@@ -186,6 +193,10 @@ sata1: sata-port@1 {
 				};
 			};
 
+			bm@c8000 {
+				status = "okay";
+			};
+
 			sata@e0000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&sata2_pins>, <&sata3_pins>;
@@ -240,6 +251,10 @@ usb3@f8000 {
 			};
 		};
 
+		bm-bppi {
+			status = "okay";
+		};
+
 		pcie-controller {
 			status = "okay";
 			/*

arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi

@@ -58,7 +58,8 @@ soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
 			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
 			ethernet@70000 {
@@ -66,6 +67,9 @@ ethernet@70000 {
 				pinctrl-names = "default";
 				phy = <&phy_dedicated>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
 				status = "okay";
 			};
 
@@ -110,6 +114,15 @@ serial@12000 {
 				pinctrl-names = "default";
 				status = "okay";
 			};
+
+			bm@c8000 {
+				status = "okay";
+			};
 		};
+
+		bm-bppi {
+			status = "okay";
+		};
+
 	};
 };

arch/arm/boot/dts/armada-38x.dtsi

@@ -540,6 +540,14 @@ sata@a8000 {
 				status = "disabled";
 			};
 
+			bm: bm@c8000 {
+				compatible = "marvell,armada-380-neta-bm";
+				reg = <0xc8000 0xac>;
+				clocks = <&gateclk 13>;
+				internal-mem = <&bm_bppi>;
+				status = "disabled";
+			};
+
 			sata@e0000 {
 				compatible = "marvell,armada-380-ahci";
 				reg = <0xe0000 0x2000>;
@@ -618,6 +626,17 @@ crypto_sram1: sa-sram1 {
 			#size-cells = <1>;
 			ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>;
 		};
+
+		bm_bppi: bm-bppi {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gateclk 13>;
+			no-memory-wc;
+			status = "disabled";
+		};
 	};
 
 	clocks {

arch/arm/boot/dts/armada-xp-db.dts

@@ -77,7 +77,8 @@ soc {
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
 			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
 			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
 
 		devbus-bootcs {
 			status = "okay";
@@ -181,21 +182,33 @@ ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
 			};
 			ethernet@74000 {
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
 			};
 			ethernet@30000 {
 				status = "okay";
 				phy = <&phy2>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
 			};
 			ethernet@34000 {
 				status = "okay";
 				phy = <&phy3>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
+			};
+
+			bm@c0000 {
+				status = "okay";
 			};
 
 			mvsdio@d4000 {
@@ -230,5 +243,9 @@ spi-flash@0 {
 				};
 			};
 		};
+
+		bm-bppi {
+			status = "okay";
+		};
 	};
 };

arch/arm/boot/dts/armada-xp-gp.dts

@@ -96,7 +96,8 @@ soc {
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
 			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
 			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
 
 		devbus-bootcs {
 			status = "okay";
@@ -196,21 +197,29 @@ ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
 			};
 			ethernet@74000 {
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
 			};
 			ethernet@30000 {
 				status = "okay";
 				phy = <&phy2>;
 				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
 			};
 			ethernet@34000 {
 				status = "okay";
 				phy = <&phy3>;
 				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
 			};
 
 			/* Front-side USB slot */
@@ -235,6 +244,10 @@ spi-flash@0 {
 				};
 			};
 
+			bm@c0000 {
+				status = "okay";
+			};
+
 			nand@d0000 {
 				status = "okay";
 				num-cs = <1>;
@@ -243,5 +256,9 @@ nand@d0000 {
 				nand-on-flash-bbt;
 			};
 		};
+
+		bm-bppi {
+			status = "okay";
+		};
 	};
 };

arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts

@@ -67,7 +67,8 @@ soc {
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
 			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000
 			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xd1200000 0x100000>;
 
 		devbus-bootcs {
 			status = "okay";
@@ -176,21 +177,29 @@ ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
 			};
 			ethernet@74000 {
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
 			};
 			ethernet@30000 {
 				status = "okay";
 				phy = <&phy2>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
 			};
 			ethernet@34000 {
 				status = "okay";
 				phy = <&phy3>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
 			};
 			i2c@11000 {
 				status = "okay";
@@ -219,6 +228,14 @@ usb@50000 {
 			usb@51000 {
 				status = "okay";
 			};
+
+			bm@c0000 {
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
 		};
 	};
 };

arch/arm/boot/dts/armada-xp.dtsi

@@ -253,6 +253,14 @@ crypto@90000 {
 				marvell,crypto-sram-size = <0x800>;
 			};
 
+			bm: bm@c0000 {
+				compatible = "marvell,armada-380-neta-bm";
+				reg = <0xc0000 0xac>;
+				clocks = <&gateclk 13>;
+				internal-mem = <&bm_bppi>;
+				status = "disabled";
+			};
+
 			xor@f0900 {
 				compatible = "marvell,orion-xor";
 				reg = <0xF0900 0x100
@@ -291,6 +299,17 @@ crypto_sram1: sa-sram1 {
 			#size-cells = <1>;
 			ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
 		};
+
+		bm_bppi: bm-bppi {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gateclk 13>;
+			no-memory-wc;
+			status = "disabled";
+		};
 	};
 
 	clocks {

drivers/bus/mvebu-mbus.c

@@ -948,6 +948,58 @@ void mvebu_mbus_get_pcie_io_aperture(struct resource *res)
 	*res = mbus_state.pcie_io_aperture;
 }
 
+int mvebu_mbus_get_dram_win_info(phys_addr_t phyaddr, u8 *target, u8 *attr)
+{
+	const struct mbus_dram_target_info *dram;
+	int i;
+
+	/* Get dram info */
+	dram = mv_mbus_dram_info();
+	if (!dram) {
+		pr_err("missing DRAM information\n");
+		return -ENODEV;
+	}
+
+	/* Try to find matching DRAM window for phyaddr */
+	for (i = 0; i < dram->num_cs; i++) {
+		const struct mbus_dram_window *cs = dram->cs + i;
+
+		if (cs->base <= phyaddr &&
+			phyaddr <= (cs->base + cs->size - 1)) {
+			*target = dram->mbus_dram_target_id;
+			*attr = cs->mbus_attr;
+			return 0;
+		}
+	}
+
+	pr_err("invalid dram address 0x%x\n", phyaddr);
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(mvebu_mbus_get_dram_win_info);
+
+int mvebu_mbus_get_io_win_info(phys_addr_t phyaddr, u32 *size, u8 *target,
+			       u8 *attr)
+{
+	int win;
+
+	for (win = 0; win < mbus_state.soc->num_wins; win++) {
+		u64 wbase;
+		int enabled;
+
+		mvebu_mbus_read_window(&mbus_state, win, &enabled, &wbase,
+				       size, target, attr, NULL);
+
+		if (!enabled)
+			continue;
+
+		if (wbase <= phyaddr && phyaddr <= wbase + *size)
+			return win;
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(mvebu_mbus_get_io_win_info);
+
 static __init int mvebu_mbus_debugfs_init(void)
 {
 	struct mvebu_mbus_state *s = &mbus_state;

drivers/misc/sram.c

@@ -360,7 +360,10 @@ static int sram_probe(struct platform_device *pdev)
 		return -EBUSY;
 	}
 
-	sram->virt_base = devm_ioremap_wc(sram->dev, res->start, size);
+	if (of_property_read_bool(pdev->dev.of_node, "no-memory-wc"))
+		sram->virt_base = devm_ioremap(sram->dev, res->start, size);
+	else
+		sram->virt_base = devm_ioremap_wc(sram->dev, res->start, size);
 	if (IS_ERR(sram->virt_base))
 		return PTR_ERR(sram->virt_base);
 

drivers/net/ethernet/marvell/Kconfig

@@ -40,6 +40,20 @@ config MVMDIO
 
 	  This driver is used by the MV643XX_ETH and MVNETA drivers.
 
+config MVNETA_BM
+	tristate "Marvell Armada 38x/XP network interface BM support"
+	depends on MVNETA
+	select HWBM
+	---help---
+	  This driver supports auxiliary block of the network
+	  interface units in the Marvell ARMADA XP and ARMADA 38x SoC
+	  family, which is called buffer manager.
+
+	  This driver, when enabled, strictly cooperates with mvneta
+	  driver and is common for all network ports of the devices,
+	  even for Armada 370 SoC, which doesn't support hardware
+	  buffer management.
+
 config MVNETA
 	tristate "Marvell Armada 370/38x/XP network interface support"
 	depends on PLAT_ORION

drivers/net/ethernet/marvell/Makefile

@@ -4,6 +4,7 @@
 
 obj-$(CONFIG_MVMDIO) += mvmdio.o
 obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
+obj-$(CONFIG_MVNETA_BM) += mvneta_bm.o
 obj-$(CONFIG_MVNETA) += mvneta.o
 obj-$(CONFIG_MVPP2) += mvpp2.o
 obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o

drivers/net/ethernet/marvell/mvneta_bm.h

+/*
+ * Driver for Marvell NETA network controller Buffer Manager.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Marcin Wojtas <mw@semihalf.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _MVNETA_BM_H_
+#define _MVNETA_BM_H_
+
+/* BM Configuration Register */
+#define MVNETA_BM_CONFIG_REG			0x0
+#define    MVNETA_BM_STATUS_MASK		0x30
+#define    MVNETA_BM_ACTIVE_MASK		BIT(4)
+#define    MVNETA_BM_MAX_IN_BURST_SIZE_MASK	0x60000
+#define    MVNETA_BM_MAX_IN_BURST_SIZE_16BP	BIT(18)
+#define    MVNETA_BM_EMPTY_LIMIT_MASK		BIT(19)
+
+/* BM Activation Register */
+#define MVNETA_BM_COMMAND_REG			0x4
+#define    MVNETA_BM_START_MASK			BIT(0)
+#define    MVNETA_BM_STOP_MASK			BIT(1)
+#define    MVNETA_BM_PAUSE_MASK			BIT(2)
+
+/* BM Xbar interface Register */
+#define MVNETA_BM_XBAR_01_REG			0x8
+#define MVNETA_BM_XBAR_23_REG			0xc
+#define MVNETA_BM_XBAR_POOL_REG(pool)		\
+		(((pool) < 2) ? MVNETA_BM_XBAR_01_REG : MVNETA_BM_XBAR_23_REG)
+#define     MVNETA_BM_TARGET_ID_OFFS(pool)	(((pool) & 1) ? 16 : 0)
+#define     MVNETA_BM_TARGET_ID_MASK(pool)	\
+		(0xf << MVNETA_BM_TARGET_ID_OFFS(pool))
+#define     MVNETA_BM_TARGET_ID_VAL(pool, id)	\
+		((id) << MVNETA_BM_TARGET_ID_OFFS(pool))
+#define     MVNETA_BM_XBAR_ATTR_OFFS(pool)	(((pool) & 1) ? 20 : 4)
+#define     MVNETA_BM_XBAR_ATTR_MASK(pool)	\
+		(0xff << MVNETA_BM_XBAR_ATTR_OFFS(pool))
+#define     MVNETA_BM_XBAR_ATTR_VAL(pool, attr)	\
+		((attr) << MVNETA_BM_XBAR_ATTR_OFFS(pool))
+
+/* Address of External Buffer Pointers Pool Register */
+#define MVNETA_BM_POOL_BASE_REG(pool)		(0x10 + ((pool) << 4))
+#define     MVNETA_BM_POOL_ENABLE_MASK		BIT(0)
+
+/* External Buffer Pointers Pool RD pointer Register */
+#define MVNETA_BM_POOL_READ_PTR_REG(pool)	(0x14 + ((pool) << 4))
+#define     MVNETA_BM_POOL_SET_READ_PTR_MASK	0xfffc
+#define     MVNETA_BM_POOL_GET_READ_PTR_OFFS	16
+#define     MVNETA_BM_POOL_GET_READ_PTR_MASK	0xfffc0000
+
+/* External Buffer Pointers Pool WR pointer */
+#define MVNETA_BM_POOL_WRITE_PTR_REG(pool)	(0x18 + ((pool) << 4))
+#define     MVNETA_BM_POOL_SET_WRITE_PTR_OFFS	0
+#define     MVNETA_BM_POOL_SET_WRITE_PTR_MASK	0xfffc
+#define     MVNETA_BM_POOL_GET_WRITE_PTR_OFFS	16
+#define     MVNETA_BM_POOL_GET_WRITE_PTR_MASK	0xfffc0000
+
+/* External Buffer Pointers Pool Size Register */
+#define MVNETA_BM_POOL_SIZE_REG(pool)		(0x1c + ((pool) << 4))
+#define     MVNETA_BM_POOL_SIZE_MASK		0x3fff
+
+/* BM Interrupt Cause Register */
+#define MVNETA_BM_INTR_CAUSE_REG		(0x50)
+
+/* BM interrupt Mask Register */
+#define MVNETA_BM_INTR_MASK_REG			(0x54)
+
+/* Other definitions */
+#define MVNETA_BM_SHORT_PKT_SIZE		256
+#define MVNETA_BM_POOLS_NUM			4
+#define MVNETA_BM_POOL_CAP_MIN			128
+#define MVNETA_BM_POOL_CAP_DEF			2048
+#define MVNETA_BM_POOL_CAP_MAX			\
+		(16 * 1024 - MVNETA_BM_POOL_CAP_ALIGN)
+#define MVNETA_BM_POOL_CAP_ALIGN		32
+#define MVNETA_BM_POOL_PTR_ALIGN		32
+
+#define MVNETA_BM_POOL_ACCESS_OFFS		8
+
+#define MVNETA_BM_BPPI_SIZE			0x100000
+
+#define MVNETA_RX_BUF_SIZE(pkt_size)   ((pkt_size) + NET_SKB_PAD)
+
+enum mvneta_bm_type {
+	MVNETA_BM_FREE,
+	MVNETA_BM_LONG,
+	MVNETA_BM_SHORT
+};
+
+struct mvneta_bm {
+	void __iomem *reg_base;
+	struct clk *clk;
+	struct platform_device *pdev;
+
+	struct gen_pool *bppi_pool;
+	/* BPPI virtual base address */
+	void __iomem *bppi_virt_addr;
+	/* BPPI physical base address */
+	dma_addr_t bppi_phys_addr;
+
+	/* BM pools */
+	struct mvneta_bm_pool *bm_pools;
+};
+
+struct mvneta_bm_pool {
+	struct hwbm_pool hwbm_pool;
+	/* Pool number in the range 0-3 */
+	u8 id;
+	enum mvneta_bm_type type;
+
+	/* Packet size */
+	int pkt_size;
+	/* Size of the buffer acces through DMA*/
+	u32 buf_size;
+
+	/* BPPE virtual base address */
+	u32 *virt_addr;
+	/* BPPE physical base address */
+	dma_addr_t phys_addr;
+
+	/* Ports using BM pool */
+	u8 port_map;
+
+	struct mvneta_bm *priv;
+};
+
+/* Declarations and definitions */
+void *mvneta_frag_alloc(unsigned int frag_size);
+void mvneta_frag_free(unsigned int frag_size, void *data);
+
+#if defined(CONFIG_MVNETA_BM) || defined(CONFIG_MVNETA_BM_MODULE)
+void mvneta_bm_pool_destroy(struct mvneta_bm *priv,
+			    struct mvneta_bm_pool *bm_pool, u8 port_map);
+void mvneta_bm_bufs_free(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
+			 u8 port_map);
+int mvneta_bm_construct(struct hwbm_pool *hwbm_pool, void *buf);
+int mvneta_bm_pool_refill(struct mvneta_bm *priv,
+			  struct mvneta_bm_pool *bm_pool);
+struct mvneta_bm_pool *mvneta_bm_pool_use(struct mvneta_bm *priv, u8 pool_id,
+					  enum mvneta_bm_type type, u8 port_id,
+					  int pkt_size);
+
+static inline void mvneta_bm_pool_put_bp(struct mvneta_bm *priv,
+					 struct mvneta_bm_pool *bm_pool,
+					 dma_addr_t buf_phys_addr)
+{
+	writel_relaxed(buf_phys_addr, priv->bppi_virt_addr +
+		       (bm_pool->id << MVNETA_BM_POOL_ACCESS_OFFS));
+}
+
+static inline u32 mvneta_bm_pool_get_bp(struct mvneta_bm *priv,
+					struct mvneta_bm_pool *bm_pool)
+{
+	return readl_relaxed(priv->bppi_virt_addr +
+			     (bm_pool->id << MVNETA_BM_POOL_ACCESS_OFFS));
+}
+#else
+void mvneta_bm_pool_destroy(struct mvneta_bm *priv,
+			    struct mvneta_bm_pool *bm_pool, u8 port_map) {}
+void mvneta_bm_bufs_free(struct mvneta_bm *priv, struct mvneta_bm_pool *bm_pool,
+			 u8 port_map) {}
+int mvneta_bm_construct(struct hwbm_pool *hwbm_pool, void *buf) { return 0; }
+int mvneta_bm_pool_refill(struct mvneta_bm *priv,
+			  struct mvneta_bm_pool *bm_pool) {return 0; }
+struct mvneta_bm_pool *mvneta_bm_pool_use(struct mvneta_bm *priv, u8 pool_id,
+					  enum mvneta_bm_type type, u8 port_id,
+					  int pkt_size) { return NULL; }
+
+static inline void mvneta_bm_pool_put_bp(struct mvneta_bm *priv,
+					 struct mvneta_bm_pool *bm_pool,
+					 dma_addr_t buf_phys_addr) {}
+
+static inline u32 mvneta_bm_pool_get_bp(struct mvneta_bm *priv,
+					struct mvneta_bm_pool *bm_pool)
+{ return 0; }
+#endif /* CONFIG_MVNETA_BM */
+#endif

include/linux/mbus.h

@@ -69,6 +69,9 @@ static inline const struct mbus_dram_target_info *mv_mbus_dram_info_nooverlap(vo
 int mvebu_mbus_save_cpu_target(u32 *store_addr);
 void mvebu_mbus_get_pcie_mem_aperture(struct resource *res);
 void mvebu_mbus_get_pcie_io_aperture(struct resource *res);
+int mvebu_mbus_get_dram_win_info(phys_addr_t phyaddr, u8 *target, u8 *attr);
+int mvebu_mbus_get_io_win_info(phys_addr_t phyaddr, u32 *size, u8 *target,
+			       u8 *attr);
 int mvebu_mbus_add_window_remap_by_id(unsigned int target,
 				      unsigned int attribute,
 				      phys_addr_t base, size_t size,

include/net/hwbm.h

+#ifndef _HWBM_H
+#define _HWBM_H
+
+struct hwbm_pool {
+	/* Capacity of the pool */
+	int size;
+	/* Size of the buffers managed */
+	int frag_size;
+	/* Number of buffers currently used by this pool */
+	int buf_num;
+	/* constructor called during alocation */
+	int (*construct)(struct hwbm_pool *bm_pool, void *buf);
+	/* protect acces to the buffer counter*/
+	spinlock_t lock;
+	/* private data */
+	void *priv;
+};
+#ifdef CONFIG_HWBM
+void hwbm_buf_free(struct hwbm_pool *bm_pool, void *buf);
+int hwbm_pool_refill(struct hwbm_pool *bm_pool, gfp_t gfp);
+int hwbm_pool_add(struct hwbm_pool *bm_pool, unsigned int buf_num, gfp_t gfp);
+#else
+void hwbm_buf_free(struct hwbm_pool *bm_pool, void *buf) {}
+int hwbm_pool_refill(struct hwbm_pool *bm_pool, gfp_t gfp) { return 0; }
+int hwbm_pool_add(struct hwbm_pool *bm_pool, unsigned int buf_num, gfp_t gfp)
+{ return 0; }
+#endif /* CONFIG_HWBM */
+#endif /* _HWBM_H */

net/Kconfig

@@ -253,6 +253,9 @@ config XPS
 	depends on SMP
 	default y
 
+config HWBM
+       bool
+
 config SOCK_CGROUP_DATA
 	bool
 	default n

net/core/Makefile

@@ -25,4 +25,5 @@ obj-$(CONFIG_CGROUP_NET_PRIO) += netprio_cgroup.o
 obj-$(CONFIG_CGROUP_NET_CLASSID) += netclassid_cgroup.o
 obj-$(CONFIG_LWTUNNEL) += lwtunnel.o
 obj-$(CONFIG_DST_CACHE) += dst_cache.o
+obj-$(CONFIG_HWBM) += hwbm.o
 obj-$(CONFIG_NET_DEVLINK) += devlink.o

net/core/hwbm.c

+/* Support for hardware buffer manager.
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/printk.h>
+#include <linux/skbuff.h>
+#include <net/hwbm.h>
+
+void hwbm_buf_free(struct hwbm_pool *bm_pool, void *buf)
+{
+	if (likely(bm_pool->frag_size <= PAGE_SIZE))
+		skb_free_frag(buf);
+	else
+		kfree(buf);
+}
+EXPORT_SYMBOL_GPL(hwbm_buf_free);
+
+/* Refill processing for HW buffer management */
+int hwbm_pool_refill(struct hwbm_pool *bm_pool, gfp_t gfp)
+{
+	int frag_size = bm_pool->frag_size;
+	void *buf;
+
+	if (likely(frag_size <= PAGE_SIZE))
+		buf = netdev_alloc_frag(frag_size);
+	else
+		buf = kmalloc(frag_size, gfp);
+
+	if (!buf)
+		return -ENOMEM;
+
+	if (bm_pool->construct)
+		if (bm_pool->construct(bm_pool, buf)) {
+			hwbm_buf_free(bm_pool, buf);
+			return -ENOMEM;
+		}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(hwbm_pool_refill);
+
+int hwbm_pool_add(struct hwbm_pool *bm_pool, unsigned int buf_num, gfp_t gfp)
+{
+	int err, i;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bm_pool->lock, flags);
+	if (bm_pool->buf_num == bm_pool->size) {
+		pr_warn("pool already filled\n");
+		return bm_pool->buf_num;
+	}
+
+	if (buf_num + bm_pool->buf_num > bm_pool->size) {
+		pr_warn("cannot allocate %d buffers for pool\n",
+			buf_num);
+		return 0;
+	}
+
+	if ((buf_num + bm_pool->buf_num) < bm_pool->buf_num) {
+		pr_warn("Adding %d buffers to the %d current buffers will overflow\n",
+			buf_num,  bm_pool->buf_num);
+		return 0;
+	}
+
+	for (i = 0; i < buf_num; i++) {
+		err = hwbm_pool_refill(bm_pool, gfp);
+		if (err < 0)
+			break;
+	}
+
+	/* Update BM driver with number of buffers added to pool */
+	bm_pool->buf_num += i;
+
+	pr_debug("hwpm pool: %d of %d buffers added\n", i, buf_num);
+	spin_unlock_irqrestore(&bm_pool->lock, flags);
+
+	return i;
+}
+EXPORT_SYMBOL_GPL(hwbm_pool_add);