Commit c9771bfd authored by David S. Miller's avatar David S. Miller

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates

This series contains updates to ixgbe and e1000e.

Jacob provides a ixgbe patch to fix the configure_rx patch to properly
disable RSC hardware logic when a user disables it.  Previously we only
disabled RSC in the queue settings, but this does not fully disable
hardware RSC logic which can lead to unexpected performance issues.

Emil provides three fixes for ixgbe.  First fixes the ethtool loopback
test when DCB is enabled, where the frames may be modified on Tx
(by adding VLAN tag) which will fail the check on receive.  Then a fix
for QSFP+ modules, limit the speed setting to advertise only one speed
at a time since the QSFP+ modules do not support auto negotiation.
Lastly, resolve an issue where the driver will display incorrect info
for QSFP+ modules that were inserted after the driver has been loaded.

David Ertman provides to fixes for e1000e, one removes a comparison to
the boolean value true where evaluating the lvalue will produce the
same result.  The other fixes an error in the calculation of the
rar_entry_count, which causes a write of unkown/undefined register
space in the MAC to unknown/undefined register space in the PHY.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 89473129 c3a0dce3
......@@ -922,6 +922,14 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
else
mask &= ~(1 << 30);
}
if (mac->type == e1000_pch2lan) {
/* SHRAH[0,1,2] different than previous */
if (i == 7)
mask &= 0xFFF4FFFF;
/* SHRAH[3] different than SHRAH[0,1,2] */
if (i == 10)
mask |= (1 << 30);
}
REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1), mask,
0xFFFFFFFF);
......
......@@ -1371,7 +1371,10 @@ static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index)
return;
}
if (index < hw->mac.rar_entry_count) {
/* RAR[1-6] are owned by manageability. Skip those and program the
* next address into the SHRA register array.
*/
if (index < (u32)(hw->mac.rar_entry_count - 6)) {
s32 ret_val;
ret_val = e1000_acquire_swflag_ich8lan(hw);
......@@ -1962,8 +1965,8 @@ void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw)
if (ret_val)
goto release;
/* Copy both RAL/H (rar_entry_count) and SHRAL/H (+4) to PHY */
for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) {
/* Copy both RAL/H (rar_entry_count) and SHRAL/H to PHY */
for (i = 0; i < (hw->mac.rar_entry_count); i++) {
mac_reg = er32(RAL(i));
hw->phy.ops.write_reg_page(hw, BM_RAR_L(i),
(u16)(mac_reg & 0xFFFF));
......@@ -2007,10 +2010,10 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
return ret_val;
if (enable) {
/* Write Rx addresses (rar_entry_count for RAL/H, +4 for
/* Write Rx addresses (rar_entry_count for RAL/H, and
* SHRAL/H) and initial CRC values to the MAC
*/
for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) {
for (i = 0; i < hw->mac.rar_entry_count; i++) {
u8 mac_addr[ETH_ALEN] = { 0 };
u32 addr_high, addr_low;
......
......@@ -98,7 +98,7 @@
#define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL
#define E1000_ICH_RAR_ENTRIES 7
#define E1000_PCH2_RAR_ENTRIES 5 /* RAR[0], SHRA[0-3] */
#define E1000_PCH2_RAR_ENTRIES 11 /* RAR[0-6], SHRA[0-3] */
#define E1000_PCH_LPT_RAR_ENTRIES 12 /* RAR[0], SHRA[0-10] */
#define PHY_PAGE_SHIFT 5
......
......@@ -4868,7 +4868,7 @@ static void e1000_watchdog_task(struct work_struct *work)
*/
if ((hw->phy.type == e1000_phy_igp_3 ||
hw->phy.type == e1000_phy_bm) &&
(hw->mac.autoneg == true) &&
hw->mac.autoneg &&
(adapter->link_speed == SPEED_10 ||
adapter->link_speed == SPEED_100) &&
(adapter->link_duplex == HALF_DUPLEX)) {
......
......@@ -160,6 +160,13 @@ static int ixgbe_get_settings(struct net_device *netdev,
bool autoneg = false;
bool link_up;
/* SFP type is needed for get_link_capabilities */
if (hw->phy.media_type & (ixgbe_media_type_fiber |
ixgbe_media_type_fiber_qsfp)) {
if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
hw->phy.ops.identify_sfp(hw);
}
hw->mac.ops.get_link_capabilities(hw, &supported_link, &autoneg);
/* set the supported link speeds */
......@@ -186,6 +193,11 @@ static int ixgbe_get_settings(struct net_device *netdev,
ecmd->advertising |= ADVERTISED_1000baseT_Full;
if (supported_link & IXGBE_LINK_SPEED_100_FULL)
ecmd->advertising |= ADVERTISED_100baseT_Full;
if (hw->phy.multispeed_fiber && !autoneg) {
if (supported_link & IXGBE_LINK_SPEED_10GB_FULL)
ecmd->advertising = ADVERTISED_10000baseT_Full;
}
}
if (autoneg) {
......@@ -314,6 +326,14 @@ static int ixgbe_set_settings(struct net_device *netdev,
if (ecmd->advertising & ~ecmd->supported)
return -EINVAL;
/* only allow one speed at a time if no autoneg */
if (!ecmd->autoneg && hw->phy.multispeed_fiber) {
if (ecmd->advertising ==
(ADVERTISED_10000baseT_Full |
ADVERTISED_1000baseT_Full))
return -EINVAL;
}
old = hw->phy.autoneg_advertised;
advertised = 0;
if (ecmd->advertising & ADVERTISED_10000baseT_Full)
......@@ -1805,6 +1825,10 @@ static int ixgbe_run_loopback_test(struct ixgbe_adapter *adapter)
unsigned int size = 1024;
netdev_tx_t tx_ret_val;
struct sk_buff *skb;
u32 flags_orig = adapter->flags;
/* DCB can modify the frames on Tx */
adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
/* allocate test skb */
skb = alloc_skb(size, GFP_KERNEL);
......@@ -1857,6 +1881,7 @@ static int ixgbe_run_loopback_test(struct ixgbe_adapter *adapter)
/* free the original skb */
kfree_skb(skb);
adapter->flags = flags_orig;
return ret_val;
}
......
......@@ -3571,7 +3571,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
int i;
u32 rxctrl;
u32 rxctrl, rfctl;
/* disable receives while setting up the descriptors */
rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
......@@ -3580,6 +3580,13 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
ixgbe_setup_psrtype(adapter);
ixgbe_setup_rdrxctl(adapter);
/* RSC Setup */
rfctl = IXGBE_READ_REG(hw, IXGBE_RFCTL);
rfctl &= ~IXGBE_RFCTL_RSC_DIS;
if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED))
rfctl |= IXGBE_RFCTL_RSC_DIS;
IXGBE_WRITE_REG(hw, IXGBE_RFCTL, rfctl);
/* Program registers for the distribution of queues */
ixgbe_setup_mrqc(adapter);
......@@ -5993,8 +6000,16 @@ static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter)
adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG;
speed = hw->phy.autoneg_advertised;
if ((!speed) && (hw->mac.ops.get_link_capabilities))
if ((!speed) && (hw->mac.ops.get_link_capabilities)) {
hw->mac.ops.get_link_capabilities(hw, &speed, &autoneg);
/* setup the highest link when no autoneg */
if (!autoneg) {
if (speed & IXGBE_LINK_SPEED_10GB_FULL)
speed = IXGBE_LINK_SPEED_10GB_FULL;
}
}
if (hw->mac.ops.setup_link)
hw->mac.ops.setup_link(hw, speed, true);
......
......@@ -1861,6 +1861,7 @@ enum {
#define IXGBE_RFCTL_ISCSI_DIS 0x00000001
#define IXGBE_RFCTL_ISCSI_DWC_MASK 0x0000003E
#define IXGBE_RFCTL_ISCSI_DWC_SHIFT 1
#define IXGBE_RFCTL_RSC_DIS 0x00000020
#define IXGBE_RFCTL_NFSW_DIS 0x00000040
#define IXGBE_RFCTL_NFSR_DIS 0x00000080
#define IXGBE_RFCTL_NFS_VER_MASK 0x00000300
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment