ide: print banner message once per controller in m68k host drivers

* Print banner message once per controller in m68k host drivers.

* Change printk() level to KERN_INFO in buddha, falconide and gayle.

* Add banner message to q40ide.

This is basically a preparation for the future IDE layer changes.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent 81ca6919
......@@ -112,6 +112,7 @@ typedef enum BuddhaType_Enum {
BOARD_BUDDHA, BOARD_CATWEASEL, BOARD_XSURF
} BuddhaType;
static const char *buddha_board_name[] = { "Buddha", "Catweasel", "X-Surf" };
/*
* Check and acknowledge the interrupt status
......@@ -197,7 +198,10 @@ static int __init buddha_init(void)
/* X-Surf doesn't have this. IRQs are always on */
if (type != BOARD_XSURF)
z_writeb(0, buddha_board+BUDDHA_IRQ_MR);
printk(KERN_INFO "ide: %s IDE controller\n",
buddha_board_name[type]);
for(i=0;i<buddha_num_hwifs;i++) {
if(type != BOARD_XSURF) {
ide_setup_ports(&hw, (buddha_board+buddha_bases[i]),
......@@ -223,19 +227,6 @@ static int __init buddha_init(void)
ide_init_port_hw(hwif, &hw);
hwif->mmio = 1;
printk("ide%d: ", index);
switch(type) {
case BOARD_BUDDHA:
printk("Buddha");
break;
case BOARD_CATWEASEL:
printk("Catweasel");
break;
case BOARD_XSURF:
printk("X-Surf");
break;
}
printk(" IDE interface\n");
idx[i] = index;
}
......
......@@ -67,6 +67,8 @@ static int __init falconide_init(void)
if (MACH_IS_ATARI && ATARIHW_PRESENT(IDE)) {
hw_regs_t hw;
printk(KERN_INFO "ide: Falcon IDE controller\n");
ide_setup_ports(&hw, ATA_HD_BASE, falconide_offsets,
0, 0, NULL,
// falconide_iops,
......@@ -80,8 +82,6 @@ static int __init falconide_init(void)
ide_init_port_data(hwif, index);
ide_init_port_hw(hwif, &hw);
printk("ide%d: Falcon IDE interface\n", index);
ide_device_add(idx);
}
}
......
......@@ -129,6 +129,13 @@ static int __init gayle_init(void)
return -ENODEV;
found:
printk(KERN_INFO "ide: Gayle IDE controller (A%d style%s)\n",
a4000 ? 4000 : 1200,
#ifdef CONFIG_BLK_DEV_IDEDOUBLER
ide_doubler ? ", IDE doubler" :
#endif
"");
for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++) {
unsigned long base, ctrlport, irqport;
ide_ack_intr_t *ack_intr;
......@@ -173,17 +180,6 @@ static int __init gayle_init(void)
ide_init_port_hw(hwif, &hw);
hwif->mmio = 1;
switch (i) {
case 0:
printk("ide%d: Gayle IDE interface (A%d style)\n", index,
a4000 ? 4000 : 1200);
break;
#ifdef CONFIG_BLK_DEV_IDEDOUBLER
case 1:
printk("ide%d: IDE doubler\n", index);
break;
#endif /* CONFIG_BLK_DEV_IDEDOUBLER */
}
idx[i] = index;
} else
......
......@@ -77,6 +77,9 @@ int macide_ack_intr(ide_hwif_t* hwif)
return 0;
}
static const char *mac_ide_name[] =
{ "Quadra", "Powerbook", "Powerbook Baboon" };
/*
* Probe for a Macintosh IDE interface
*/
......@@ -109,6 +112,9 @@ static int __init macide_init(void)
return -ENODEV;
}
printk(KERN_INFO "ide: Macintosh %s IDE controller\n",
mac_ide_name[macintosh_config->ide_type - 1]);
hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]);
if (hwif) {
u8 index = hwif->index;
......@@ -128,14 +134,6 @@ static int __init macide_init(void)
}
hwif->mmio = 1;
if (macintosh_config->ide_type == MAC_IDE_QUADRA)
printk(KERN_INFO "ide%d: Macintosh Quadra IDE interface\n", index);
else if (macintosh_config->ide_type == MAC_IDE_PB)
printk(KERN_INFO "ide%d: Macintosh Powerbook IDE interface\n", index);
else if (macintosh_config->ide_type == MAC_IDE_BABOON)
printk(KERN_INFO "ide%d: Macintosh Powerbook Baboon IDE interface\n", index);
else
printk(KERN_INFO "ide%d: Unknown Macintosh IDE interface\n", index);
ide_device_add(idx);
}
......
......@@ -121,6 +121,8 @@ static int __init q40ide_init(void)
if (!MACH_IS_Q40)
return -ENODEV;
printk(KERN_INFO "ide: Q40 IDE controller\n");
for (i = 0; i < Q40IDE_NUM_HWIFS; i++) {
hw_regs_t hw;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment