dt-bindings: Remove "status" from schema examples, again

There's no reason to have "status" properties in examples. "okay" is the
default, and "disabled" turns off some schema checks ('required'
specifically).

A meta-schema check for this is pending, so hopefully the last time to
fix these.

Fix the indentation in intel,phy-thunderbay-emmc while we're here.
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20221014205104.2822159-1-robh@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml

@@ -47,5 +47,4 @@ examples:
       compatible = "nvidia,tegra234-ccplex-cluster";
       reg = <0x0e000000 0x5ffff>;
       nvidia,bpmp = <&bpmp>;
-      status = "okay";
     };

Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml

@@ -128,7 +128,6 @@ examples:
         resets = <&tegra_car 181>;
         reset-names = "dpaux";
         power-domains = <&pd_sor>;
-        status = "disabled";
 
         state_dpaux_aux: pinmux-aux {
             groups = "dpaux-io";

Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml

@@ -138,7 +138,6 @@ examples:
                  <&bpmp TEGRA186_CLK_NVDISPLAY_DSC>,
                  <&bpmp TEGRA186_CLK_NVDISPLAYHUB>;
         clock-names = "disp", "dsc", "hub";
-        status = "disabled";
 
         power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
 
@@ -227,7 +226,6 @@ examples:
         clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_DISP>,
                  <&bpmp TEGRA194_CLK_NVDISPLAYHUB>;
         clock-names = "disp", "hub";
-        status = "disabled";
 
         power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
 

Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml

@@ -114,7 +114,6 @@ examples:
       #size-cells = <0>;
 
       cs-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-      status = "okay";
 
       ad74413r@0 {
         compatible = "adi,ad74413r";

Documentation/devicetree/bindings/net/cdns,macb.yaml

@@ -203,7 +203,6 @@ examples:
                     power-domains = <&zynqmp_firmware PD_ETH_1>;
                     resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>;
                     reset-names = "gem1_rst";
-                    status = "okay";
                     phy-mode = "sgmii";
                     phys = <&psgtr 1 PHY_TYPE_SGMII 1 1>;
                     fixed-link {

Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml

@@ -92,5 +92,4 @@ examples:
                      <&clk IMX8MP_CLK_ENET_QOS>;
             clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
             phy-mode = "rgmii";
-            status = "disabled";
     };

Documentation/devicetree/bindings/phy/intel,phy-thunderbay-emmc.yaml

@@ -36,11 +36,10 @@ additionalProperties: false
 
 examples:
   - |
-     mmc_phy@80440800 {
-     #phy-cells = <0x0>;
-     compatible = "intel,thunderbay-emmc-phy";
-     status = "okay";
-     reg = <0x80440800 0x100>;
-     clocks = <&emmc>;
-     clock-names = "emmcclk";
-     };
+    mmc_phy@80440800 {
+        #phy-cells = <0x0>;
+        compatible = "intel,thunderbay-emmc-phy";
+        reg = <0x80440800 0x100>;
+        clocks = <&emmc>;
+        clock-names = "emmcclk";
+    };