Commit ca361b65 authored by Alex Deucher's avatar Alex Deucher

drm/radeon/kms: add new asic struct for rv6xx (v4)

Has a different dpm controller than r600.

v2: rebase on gpu reset changes
v3: rebase on get_xclk changes
v4: update rptr/wtpr callbacks
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent ae5b0abb
...@@ -1061,6 +1061,99 @@ static struct radeon_asic r600_asic = { ...@@ -1061,6 +1061,99 @@ static struct radeon_asic r600_asic = {
}, },
}; };
static struct radeon_asic rv6xx_asic = {
.init = &r600_init,
.fini = &r600_fini,
.suspend = &r600_suspend,
.resume = &r600_resume,
.vga_set_state = &r600_vga_set_state,
.asic_reset = &r600_asic_reset,
.ioctl_wait_idle = r600_ioctl_wait_idle,
.gui_idle = &r600_gui_idle,
.mc_wait_for_idle = &r600_mc_wait_for_idle,
.get_xclk = &r600_get_xclk,
.get_gpu_clock_counter = &r600_get_gpu_clock_counter,
.gart = {
.tlb_flush = &r600_pcie_gart_tlb_flush,
.set_page = &rs600_gart_set_page,
},
.ring = {
[RADEON_RING_TYPE_GFX_INDEX] = {
.ib_execute = &r600_ring_ib_execute,
.emit_fence = &r600_fence_ring_emit,
.emit_semaphore = &r600_semaphore_ring_emit,
.cs_parse = &r600_cs_parse,
.ring_test = &r600_ring_test,
.ib_test = &r600_ib_test,
.is_lockup = &r600_gfx_is_lockup,
.get_rptr = &radeon_ring_generic_get_rptr,
.get_wptr = &radeon_ring_generic_get_wptr,
.set_wptr = &radeon_ring_generic_set_wptr,
},
[R600_RING_TYPE_DMA_INDEX] = {
.ib_execute = &r600_dma_ring_ib_execute,
.emit_fence = &r600_dma_fence_ring_emit,
.emit_semaphore = &r600_dma_semaphore_ring_emit,
.cs_parse = &r600_dma_cs_parse,
.ring_test = &r600_dma_ring_test,
.ib_test = &r600_dma_ib_test,
.is_lockup = &r600_dma_is_lockup,
.get_rptr = &radeon_ring_generic_get_rptr,
.get_wptr = &radeon_ring_generic_get_wptr,
.set_wptr = &radeon_ring_generic_set_wptr,
}
},
.irq = {
.set = &r600_irq_set,
.process = &r600_irq_process,
},
.display = {
.bandwidth_update = &rv515_bandwidth_update,
.get_vblank_counter = &rs600_get_vblank_counter,
.wait_for_vblank = &avivo_wait_for_vblank,
.set_backlight_level = &atombios_set_backlight_level,
.get_backlight_level = &atombios_get_backlight_level,
},
.copy = {
.blit = &r600_copy_blit,
.blit_ring_index = RADEON_RING_TYPE_GFX_INDEX,
.dma = &r600_copy_dma,
.dma_ring_index = R600_RING_TYPE_DMA_INDEX,
.copy = &r600_copy_dma,
.copy_ring_index = R600_RING_TYPE_DMA_INDEX,
},
.surface = {
.set_reg = r600_set_surface_reg,
.clear_reg = r600_clear_surface_reg,
},
.hpd = {
.init = &r600_hpd_init,
.fini = &r600_hpd_fini,
.sense = &r600_hpd_sense,
.set_polarity = &r600_hpd_set_polarity,
},
.pm = {
.misc = &r600_pm_misc,
.prepare = &rs600_pm_prepare,
.finish = &rs600_pm_finish,
.init_profile = &r600_pm_init_profile,
.get_dynpm_state = &r600_pm_get_dynpm_state,
.get_engine_clock = &radeon_atom_get_engine_clock,
.set_engine_clock = &radeon_atom_set_engine_clock,
.get_memory_clock = &radeon_atom_get_memory_clock,
.set_memory_clock = &radeon_atom_set_memory_clock,
.get_pcie_lanes = &r600_get_pcie_lanes,
.set_pcie_lanes = &r600_set_pcie_lanes,
.set_clock_gating = NULL,
.get_temperature = &rv6xx_get_temp,
},
.pflip = {
.pre_page_flip = &rs600_pre_page_flip,
.page_flip = &rs600_page_flip,
.post_page_flip = &rs600_post_page_flip,
},
};
static struct radeon_asic rs780_asic = { static struct radeon_asic rs780_asic = {
.init = &r600_init, .init = &r600_init,
.fini = &r600_fini, .fini = &r600_fini,
...@@ -2454,16 +2547,15 @@ int radeon_asic_init(struct radeon_device *rdev) ...@@ -2454,16 +2547,15 @@ int radeon_asic_init(struct radeon_device *rdev)
rdev->asic = &r520_asic; rdev->asic = &r520_asic;
break; break;
case CHIP_R600: case CHIP_R600:
rdev->asic = &r600_asic;
break;
case CHIP_RV610: case CHIP_RV610:
case CHIP_RV630: case CHIP_RV630:
case CHIP_RV620: case CHIP_RV620:
case CHIP_RV635: case CHIP_RV635:
case CHIP_RV670: case CHIP_RV670:
rdev->asic = &r600_asic; rdev->asic = &rv6xx_asic;
if (rdev->family == CHIP_R600) rdev->has_uvd = true;
rdev->has_uvd = false;
else
rdev->has_uvd = true;
break; break;
case CHIP_RS780: case CHIP_RS780:
case CHIP_RS880: case CHIP_RS880:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment