drm/amd/pm: add the fine grain tuning function for renoir

This patch is to add the fine grain tuning function for renoir.
This function uses the pp_od_clk_voltage sysfs file to configure the min
and max value of gfx clock frequency manually or restore the default value.

Command guide:
echo "s level value" > pp_od_clk_voltage
        "s" - set the sclk frequency
        "level" - 0 or 1, "0" represents the min value,  "1" represents
        the max value
        "value" - the target value of sclk frequency, it should
        be limited in the safe range
echo "r" > pp_od_clk_voltage
        "r" - reset the sclk frequency, restore the default value instantly
echo "c" > pp_od_clk_voltage
        "c" - commit the min and max value of sclk frequency to the system
        only after the commit command, the target values set by "s" command
        will take effect.
Example:
1)change power profile from "auto" to "standard"
        $ cat power_dpm_force_performance_level
        auto
        $ echo "profile_standard" > power_dpm_force_performance_level
        $ cat power_dpm_force_performance_level
        profile_standard
2)check the default sclk frequency
        $ cat pp_od_clk_voltage
        OD_SCLK:
        0:        200Mhz
        1:       1400Mhz
        OD_RANGE:
        SCLK:     200MHz       1400MHz
3)use "s" -- set command to configure the min and max sclk frequency
        $ echo "s 0 600" > pp_od_clk_voltage
        $ echo "s 1 1000" > pp_od_clk_voltage
        $ echo "c" > pp_od_clk_voltage
        $ cat pp_od_clk_voltage
        OD_SCLK:
        0:        600Mhz
        1:       1000Mhz
        OD_RANGE:
        SCLK:     200MHz       1400MHz
4)use "r" -- reset command to restore the min or max sclk frequency
        $ echo "r" > pp_od_clk_voltage
        $ cat pp_od_clk_voltage
        OD_SCLK:
        0:        200Mhz
        1:       1400Mhz
        OD_RANGE:
        SCLK:     200MHz       1400MHz
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c

@@ -343,6 +343,129 @@ static int renoir_get_dpm_ultimate_freq(struct smu_context *smu,
 	return ret;
 }
 
+static int renoir_od_edit_dpm_table(struct smu_context *smu,
+							enum PP_OD_DPM_TABLE_COMMAND type,
+							long input[], uint32_t size)
+{
+	int ret = 0;
+
+	if (!smu->od_enabled) {
+		dev_warn(smu->adev->dev, "Fine grain is not enabled!\n");
+		return -EINVAL;
+	}
+
+	switch (type) {
+	case PP_OD_EDIT_SCLK_VDDC_TABLE:
+		if (size != 2) {
+			dev_err(smu->adev->dev, "Input parameter number not correct\n");
+			return -EINVAL;
+		}
+
+		if (input[0] == 0) {
+			if (input[1] < smu->gfx_default_hard_min_freq) {
+				dev_warn(smu->adev->dev, "Fine grain setting minimum sclk (%ld) MHz is less than the minimum allowed (%d) MHz\n",
+					input[1], smu->gfx_default_hard_min_freq);
+				return -EINVAL;
+			}
+			smu->gfx_actual_hard_min_freq = input[1];
+		} else if (input[0] == 1) {
+			if (input[1] > smu->gfx_default_soft_max_freq) {
+				dev_warn(smu->adev->dev, "Fine grain setting maximum sclk (%ld) MHz is greater than the maximum allowed (%d) MHz\n",
+					input[1], smu->gfx_default_soft_max_freq);
+				return -EINVAL;
+			}
+			smu->gfx_actual_soft_max_freq = input[1];
+		} else {
+			return -EINVAL;
+		}
+		break;
+	case PP_OD_RESTORE_DEFAULT_TABLE:
+		if (size != 0) {
+			dev_err(smu->adev->dev, "Input parameter number not correct\n");
+			return -EINVAL;
+		}
+		smu->gfx_actual_hard_min_freq = smu->gfx_default_hard_min_freq;
+		smu->gfx_actual_soft_max_freq = smu->gfx_default_soft_max_freq;
+
+		ret = smu_cmn_send_smc_msg_with_param(smu,
+								SMU_MSG_SetHardMinGfxClk,
+								smu->gfx_actual_hard_min_freq,
+								NULL);
+		if (ret) {
+			dev_err(smu->adev->dev, "Restore the default hard min sclk failed!");
+			return ret;
+		}
+
+		ret = smu_cmn_send_smc_msg_with_param(smu,
+								SMU_MSG_SetSoftMaxGfxClk,
+								smu->gfx_actual_soft_max_freq,
+								NULL);
+		if (ret) {
+			dev_err(smu->adev->dev, "Restore the default soft max sclk failed!");
+			return ret;
+		}
+		break;
+	case PP_OD_COMMIT_DPM_TABLE:
+		if (size != 0) {
+			dev_err(smu->adev->dev, "Input parameter number not correct\n");
+			return -EINVAL;
+		} else {
+			if (smu->gfx_actual_hard_min_freq > smu->gfx_actual_soft_max_freq) {
+				dev_err(smu->adev->dev, "The setting minimun sclk (%d) MHz is greater than the setting maximum sclk (%d) MHz\n",
+				smu->gfx_actual_hard_min_freq, smu->gfx_actual_soft_max_freq);
+				return -EINVAL;
+			}
+
+			ret = smu_cmn_send_smc_msg_with_param(smu,
+								SMU_MSG_SetHardMinGfxClk,
+								smu->gfx_actual_hard_min_freq,
+								NULL);
+			if (ret) {
+				dev_err(smu->adev->dev, "Set hard min sclk failed!");
+				return ret;
+			}
+
+			ret = smu_cmn_send_smc_msg_with_param(smu,
+								SMU_MSG_SetSoftMaxGfxClk,
+								smu->gfx_actual_soft_max_freq,
+								NULL);
+			if (ret) {
+				dev_err(smu->adev->dev, "Set soft max sclk failed!");
+				return ret;
+			}
+		}
+		break;
+	default:
+		return -ENOSYS;
+	}
+
+	return ret;
+}
+
+static int renoir_set_fine_grain_gfx_freq_parameters(struct smu_context *smu)
+{
+	uint32_t min = 0, max = 0;
+	uint32_t ret = 0;
+
+	ret = smu_cmn_send_smc_msg_with_param(smu,
+								SMU_MSG_GetMinGfxclkFrequency,
+								0, &min);
+	if (ret)
+		return ret;
+	ret = smu_cmn_send_smc_msg_with_param(smu,
+								SMU_MSG_GetMaxGfxclkFrequency,
+								0, &max);
+	if (ret)
+		return ret;
+
+	smu->gfx_default_hard_min_freq = min;
+	smu->gfx_default_soft_max_freq = max;
+	smu->gfx_actual_hard_min_freq = 0;
+	smu->gfx_actual_soft_max_freq = 0;
+
+	return 0;
+}
+
 static int renoir_print_clk_levels(struct smu_context *smu,
 			enum smu_clk_type clk_type, char *buf)
 {
@@ -358,6 +481,28 @@ static int renoir_print_clk_levels(struct smu_context *smu,
 		return ret;
 
 	switch (clk_type) {
+	case SMU_OD_RANGE:
+		if (smu->od_enabled) {
+			ret = smu_cmn_send_smc_msg_with_param(smu,
+						SMU_MSG_GetMinGfxclkFrequency,
+						0, &min);
+			if (ret)
+				return ret;
+			ret = smu_cmn_send_smc_msg_with_param(smu,
+						SMU_MSG_GetMaxGfxclkFrequency,
+						0, &max);
+			if (ret)
+				return ret;
+			size += sprintf(buf + size, "OD_RANGE\nSCLK: %10uMhz %10uMhz\n", min, max);
+		}
+		break;
+	case SMU_OD_SCLK:
+			min = (smu->gfx_actual_hard_min_freq > 0) ? smu->gfx_actual_hard_min_freq : smu->gfx_default_hard_min_freq;
+			max = (smu->gfx_actual_soft_max_freq > 0) ? smu->gfx_actual_soft_max_freq : smu->gfx_default_soft_max_freq;
+			size += sprintf(buf + size, "OD_SCLK\n");
+			size += sprintf(buf + size, "0:%10uMhz\n", min);
+			size += sprintf(buf + size, "1:%10uMhz\n", max);
+		break;
 	case SMU_GFXCLK:
 	case SMU_SCLK:
 		/* retirve table returned paramters unit is MHz */
@@ -398,23 +543,35 @@ static int renoir_print_clk_levels(struct smu_context *smu,
 		cur_value = metrics.ClockFrequency[CLOCK_FCLK];
 		break;
 	default:
-		return -EINVAL;
+		break;
 	}
 
-	for (i = 0; i < count; i++) {
-		ret = renoir_get_dpm_clk_limited(smu, clk_type, i, &value);
-		if (ret)
-			return ret;
-		if (!value)
-			continue;
-		size += sprintf(buf + size, "%d: %uMhz %s\n", i, value,
-				cur_value == value ? "*" : "");
-		if (cur_value == value)
-			cur_value_match_level = true;
-	}
+	switch (clk_type) {
+	case SMU_GFXCLK:
+	case SMU_SCLK:
+	case SMU_SOCCLK:
+	case SMU_MCLK:
+	case SMU_DCEFCLK:
+	case SMU_FCLK:
+		for (i = 0; i < count; i++) {
+			ret = renoir_get_dpm_clk_limited(smu, clk_type, i, &value);
+			if (ret)
+				return ret;
+			if (!value)
+				continue;
+			size += sprintf(buf + size, "%d: %uMhz %s\n", i, value,
+					cur_value == value ? "*" : "");
+			if (cur_value == value)
+				cur_value_match_level = true;
+		}
 
-	if (!cur_value_match_level)
-		size += sprintf(buf + size, "   %uMhz *\n", cur_value);
+		if (!cur_value_match_level)
+			size += sprintf(buf + size, "   %uMhz *\n", cur_value);
+
+		break;
+	default:
+		break;
+	}
 
 	return size;
 }
@@ -1159,6 +1316,8 @@ static const struct pptable_funcs renoir_ppt_funcs = {
 	.set_pp_feature_mask = smu_cmn_set_pp_feature_mask,
 	.get_gpu_metrics = renoir_get_gpu_metrics,
 	.gfx_state_change_set = renoir_gfx_state_change_set,
+	.set_fine_grain_gfx_freq_parameters = renoir_set_fine_grain_gfx_freq_parameters,
+	.od_edit_dpm_table = renoir_od_edit_dpm_table,
 };
 
 void renoir_set_ppt_funcs(struct smu_context *smu)