Commit ca6d1b13 authored by Felipe Balbi's avatar Felipe Balbi Committed by Greg Kroah-Hartman

usb: musb: pass configuration specifics via pdata

Use platform_data to pass musb configuration-specific
details to musb driver.

This patch will prevent that other platforms selecting
HAVE_CLK and enabling musb won't break tree building.

The other parts of it will come when linux-omap merge
up more omap2/3 board-files.
Signed-off-by: default avatarFelipe Balbi <felipe.balbi@nokia.com>
Acked-by: default avatarPaul Mundt <lethal@linux-sh.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent f362a475
...@@ -317,7 +317,6 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, ...@@ -317,7 +317,6 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
printk(error, 6, status); printk(error, 6, status);
return -ENODEV; return -ENODEV;
} }
data->multipoint = 1;
tusb_device.dev.platform_data = data; tusb_device.dev.platform_data = data;
/* REVISIT let the driver know what DMA channels work */ /* REVISIT let the driver know what DMA channels work */
......
...@@ -990,12 +990,6 @@ static void musb_shutdown(struct platform_device *pdev) ...@@ -990,12 +990,6 @@ static void musb_shutdown(struct platform_device *pdev)
* We don't currently use dynamic fifo setup capability to do anything * We don't currently use dynamic fifo setup capability to do anything
* more than selecting one of a bunch of predefined configurations. * more than selecting one of a bunch of predefined configurations.
*/ */
#ifdef MUSB_C_DYNFIFO_DEF
#define can_dynfifo() 1
#else
#define can_dynfifo() 0
#endif
#if defined(CONFIG_USB_TUSB6010) || \ #if defined(CONFIG_USB_TUSB6010) || \
defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX) defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
static ushort __initdata fifo_mode = 4; static ushort __initdata fifo_mode = 4;
...@@ -1008,8 +1002,6 @@ module_param(fifo_mode, ushort, 0); ...@@ -1008,8 +1002,6 @@ module_param(fifo_mode, ushort, 0);
MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration"); MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration");
#define DYN_FIFO_SIZE (1<<(MUSB_C_RAM_BITS+2))
enum fifo_style { FIFO_RXTX, FIFO_TX, FIFO_RX } __attribute__ ((packed)); enum fifo_style { FIFO_RXTX, FIFO_TX, FIFO_RX } __attribute__ ((packed));
enum buf_mode { BUF_SINGLE, BUF_DOUBLE } __attribute__ ((packed)); enum buf_mode { BUF_SINGLE, BUF_DOUBLE } __attribute__ ((packed));
...@@ -1119,11 +1111,12 @@ fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep, ...@@ -1119,11 +1111,12 @@ fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep,
c_size = size - 3; c_size = size - 3;
if (cfg->mode == BUF_DOUBLE) { if (cfg->mode == BUF_DOUBLE) {
if ((offset + (maxpacket << 1)) > DYN_FIFO_SIZE) if ((offset + (maxpacket << 1)) >
(1 << (musb->config->ram_bits + 2)))
return -EMSGSIZE; return -EMSGSIZE;
c_size |= MUSB_FIFOSZ_DPB; c_size |= MUSB_FIFOSZ_DPB;
} else { } else {
if ((offset + maxpacket) > DYN_FIFO_SIZE) if ((offset + maxpacket) > (1 << (musb->config->ram_bits + 2)))
return -EMSGSIZE; return -EMSGSIZE;
} }
...@@ -1219,13 +1212,13 @@ static int __init ep_config_from_table(struct musb *musb) ...@@ -1219,13 +1212,13 @@ static int __init ep_config_from_table(struct musb *musb)
/* assert(offset > 0) */ /* assert(offset > 0) */
/* NOTE: for RTL versions >= 1.400 EPINFO and RAMINFO would /* NOTE: for RTL versions >= 1.400 EPINFO and RAMINFO would
* be better than static MUSB_C_NUM_EPS and DYN_FIFO_SIZE... * be better than static musb->config->num_eps and DYN_FIFO_SIZE...
*/ */
for (i = 0; i < n; i++) { for (i = 0; i < n; i++) {
u8 epn = cfg->hw_ep_num; u8 epn = cfg->hw_ep_num;
if (epn >= MUSB_C_NUM_EPS) { if (epn >= musb->config->num_eps) {
pr_debug("%s: invalid ep %d\n", pr_debug("%s: invalid ep %d\n",
musb_driver_name, epn); musb_driver_name, epn);
continue; continue;
...@@ -1242,8 +1235,8 @@ static int __init ep_config_from_table(struct musb *musb) ...@@ -1242,8 +1235,8 @@ static int __init ep_config_from_table(struct musb *musb)
printk(KERN_DEBUG "%s: %d/%d max ep, %d/%d memory\n", printk(KERN_DEBUG "%s: %d/%d max ep, %d/%d memory\n",
musb_driver_name, musb_driver_name,
n + 1, MUSB_C_NUM_EPS * 2 - 1, n + 1, musb->config->num_eps * 2 - 1,
offset, DYN_FIFO_SIZE); offset, (1 << (musb->config->ram_bits + 2)));
#ifdef CONFIG_USB_MUSB_HDRC_HCD #ifdef CONFIG_USB_MUSB_HDRC_HCD
if (!musb->bulk_ep) { if (!musb->bulk_ep) {
...@@ -1270,7 +1263,7 @@ static int __init ep_config_from_hw(struct musb *musb) ...@@ -1270,7 +1263,7 @@ static int __init ep_config_from_hw(struct musb *musb)
/* FIXME pick up ep0 maxpacket size */ /* FIXME pick up ep0 maxpacket size */
for (epnum = 1; epnum < MUSB_C_NUM_EPS; epnum++) { for (epnum = 1; epnum < musb->config->num_eps; epnum++) {
musb_ep_select(mbase, epnum); musb_ep_select(mbase, epnum);
hw_ep = musb->endpoints + epnum; hw_ep = musb->endpoints + epnum;
...@@ -1424,14 +1417,14 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) ...@@ -1424,14 +1417,14 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
musb->epmask = 1; musb->epmask = 1;
if (reg & MUSB_CONFIGDATA_DYNFIFO) { if (reg & MUSB_CONFIGDATA_DYNFIFO) {
if (can_dynfifo()) if (musb->config->dyn_fifo)
status = ep_config_from_table(musb); status = ep_config_from_table(musb);
else { else {
ERR("reconfigure software for Dynamic FIFOs\n"); ERR("reconfigure software for Dynamic FIFOs\n");
status = -ENODEV; status = -ENODEV;
} }
} else { } else {
if (!can_dynfifo()) if (!musb->config->dyn_fifo)
status = ep_config_from_hw(musb); status = ep_config_from_hw(musb);
else { else {
ERR("reconfigure software for static FIFOs\n"); ERR("reconfigure software for static FIFOs\n");
...@@ -1788,7 +1781,8 @@ static void musb_irq_work(struct work_struct *data) ...@@ -1788,7 +1781,8 @@ static void musb_irq_work(struct work_struct *data)
*/ */
static struct musb *__init static struct musb *__init
allocate_instance(struct device *dev, void __iomem *mbase) allocate_instance(struct device *dev,
struct musb_hdrc_config *config, void __iomem *mbase)
{ {
struct musb *musb; struct musb *musb;
struct musb_hw_ep *ep; struct musb_hw_ep *ep;
...@@ -1820,8 +1814,9 @@ allocate_instance(struct device *dev, void __iomem *mbase) ...@@ -1820,8 +1814,9 @@ allocate_instance(struct device *dev, void __iomem *mbase)
musb->mregs = mbase; musb->mregs = mbase;
musb->ctrl_base = mbase; musb->ctrl_base = mbase;
musb->nIrq = -ENODEV; musb->nIrq = -ENODEV;
musb->config = config;
for (epnum = 0, ep = musb->endpoints; for (epnum = 0, ep = musb->endpoints;
epnum < MUSB_C_NUM_EPS; epnum < musb->config->num_eps;
epnum++, ep++) { epnum++, ep++) {
ep->musb = musb; ep->musb = musb;
...@@ -1929,7 +1924,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) ...@@ -1929,7 +1924,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
} }
/* allocate */ /* allocate */
musb = allocate_instance(dev, ctrl); musb = allocate_instance(dev, plat->config, ctrl);
if (!musb) if (!musb)
return -ENOMEM; return -ENOMEM;
...@@ -1987,7 +1982,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) ...@@ -1987,7 +1982,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
musb_generic_disable(musb); musb_generic_disable(musb);
/* setup musb parts of the core (especially endpoints) */ /* setup musb parts of the core (especially endpoints) */
status = musb_core_init(plat->multipoint status = musb_core_init(plat->config->multipoint
? MUSB_CONTROLLER_MHDRC ? MUSB_CONTROLLER_MHDRC
: MUSB_CONTROLLER_HDRC, musb); : MUSB_CONTROLLER_HDRC, musb);
if (status < 0) if (status < 0)
......
...@@ -56,18 +56,6 @@ struct musb_ep; ...@@ -56,18 +56,6 @@ struct musb_ep;
#include "musb_debug.h" #include "musb_debug.h"
#include "musb_dma.h" #include "musb_dma.h"
#ifdef CONFIG_USB_MUSB_SOC
/*
* Get core configuration from a header converted (by cfg_conv)
* from the Verilog config file generated by the core config utility
*
* For now we assume that header is provided along with other
* arch-specific files. Discrete chips will need a build tweak.
* So will using AHB IDs from silicon that provides them.
*/
#include <asm/arch/hdrc_cnf.h>
#endif
#include "musb_io.h" #include "musb_io.h"
#include "musb_regs.h" #include "musb_regs.h"
...@@ -440,6 +428,8 @@ struct musb { ...@@ -440,6 +428,8 @@ struct musb {
struct usb_gadget_driver *gadget_driver; /* its driver */ struct usb_gadget_driver *gadget_driver; /* its driver */
#endif #endif
struct musb_hdrc_config *config;
#ifdef MUSB_CONFIG_PROC_FS #ifdef MUSB_CONFIG_PROC_FS
struct proc_dir_entry *proc_entry; struct proc_dir_entry *proc_entry;
#endif #endif
......
...@@ -230,173 +230,4 @@ extern u8 tusb_get_revision(struct musb *musb); ...@@ -230,173 +230,4 @@ extern u8 tusb_get_revision(struct musb *musb);
#define TUSB_REV_30 0x30 #define TUSB_REV_30 0x30
#define TUSB_REV_31 0x31 #define TUSB_REV_31 0x31
/*----------------------------------------------------------------------------*/
#ifdef CONFIG_USB_TUSB6010
/* configuration parameters specific to this silicon */
/* Number of Tx endpoints. Legal values are 1 - 16 (this value includes EP0) */
#define MUSB_C_NUM_EPT 16
/* Number of Rx endpoints. Legal values are 1 - 16 (this value includes EP0) */
#define MUSB_C_NUM_EPR 16
/* Endpoint 1 to 15 direction types. C_EP1_DEF is defined if either Tx endpoint
* 1 or Rx endpoint 1 are used.
*/
#define MUSB_C_EP1_DEF
/* C_EP1_TX_DEF is defined if Tx endpoint 1 is used */
#define MUSB_C_EP1_TX_DEF
/* C_EP1_RX_DEF is defined if Rx endpoint 1 is used */
#define MUSB_C_EP1_RX_DEF
/* C_EP1_TOR_DEF is defined if Tx endpoint 1 and Rx endpoint 1 share a FIFO */
/* #define C_EP1_TOR_DEF */
/* C_EP1_TAR_DEF is defined if both Tx endpoint 1 and Rx endpoint 1 are used
* and do not share a FIFO.
*/
#define MUSB_C_EP1_TAR_DEF
/* Similarly for all other used endpoints */
#define MUSB_C_EP2_DEF
#define MUSB_C_EP2_TX_DEF
#define MUSB_C_EP2_RX_DEF
#define MUSB_C_EP2_TAR_DEF
#define MUSB_C_EP3_DEF
#define MUSB_C_EP3_TX_DEF
#define MUSB_C_EP3_RX_DEF
#define MUSB_C_EP3_TAR_DEF
#define MUSB_C_EP4_DEF
#define MUSB_C_EP4_TX_DEF
#define MUSB_C_EP4_RX_DEF
#define MUSB_C_EP4_TAR_DEF
/* Endpoint 1 to 15 FIFO address bits. Legal values are 3 to 13 - corresponding
* to FIFO sizes of 8 to 8192 bytes. If an Tx endpoint shares a FIFO with an Rx
* endpoint then the Rx FIFO size must be the same as the Tx FIFO size. All
* endpoints 1 to 15 must be defined, unused endpoints should be set to 2.
*/
#define MUSB_C_EP1T_BITS 5
#define MUSB_C_EP1R_BITS 5
#define MUSB_C_EP2T_BITS 5
#define MUSB_C_EP2R_BITS 5
#define MUSB_C_EP3T_BITS 3
#define MUSB_C_EP3R_BITS 3
#define MUSB_C_EP4T_BITS 3
#define MUSB_C_EP4R_BITS 3
#define MUSB_C_EP5T_BITS 2
#define MUSB_C_EP5R_BITS 2
#define MUSB_C_EP6T_BITS 2
#define MUSB_C_EP6R_BITS 2
#define MUSB_C_EP7T_BITS 2
#define MUSB_C_EP7R_BITS 2
#define MUSB_C_EP8T_BITS 2
#define MUSB_C_EP8R_BITS 2
#define MUSB_C_EP9T_BITS 2
#define MUSB_C_EP9R_BITS 2
#define MUSB_C_EP10T_BITS 2
#define MUSB_C_EP10R_BITS 2
#define MUSB_C_EP11T_BITS 2
#define MUSB_C_EP11R_BITS 2
#define MUSB_C_EP12T_BITS 2
#define MUSB_C_EP12R_BITS 2
#define MUSB_C_EP13T_BITS 2
#define MUSB_C_EP13R_BITS 2
#define MUSB_C_EP14T_BITS 2
#define MUSB_C_EP14R_BITS 2
#define MUSB_C_EP15T_BITS 2
#define MUSB_C_EP15R_BITS 2
/* Define the following constant if the USB2.0 Transceiver Macrocell data width
* is 16-bits.
*/
/* #define C_UTM_16 */
/* Define this constant if the CPU uses big-endian byte ordering. */
/* #define C_BIGEND */
/* Define the following constant if any Tx endpoint is required to support
* multiple bulk packets.
*/
/* #define C_MP_TX */
/* Define the following constant if any Rx endpoint is required to support
* multiple bulk packets.
*/
/* #define C_MP_RX */
/* Define the following constant if any Tx endpoint is required to support high
* bandwidth ISO.
*/
/* #define C_HB_TX */
/* Define the following constant if any Rx endpoint is required to support high
* bandwidth ISO.
*/
/* #define C_HB_RX */
/* Define the following constant if software connect/disconnect control is
* required.
*/
#define MUSB_C_SOFT_CON
/* Define the following constant if Vendor Control Registers are required. */
/* #define C_VEND_REG */
/* Vendor control register widths. */
#define MUSB_C_VCTL_BITS 4
#define MUSB_C_VSTAT_BITS 8
/* Define the following constant to include a DMA controller. */
/* #define C_DMA */
/* Define the following constant if 2 or more DMA channels are required. */
/* #define C_DMA2 */
/* Define the following constant if 3 or more DMA channels are required. */
/* #define C_DMA3 */
/* Define the following constant if 4 or more DMA channels are required. */
/* #define C_DMA4 */
/* Define the following constant if 5 or more DMA channels are required. */
/* #define C_DMA5 */
/* Define the following constant if 6 or more DMA channels are required. */
/* #define C_DMA6 */
/* Define the following constant if 7 or more DMA channels are required. */
/* #define C_DMA7 */
/* Define the following constant if 8 or more DMA channels are required. */
/* #define C_DMA8 */
/* Enable Dynamic FIFO Sizing */
#define MUSB_C_DYNFIFO_DEF
/* Derived constants. The following constants are derived from the previous
* configuration constants
*/
/* Total number of endpoints. Legal values are 2 - 16. This must be equal to
* the larger of C_NUM_EPT, C_NUM_EPR
*/
/* #define MUSB_C_NUM_EPS 5 */
/* C_EPMAX_BITS is equal to the largest endpoint FIFO word address bits */
#define MUSB_C_EPMAX_BITS 11
/* C_RAM_BITS is the number of address bits required to address the RAM (32-bit
* addresses). It is defined as log2 of the sum of 2** of all the endpoint FIFO
* dword address bits (rounded up).
*/
#define MUSB_C_RAM_BITS 12
#endif /* CONFIG_USB_TUSB6010 */
#endif /* __TUSB6010_H__ */ #endif /* __TUSB6010_H__ */
...@@ -19,6 +19,36 @@ enum musb_mode { ...@@ -19,6 +19,36 @@ enum musb_mode {
struct clk; struct clk;
struct musb_hdrc_eps_bits {
const char name[16];
u8 bits;
};
struct musb_hdrc_config {
/* MUSB configuration-specific details */
unsigned multipoint:1; /* multipoint device */
unsigned dyn_fifo:1; /* supports dynamic fifo sizing */
unsigned soft_con:1; /* soft connect required */
unsigned utm_16:1; /* utm data witdh is 16 bits */
unsigned big_endian:1; /* true if CPU uses big-endian */
unsigned mult_bulk_tx:1; /* Tx ep required for multbulk pkts */
unsigned mult_bulk_rx:1; /* Rx ep required for multbulk pkts */
unsigned high_iso_tx:1; /* Tx ep required for HB iso */
unsigned high_iso_rx:1; /* Rx ep required for HD iso */
unsigned dma:1; /* supports DMA */
unsigned vendor_req:1; /* vendor registers required */
u8 num_eps; /* number of endpoints _with_ ep0 */
u8 dma_channels; /* number of dma channels */
u8 dyn_fifo_size; /* dynamic size in bytes */
u8 vendor_ctrl; /* vendor control reg width */
u8 vendor_stat; /* vendor status reg witdh */
u8 dma_req_chan; /* bitmask for required dma channels */
u8 ram_bits; /* ram address size */
struct musb_hdrc_eps_bits *eps_bits;
};
struct musb_hdrc_platform_data { struct musb_hdrc_platform_data {
/* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */ /* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */
u8 mode; u8 mode;
...@@ -38,16 +68,14 @@ struct musb_hdrc_platform_data { ...@@ -38,16 +68,14 @@ struct musb_hdrc_platform_data {
/* (HOST or OTG) msec/2 after VBUS on till power good */ /* (HOST or OTG) msec/2 after VBUS on till power good */
u8 potpgt; u8 potpgt;
/* TBD: chip defaults should probably go someplace else,
* e.g. number of tx/rx endpoints, etc
*/
unsigned multipoint:1;
/* Power the device on or off */ /* Power the device on or off */
int (*set_power)(int state); int (*set_power)(int state);
/* Turn device clock on or off */ /* Turn device clock on or off */
int (*set_clock)(struct clk *clock, int is_on); int (*set_clock)(struct clk *clock, int is_on);
/* MUSB configuration-specific details */
struct musb_hdrc_config *config;
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment