Commit caaa71fa authored by Ansuel Smith's avatar Ansuel Smith Committed by David S. Miller

net: mdio: add ipq8064 mdio driver

Currently ipq806x soc use generic bitbang driver to
comunicate with the gmac ethernet interface.
Add a dedicated driver created by chunkeey to fix this.
Co-developed-by: default avatarChristian Lamparter <chunkeey@gmail.com>
Signed-off-by: default avatarChristian Lamparter <chunkeey@gmail.com>
Signed-off-by: default avatarAnsuel Smith <ansuelsmth@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 425c075d
......@@ -157,6 +157,14 @@ config MDIO_I2C
This is library mode.
config MDIO_IPQ8064
tristate "Qualcomm IPQ8064 MDIO interface support"
depends on HAS_IOMEM && OF_MDIO
depends on MFD_SYSCON
help
This driver supports the MDIO interface found in the network
interface units of the IPQ8064 SoC
config MDIO_MOXART
tristate "MOXA ART MDIO interface support"
depends on ARCH_MOXART || COMPILE_TEST
......
......@@ -37,6 +37,7 @@ obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o
obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o
obj-$(CONFIG_MDIO_IPQ8064) += mdio-ipq8064.o
obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
obj-$(CONFIG_MDIO_MSCC_MIIM) += mdio-mscc-miim.o
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
......
// SPDX-License-Identifier: GPL-2.0
/* Qualcomm IPQ8064 MDIO interface driver
*
* Copyright (C) 2019 Christian Lamparter <chunkeey@gmail.com>
* Copyright (C) 2020 Ansuel Smith <ansuelsmth@gmail.com>
*/
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/of_mdio.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
#include <linux/mfd/syscon.h>
/* MII address register definitions */
#define MII_ADDR_REG_ADDR 0x10
#define MII_BUSY BIT(0)
#define MII_WRITE BIT(1)
#define MII_CLKRANGE_60_100M (0 << 2)
#define MII_CLKRANGE_100_150M (1 << 2)
#define MII_CLKRANGE_20_35M (2 << 2)
#define MII_CLKRANGE_35_60M (3 << 2)
#define MII_CLKRANGE_150_250M (4 << 2)
#define MII_CLKRANGE_250_300M (5 << 2)
#define MII_CLKRANGE_MASK GENMASK(4, 2)
#define MII_REG_SHIFT 6
#define MII_REG_MASK GENMASK(10, 6)
#define MII_ADDR_SHIFT 11
#define MII_ADDR_MASK GENMASK(15, 11)
#define MII_DATA_REG_ADDR 0x14
#define MII_MDIO_DELAY_USEC (1000)
#define MII_MDIO_RETRY_MSEC (10)
struct ipq8064_mdio {
struct regmap *base; /* NSS_GMAC0_BASE */
};
static int
ipq8064_mdio_wait_busy(struct ipq8064_mdio *priv)
{
u32 busy;
return regmap_read_poll_timeout(priv->base, MII_ADDR_REG_ADDR, busy,
!(busy & MII_BUSY), MII_MDIO_DELAY_USEC,
MII_MDIO_RETRY_MSEC * USEC_PER_MSEC);
}
static int
ipq8064_mdio_read(struct mii_bus *bus, int phy_addr, int reg_offset)
{
u32 miiaddr = MII_BUSY | MII_CLKRANGE_250_300M;
struct ipq8064_mdio *priv = bus->priv;
u32 ret_val;
int err;
/* Reject clause 45 */
if (reg_offset & MII_ADDR_C45)
return -EOPNOTSUPP;
miiaddr |= ((phy_addr << MII_ADDR_SHIFT) & MII_ADDR_MASK) |
((reg_offset << MII_REG_SHIFT) & MII_REG_MASK);
regmap_write(priv->base, MII_ADDR_REG_ADDR, miiaddr);
usleep_range(8, 10);
err = ipq8064_mdio_wait_busy(priv);
if (err)
return err;
regmap_read(priv->base, MII_DATA_REG_ADDR, &ret_val);
return (int)ret_val;
}
static int
ipq8064_mdio_write(struct mii_bus *bus, int phy_addr, int reg_offset, u16 data)
{
u32 miiaddr = MII_WRITE | MII_BUSY | MII_CLKRANGE_250_300M;
struct ipq8064_mdio *priv = bus->priv;
/* Reject clause 45 */
if (reg_offset & MII_ADDR_C45)
return -EOPNOTSUPP;
regmap_write(priv->base, MII_DATA_REG_ADDR, data);
miiaddr |= ((phy_addr << MII_ADDR_SHIFT) & MII_ADDR_MASK) |
((reg_offset << MII_REG_SHIFT) & MII_REG_MASK);
regmap_write(priv->base, MII_ADDR_REG_ADDR, miiaddr);
usleep_range(8, 10);
return ipq8064_mdio_wait_busy(priv);
}
static int
ipq8064_mdio_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct ipq8064_mdio *priv;
struct mii_bus *bus;
int ret;
bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*priv));
if (!bus)
return -ENOMEM;
bus->name = "ipq8064_mdio_bus";
bus->read = ipq8064_mdio_read;
bus->write = ipq8064_mdio_write;
snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(&pdev->dev));
bus->parent = &pdev->dev;
priv = bus->priv;
priv->base = device_node_to_regmap(np);
if (IS_ERR(priv->base)) {
if (priv->base == ERR_PTR(-EPROBE_DEFER))
return -EPROBE_DEFER;
dev_err(&pdev->dev, "error getting device regmap, error=%pe\n",
priv->base);
return PTR_ERR(priv->base);
}
ret = of_mdiobus_register(bus, np);
if (ret)
return ret;
platform_set_drvdata(pdev, bus);
return 0;
}
static int
ipq8064_mdio_remove(struct platform_device *pdev)
{
struct mii_bus *bus = platform_get_drvdata(pdev);
mdiobus_unregister(bus);
return 0;
}
static const struct of_device_id ipq8064_mdio_dt_ids[] = {
{ .compatible = "qcom,ipq8064-mdio" },
{ }
};
MODULE_DEVICE_TABLE(of, ipq8064_mdio_dt_ids);
static struct platform_driver ipq8064_mdio_driver = {
.probe = ipq8064_mdio_probe,
.remove = ipq8064_mdio_remove,
.driver = {
.name = "ipq8064-mdio",
.of_match_table = ipq8064_mdio_dt_ids,
},
};
module_platform_driver(ipq8064_mdio_driver);
MODULE_DESCRIPTION("Qualcomm IPQ8064 MDIO interface driver");
MODULE_AUTHOR("Christian Lamparter <chunkeey@gmail.com>");
MODULE_AUTHOR("Ansuel Smith <ansuelsmth@gmail.com>");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment