Commit caba248d authored by Leif Liddy's avatar Leif Liddy Committed by Mark Brown

spi: spi-pxa2xx-pci: Add ID and driver type for WildcatPoint PCH

WildcatPoint PCH as seen on MacBook 12-inch (Early 2015) has a PCI enabled
SPI controller. Enable it by adding its ID to the corresponding driver.
The ACPI enumerated name for this SPI controller (found in spi-pxa2xx.c) is INT33C1.
Therefore, we associate the SPI controller with the corresponding type of LPSS_LPT_SSP.
Signed-off-by: default avatarLeif Liddy <leif.liddy@gmail.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 7c04b792
......@@ -19,6 +19,7 @@ enum {
PORT_BSW1,
PORT_BSW2,
PORT_QUARK_X1000,
PORT_LPT,
};
struct pxa_spi_info {
......@@ -42,6 +43,9 @@ static struct dw_dma_slave bsw1_rx_param = { .src_id = 7 };
static struct dw_dma_slave bsw2_tx_param = { .dst_id = 8 };
static struct dw_dma_slave bsw2_rx_param = { .src_id = 9 };
static struct dw_dma_slave lpt_tx_param = { .dst_id = 0 };
static struct dw_dma_slave lpt_rx_param = { .src_id = 1 };
static bool lpss_dma_filter(struct dma_chan *chan, void *param)
{
struct dw_dma_slave *dws = param;
......@@ -98,6 +102,14 @@ static struct pxa_spi_info spi_info_configs[] = {
.num_chipselect = 1,
.max_clk_rate = 50000000,
},
[PORT_LPT] = {
.type = LPSS_LPT_SSP,
.port_id = 0,
.num_chipselect = 1,
.max_clk_rate = 50000000,
.tx_param = &lpt_tx_param,
.rx_param = &lpt_rx_param,
},
};
static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
......@@ -202,6 +214,7 @@ static const struct pci_device_id pxa2xx_spi_pci_devices[] = {
{ PCI_VDEVICE(INTEL, 0x228e), PORT_BSW0 },
{ PCI_VDEVICE(INTEL, 0x2290), PORT_BSW1 },
{ PCI_VDEVICE(INTEL, 0x22ac), PORT_BSW2 },
{ PCI_VDEVICE(INTEL, 0x9ce6), PORT_LPT },
{ },
};
MODULE_DEVICE_TABLE(pci, pxa2xx_spi_pci_devices);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment