Commit cabe6cc2 authored by Mark Adamson's avatar Mark Adamson Committed by Greg Kroah-Hartman

USB: ftdi_sio: remove support for 5 and 6 data bits

Removed CS5 and CS6 from data bits since these are not supported
in FTDI hardware.
Signed-off-by: default avatarMark J. Adamson <mark.adamson@ftdichip.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 8c4f99cd
...@@ -2246,12 +2246,10 @@ static void ftdi_set_termios(struct tty_struct *tty, ...@@ -2246,12 +2246,10 @@ static void ftdi_set_termios(struct tty_struct *tty,
} }
if (cflag & CSIZE) { if (cflag & CSIZE) {
switch (cflag & CSIZE) { switch (cflag & CSIZE) {
case CS5: urb_value |= 5; dbg("Setting CS5"); break;
case CS6: urb_value |= 6; dbg("Setting CS6"); break;
case CS7: urb_value |= 7; dbg("Setting CS7"); break; case CS7: urb_value |= 7; dbg("Setting CS7"); break;
case CS8: urb_value |= 8; dbg("Setting CS8"); break; case CS8: urb_value |= 8; dbg("Setting CS8"); break;
default: default:
dev_err(&port->dev, "CSIZE was set but not CS5-CS8\n"); dev_err(&port->dev, "CSIZE was set but not CS7-CS8\n");
} }
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment