enic: handle mtu change for vf properly

[ Upstream commit ab123fe0 ]

When driver gets notification for mtu change, driver does not handle it for
all RQs. It handles only RQ[0].

Fix is to use enic_change_mtu() interface to change mtu for vf.
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/net/ethernet/cisco/enic/enic_main.c

@@ -1842,10 +1842,32 @@ static int enic_stop(struct net_device *netdev)
 	return 0;
 }
 
+static int _enic_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	bool running = netif_running(netdev);
+	int err = 0;
+
+	ASSERT_RTNL();
+	if (running) {
+		err = enic_stop(netdev);
+		if (err)
+			return err;
+	}
+
+	netdev->mtu = new_mtu;
+
+	if (running) {
+		err = enic_open(netdev);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
 static int enic_change_mtu(struct net_device *netdev, int new_mtu)
 {
 	struct enic *enic = netdev_priv(netdev);
-	int running = netif_running(netdev);
 
 	if (new_mtu < ENIC_MIN_MTU || new_mtu > ENIC_MAX_MTU)
 		return -EINVAL;
@@ -1853,20 +1875,12 @@ static int enic_change_mtu(struct net_device *netdev, int new_mtu)
 	if (enic_is_dynamic(enic) || enic_is_sriov_vf(enic))
 		return -EOPNOTSUPP;
 
-	if (running)
-		enic_stop(netdev);
-
-	netdev->mtu = new_mtu;
-
 	if (netdev->mtu > enic->port_mtu)
 		netdev_warn(netdev,
-			"interface MTU (%d) set higher than port MTU (%d)\n",
-			netdev->mtu, enic->port_mtu);
+			    "interface MTU (%d) set higher than port MTU (%d)\n",
+			    netdev->mtu, enic->port_mtu);
 
-	if (running)
-		enic_open(netdev);
-
-	return 0;
+	return _enic_change_mtu(netdev, new_mtu);
 }
 
 static void enic_change_mtu_work(struct work_struct *work)
@@ -1874,47 +1888,9 @@ static void enic_change_mtu_work(struct work_struct *work)
 	struct enic *enic = container_of(work, struct enic, change_mtu_work);
 	struct net_device *netdev = enic->netdev;
 	int new_mtu = vnic_dev_mtu(enic->vdev);
-	int err;
-	unsigned int i;
-
-	new_mtu = max_t(int, ENIC_MIN_MTU, min_t(int, ENIC_MAX_MTU, new_mtu));
 
 	rtnl_lock();
-
-	/* Stop RQ */
-	del_timer_sync(&enic->notify_timer);
-
-	for (i = 0; i < enic->rq_count; i++)
-		napi_disable(&enic->napi[i]);
-
-	vnic_intr_mask(&enic->intr[0]);
-	enic_synchronize_irqs(enic);
-	err = vnic_rq_disable(&enic->rq[0]);
-	if (err) {
-		rtnl_unlock();
-		netdev_err(netdev, "Unable to disable RQ.\n");
-		return;
-	}
-	vnic_rq_clean(&enic->rq[0], enic_free_rq_buf);
-	vnic_cq_clean(&enic->cq[0]);
-	vnic_intr_clean(&enic->intr[0]);
-
-	/* Fill RQ with new_mtu-sized buffers */
-	netdev->mtu = new_mtu;
-	vnic_rq_fill(&enic->rq[0], enic_rq_alloc_buf);
-	/* Need at least one buffer on ring to get going */
-	if (vnic_rq_desc_used(&enic->rq[0]) == 0) {
-		rtnl_unlock();
-		netdev_err(netdev, "Unable to alloc receive buffers.\n");
-		return;
-	}
-
-	/* Start RQ */
-	vnic_rq_enable(&enic->rq[0]);
-	napi_enable(&enic->napi[0]);
-	vnic_intr_unmask(&enic->intr[0]);
-	enic_notify_timer_start(enic);
-
+	(void)_enic_change_mtu(netdev, new_mtu);
 	rtnl_unlock();
 
 	netdev_info(netdev, "interface MTU set as %d\n", netdev->mtu);