Commit caeb1aae authored by Dmitry Torokhov's avatar Dmitry Torokhov

Input: bu21013_ts - convert to using managed resources

This allows trimming error unwinding and device removal handling.
Tested-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent a5ee351d
......@@ -137,7 +137,6 @@
/**
* struct bu21013_ts - touch panel data structure
* @client: pointer to the i2c client
* @wait: variable to wait_queue_head_t structure
* @touch_stopped: touch stop flag
* @chip: pointer to the touch panel controller
* @in_dev: pointer to the input device structure
......@@ -149,7 +148,6 @@
*/
struct bu21013_ts {
struct i2c_client *client;
wait_queue_head_t wait;
const struct bu21013_platform_device *chip;
struct input_dev *in_dev;
struct regulator *regulator;
......@@ -242,11 +240,13 @@ static irqreturn_t bu21013_gpio_irq(int irq, void *device_data)
break;
}
if (unlikely(ts->touch_stopped))
break;
keep_polling = gpiod_get_value(ts->int_gpiod);
if (keep_polling)
wait_event_timeout(ts->wait, ts->touch_stopped,
msecs_to_jiffies(2));
} while (keep_polling && !ts->touch_stopped);
usleep_range(2000, 2500);
} while (keep_polling);
return IRQ_HANDLED;
}
......@@ -388,20 +388,6 @@ static int bu21013_init_chip(struct bu21013_ts *ts)
return 0;
}
/**
* bu21013_free_irq() - frees IRQ registered for touchscreen
* @ts: device structure pointer
*
* This function signals interrupt thread to stop processing and
* frees interrupt.
*/
static void bu21013_free_irq(struct bu21013_ts *ts)
{
ts->touch_stopped = true;
wake_up(&ts->wait);
free_irq(ts->irq, ts);
}
#ifdef CONFIG_OF
static const struct bu21013_platform_device *
bu21013_parse_dt(struct device *dev)
......@@ -439,6 +425,20 @@ bu21013_parse_dt(struct device *dev)
}
#endif
static void bu21013_power_off(void *_ts)
{
struct bu21013_ts *ts = _ts;
regulator_disable(ts->regulator);
}
static void bu21013_disable_chip(void *_ts)
{
struct bu21013_ts *ts = _ts;
gpiod_set_value(ts->cs_gpiod, 0);
}
static int bu21013_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
......@@ -460,133 +460,119 @@ static int bu21013_probe(struct i2c_client *client,
return PTR_ERR(pdata);
}
ts = kzalloc(sizeof(*ts), GFP_KERNEL);
in_dev = input_allocate_device();
if (!ts || !in_dev) {
ts = devm_kzalloc(&client->dev, sizeof(*ts), GFP_KERNEL);
if (!ts)
return -ENOMEM;
ts->chip = pdata;
ts->client = client;
in_dev = devm_input_allocate_device(&client->dev);
if (!in_dev) {
dev_err(&client->dev, "device memory alloc failed\n");
error = -ENOMEM;
goto err_free_mem;
return -ENOMEM;
}
ts->in_dev = in_dev;
/* Named "INT" on the chip, DT binding is "touch" */
ts->int_gpiod = gpiod_get(&client->dev, "touch", GPIOD_IN);
error = PTR_ERR_OR_ZERO(ts->int_gpiod);
if (error) {
if (error != -EPROBE_DEFER)
dev_err(&client->dev, "failed to get INT GPIO\n");
goto err_free_mem;
}
gpiod_set_consumer_name(ts->int_gpiod, "BU21013 INT");
/* register the device to input subsystem */
in_dev->name = DRIVER_TP;
in_dev->id.bustype = BUS_I2C;
ts->in_dev = in_dev;
ts->chip = pdata;
ts->client = client;
ts->irq = gpiod_to_irq(ts->int_gpiod);
__set_bit(EV_SYN, in_dev->evbit);
__set_bit(EV_KEY, in_dev->evbit);
__set_bit(EV_ABS, in_dev->evbit);
input_set_abs_params(in_dev, ABS_MT_POSITION_X,
0, pdata->touch_x_max, 0, 0);
input_set_abs_params(in_dev, ABS_MT_POSITION_Y,
0, pdata->touch_y_max, 0, 0);
input_set_drvdata(in_dev, ts);
ts->regulator = regulator_get(&client->dev, "avdd");
ts->regulator = devm_regulator_get(&client->dev, "avdd");
if (IS_ERR(ts->regulator)) {
dev_err(&client->dev, "regulator_get failed\n");
error = PTR_ERR(ts->regulator);
goto err_put_int_gpio;
return PTR_ERR(ts->regulator);
}
error = regulator_enable(ts->regulator);
if (error < 0) {
if (error) {
dev_err(&client->dev, "regulator enable failed\n");
goto err_put_regulator;
return error;
}
ts->touch_stopped = false;
init_waitqueue_head(&ts->wait);
error = devm_add_action_or_reset(&client->dev, bu21013_power_off, ts);
if (error) {
dev_err(&client->dev, "failed to install power off handler\n");
return error;
}
/* Named "CS" on the chip, DT binding is "reset" */
ts->cs_gpiod = gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH);
ts->cs_gpiod = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH);
error = PTR_ERR_OR_ZERO(ts->cs_gpiod);
if (error) {
if (error != -EPROBE_DEFER)
dev_err(&client->dev, "failed to get CS GPIO\n");
goto err_disable_regulator;
return error;
}
gpiod_set_consumer_name(ts->cs_gpiod, "BU21013 CS");
error = devm_add_action_or_reset(&client->dev,
bu21013_disable_chip, ts);
if (error) {
dev_err(&client->dev,
"failed to install chip disable handler\n");
return error;
}
/* Named "INT" on the chip, DT binding is "touch" */
ts->int_gpiod = devm_gpiod_get(&client->dev, "touch", GPIOD_IN);
error = PTR_ERR_OR_ZERO(ts->int_gpiod);
if (error) {
if (error != -EPROBE_DEFER)
dev_err(&client->dev, "failed to get INT GPIO\n");
return error;
}
gpiod_set_consumer_name(ts->int_gpiod, "BU21013 INT");
/* configure the touch panel controller */
error = bu21013_init_chip(ts);
if (error) {
dev_err(&client->dev, "error in bu21013 config\n");
goto err_cs_disable;
return error;
}
/* register the device to input subsystem */
in_dev->name = DRIVER_TP;
in_dev->id.bustype = BUS_I2C;
in_dev->dev.parent = &client->dev;
__set_bit(EV_SYN, in_dev->evbit);
__set_bit(EV_KEY, in_dev->evbit);
__set_bit(EV_ABS, in_dev->evbit);
input_set_abs_params(in_dev, ABS_MT_POSITION_X,
0, pdata->touch_x_max, 0, 0);
input_set_abs_params(in_dev, ABS_MT_POSITION_Y,
0, pdata->touch_y_max, 0, 0);
input_set_drvdata(in_dev, ts);
error = request_threaded_irq(ts->irq, NULL, bu21013_gpio_irq,
IRQF_TRIGGER_FALLING | IRQF_SHARED |
IRQF_ONESHOT,
DRIVER_TP, ts);
ts->irq = gpiod_to_irq(ts->int_gpiod);
error = devm_request_threaded_irq(&client->dev, ts->irq,
NULL, bu21013_gpio_irq,
IRQF_TRIGGER_FALLING |
IRQF_SHARED |
IRQF_ONESHOT,
DRIVER_TP, ts);
if (error) {
dev_err(&client->dev, "request irq %d failed\n",
ts->irq);
goto err_cs_disable;
return error;
}
error = input_register_device(in_dev);
if (error) {
dev_err(&client->dev, "failed to register input device\n");
goto err_free_irq;
return error;
}
device_init_wakeup(&client->dev, pdata->wakeup);
i2c_set_clientdata(client, ts);
return 0;
err_free_irq:
bu21013_free_irq(ts);
err_cs_disable:
gpiod_set_value(ts->cs_gpiod, 0);
gpiod_put(ts->cs_gpiod);
err_disable_regulator:
regulator_disable(ts->regulator);
err_put_regulator:
regulator_put(ts->regulator);
err_put_int_gpio:
gpiod_put(ts->int_gpiod);
err_free_mem:
input_free_device(in_dev);
kfree(ts);
return error;
}
static int bu21013_remove(struct i2c_client *client)
{
struct bu21013_ts *ts = i2c_get_clientdata(client);
bu21013_free_irq(ts);
gpiod_set_value(ts->cs_gpiod, 0);
gpiod_put(ts->cs_gpiod);
input_unregister_device(ts->in_dev);
regulator_disable(ts->regulator);
regulator_put(ts->regulator);
gpiod_put(ts->int_gpiod);
kfree(ts);
/* Make sure IRQ will exit quickly even if there is contact */
ts->touch_stopped = true;
/* The resources will be freed by devm */
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment