Merge tag 'clk-meson-v6.6-1' of https://github.com/BayLibre/clk-meson into clk-amlogic

Pull Amlogic clk driver updates from Jerome Brunet:

 - dt-bindings: expose all Amlogic clock ids
 - Migrate Amlogic gxbb clock controllers dt-bindings to schema

* tag 'clk-meson-v6.6-1' of https://github.com/BayLibre/clk-meson: (22 commits)
  dt-bindings: soc: amlogic: document System Control registers
  dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema
  dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema
  clk: meson: axg-audio: move bindings include to main driver
  clk: meson: meson8b: move bindings include to main driver
  clk: meson: a1: move bindings include to main driver
  clk: meson: eeclk: move bindings include to main driver
  clk: meson: aoclk: move bindings include to main driver
  dt-bindings: clk: axg-audio-clkc: expose all clock ids
  dt-bindings: clk: amlogic,a1-pll-clkc: expose all clock ids
  dt-bindings: clk: amlogic,a1-peripherals-clkc: expose all clock ids
  dt-bindings: clk: meson8b-clkc: expose all clock ids
  dt-bindings: clk: g12a-aoclkc: expose all clock ids
  dt-bindings: clk: g12a-clks: expose all clock ids
  dt-bindings: clk: axg-clkc: expose all clock ids
  dt-bindings: clk: gxbb-clkc: expose all clock ids
  clk: meson: migrate axg-audio out of hw_onecell_data to drop NR_CLKS
  clk: meson: migrate meson8b out of hw_onecell_data to drop NR_CLKS
  clk: meson: migrate a1 clock drivers out of hw_onecell_data to drop NR_CLKS
  clk: meson: migrate meson-aoclk out of hw_onecell_data to drop NR_CLKS
  ...

Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt

-* Amlogic GXBB AO Clock and Reset Unit
-
-The Amlogic GXBB AO clock controller generates and supplies clock to various
-controllers within the Always-On part of the SoC.
-
-Required Properties:
-
-- compatible: value should be different for each SoC family as :
-	- GXBB (S905) : "amlogic,meson-gxbb-aoclkc"
-	- GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc"
-	- GXM (S912) : "amlogic,meson-gxm-aoclkc"
-	- AXG (A113D, A113X) : "amlogic,meson-axg-aoclkc"
-	- G12A (S905X2, S905D2, S905Y2) : "amlogic,meson-g12a-aoclkc"
-	followed by the common "amlogic,meson-gx-aoclkc"
-- clocks: list of clock phandle, one for each entry clock-names.
-- clock-names: should contain the following:
-  * "xtal"     : the platform xtal
-  * "mpeg-clk" : the main clock controller mother clock (aka clk81)
-  * "ext-32k-0"  : external 32kHz reference #0 if any (optional)
-  * "ext-32k-1"  : external 32kHz reference #1 if any (optional - gx only)
-  * "ext-32k-2"  : external 32kHz reference #2 if any (optional - gx only)
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/gxbb-aoclkc.h header and can be
-used in device tree sources.
-
-- #reset-cells: should be 1.
-
-Each reset is assigned an identifier and client nodes can use this identifier
-to specify the reset which they consume. All available resets are defined as
-preprocessor macros in the dt-bindings/reset/gxbb-aoclkc.h header and can be
-used in device tree sources.
-
-Parent node should have the following properties :
-- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"
-- reg: base address and size of the AO system control register space.
-
-Example: AO Clock controller node:
-
-ao_sysctrl: sys-ctrl@0 {
-	compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
-	reg =  <0x0 0x0 0x0 0x100>;
-
-	clkc_AO: clock-controller {
-		compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		clocks = <&xtal>, <&clkc CLKID_CLK81>;
-		clock-names = "xtal", "mpeg-clk";
-	};
-
-Example: UART controller node that consumes the clock and reset generated
-  by the clock controller:
-
-	uart_AO: serial@4c0 {
-		compatible = "amlogic,meson-uart";
-		reg = <0x4c0 0x14>;
-		interrupts = <0 90 1>;
-		clocks = <&clkc_AO CLKID_AO_UART1>;
-		resets = <&clkc_AO RESET_AO_UART1>;
-	};

Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,gxbb-aoclkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Always-On Clock Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,meson-gxbb-aoclkc
+              - amlogic,meson-gxl-aoclkc
+              - amlogic,meson-gxm-aoclkc
+              - amlogic,meson-axg-aoclkc
+          - const: amlogic,meson-gx-aoclkc
+      - enum:
+          - amlogic,meson-axg-aoclkc
+          - amlogic,meson-g12a-aoclkc
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: xtal
+      - const: mpeg-clk
+      - const: ext-32k-0
+      - const: ext-32k-1
+      - const: ext-32k-2
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-g12a-aoclkc
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 3
+
+        clock-names:
+          minItems: 2
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gxl-aoclkc
+            - amlogic,meson-gxm-aoclkc
+            - amlogic,meson-axg-aoclkc
+
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+
+        clock-names:
+          maxItems: 2
+
+additionalProperties: false

Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt

-* Amlogic GXBB Clock and Reset Unit
-
-The Amlogic GXBB clock controller generates and supplies clock to various
-controllers within the SoC.
-
-Required Properties:
-
-- compatible: should be:
-		"amlogic,gxbb-clkc" for GXBB SoC,
-		"amlogic,gxl-clkc" for GXL and GXM SoC,
-		"amlogic,axg-clkc" for AXG SoC.
-		"amlogic,g12a-clkc" for G12A SoC.
-		"amlogic,g12b-clkc" for G12B SoC.
-		"amlogic,sm1-clkc" for SM1 SoC.
-- clocks : list of clock phandle, one for each entry clock-names.
-- clock-names : should contain the following:
-  * "xtal": the platform xtal
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/gxbb-clkc.h header and can be
-used in device tree sources.
-
-Parent node should have the following properties :
-- compatible: "syscon", "simple-mfd, and "amlogic,meson-gx-hhi-sysctrl" or
-              "amlogic,meson-axg-hhi-sysctrl"
-- reg: base address and size of the HHI system control register space.
-
-Example: Clock controller node:
-
-sysctrl: system-controller@0 {
-	compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd";
-	reg = <0 0 0 0x400>;
-
-	clkc: clock-controller {
-		#clock-cells = <1>;
-		compatible = "amlogic,gxbb-clkc";
-		clocks = <&xtal>;
-		clock-names = "xtal";
-	};
-};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart_AO: serial@c81004c0 {
-		compatible = "amlogic,meson-uart";
-		reg = <0xc81004c0 0x14>;
-		interrupts = <0 90 1>;
-		clocks = <&clkc CLKID_CLK81>;
-	};

Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,gxbb-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Clock Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - amlogic,gxbb-clkc
+      - amlogic,gxl-clkc
+      - amlogic,axg-clkc
+      - amlogic,g12a-clkc
+      - amlogic,g12b-clkc
+      - amlogic,sm1-clkc
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xtal
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false

Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson System Control registers
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - amlogic,meson-gx-hhi-sysctrl
+          - amlogic,meson-gx-ao-sysctrl
+          - amlogic,meson-axg-hhi-sysctrl
+          - amlogic,meson-axg-ao-sysctrl
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clock-controller:
+    type: object
+
+  power-controller:
+    $ref: /schemas/power/amlogic,meson-ee-pwrc.yaml
+
+  pinctrl:
+    type: object
+
+  phy:
+    type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gx-hhi-sysctrl
+            - amlogic,meson-axg-hhi-sysctrl
+    then:
+      properties:
+        clock-controller:
+          $ref: /schemas/clock/amlogic,gxbb-clkc.yaml#
+
+      required:
+        - power-controller
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gx-ao-sysctrl
+            - amlogic,meson-axg-ao-sysctrl
+    then:
+      properties:
+        clock-controller:
+          $ref: /schemas/clock/amlogic,gxbb-aoclkc.yaml#
+
+        power-controller: false
+        phy: false
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gx-hhi-sysctrl
+    then:
+      properties:
+        phy: false
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-axg-hhi-sysctrl
+    then:
+      properties:
+        phy:
+          oneOf:
+            - $ref: /schemas/phy/amlogic,g12a-mipi-dphy-analog.yaml
+            - $ref: /schemas/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
+
+required:
+  - compatible
+  - reg
+  - clock-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    bus@c883c000 {
+        compatible = "simple-bus";
+        reg = <0xc883c000 0x2000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0xc883c000 0x2000>;
+
+        sysctrl: system-controller@0 {
+            compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
+            reg = <0 0x400>;
+
+            clock-controller {
+                compatible = "amlogic,gxbb-clkc";
+                #clock-cells = <1>;
+                clocks = <&xtal>;
+                clock-names = "xtal";
+            };
+
+            power-controller {
+                compatible = "amlogic,meson-gxbb-pwrc";
+                #power-domain-cells = <1>;
+                amlogic,ao-sysctrl = <&sysctrl_AO>;
+
+                resets = <&reset_viu>,
+                         <&reset_venc>,
+                         <&reset_vcbus>,
+                         <&reset_bt656>,
+                         <&reset_dvin>,
+                         <&reset_rdma>,
+                         <&reset_venci>,
+                         <&reset_vencp>,
+                         <&reset_vdac>,
+                         <&reset_vdi6>,
+                         <&reset_vencl>,
+                         <&reset_vid_lock>;
+                reset-names = "viu", "venc", "vcbus", "bt656", "dvin",
+                              "rdma", "venci", "vencp", "vdac", "vdi6",
+                              "vencl", "vid_lock";
+                clocks = <&clk_vpu>, <&clk_vapb>;
+                clock-names = "vpu", "vapb";
+            };
+        };
+    };
+
+    bus@c8100000 {
+        compatible = "simple-bus";
+        reg = <0xc8100000 0x100000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0xc8100000 0x100000>;
+
+        sysctrl_AO: system-controller@0 {
+            compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
+            reg = <0 0x100>;
+
+            clock-controller {
+                compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
+                #clock-cells = <1>;
+                #reset-cells = <1>;
+                clocks = <&xtal>, <&clk81>;
+                clock-names = "xtal", "mpeg-clk";
+            };
+        };
+    };

drivers/clk/meson/Kconfig

@@ -30,14 +30,19 @@ config COMMON_CLK_MESON_VID_PLL_DIV
 	tristate
 	select COMMON_CLK_MESON_REGMAP
 
+config COMMON_CLK_MESON_CLKC_UTILS
+	tristate
+
 config COMMON_CLK_MESON_AO_CLKC
 	tristate
 	select COMMON_CLK_MESON_REGMAP
+	select COMMON_CLK_MESON_CLKC_UTILS
 	select RESET_CONTROLLER
 
 config COMMON_CLK_MESON_EE_CLKC
 	tristate
 	select COMMON_CLK_MESON_REGMAP
+	select COMMON_CLK_MESON_CLKC_UTILS
 
 config COMMON_CLK_MESON_CPU_DYNDIV
 	tristate
@@ -48,6 +53,7 @@ config COMMON_CLK_MESON8B
 	depends on ARM
 	default y
 	select COMMON_CLK_MESON_REGMAP
+	select COMMON_CLK_MESON_CLKC_UTILS
 	select COMMON_CLK_MESON_MPLL
 	select COMMON_CLK_MESON_PLL
 	select MFD_SYSCON
@@ -94,6 +100,7 @@ config COMMON_CLK_AXG_AUDIO
 	select COMMON_CLK_MESON_REGMAP
 	select COMMON_CLK_MESON_PHASE
 	select COMMON_CLK_MESON_SCLK_DIV
+	select COMMON_CLK_MESON_CLKC_UTILS
 	select REGMAP_MMIO
 	help
 	  Support for the audio clock controller on AmLogic A113D devices,
@@ -103,6 +110,7 @@ config COMMON_CLK_A1_PLL
 	tristate "Amlogic A1 SoC PLL controller support"
 	depends on ARM64
 	select COMMON_CLK_MESON_REGMAP
+	select COMMON_CLK_MESON_CLKC_UTILS
 	select COMMON_CLK_MESON_PLL
 	help
 	  Support for the PLL clock controller on Amlogic A113L based
@@ -114,6 +122,7 @@ config COMMON_CLK_A1_PERIPHERALS
 	depends on ARM64
 	select COMMON_CLK_MESON_DUALDIV
 	select COMMON_CLK_MESON_REGMAP
+	select COMMON_CLK_MESON_CLKC_UTILS
 	help
 	  Support for the Peripherals clock controller on Amlogic A113L based
 	  device, A1 SoC Family. Say Y if you want A1 Peripherals clock

drivers/clk/meson/Makefile

 # SPDX-License-Identifier: GPL-2.0-only
 # Amlogic clock drivers
 
+obj-$(CONFIG_COMMON_CLK_MESON_CLKC_UTILS) += meson-clkc-utils.o
 obj-$(CONFIG_COMMON_CLK_MESON_AO_CLKC) += meson-aoclk.o
 obj-$(CONFIG_COMMON_CLK_MESON_CPU_DYNDIV) += clk-cpu-dyndiv.o
 obj-$(CONFIG_COMMON_CLK_MESON_DUALDIV) += clk-dualdiv.o

drivers/clk/meson/a1-peripherals.h

@@ -43,71 +43,4 @@
 #define PSRAM_CLK_CTRL		0xf4
 #define DMC_CLK_CTRL		0xf8
 
-/* include the CLKIDs that have been made part of the DT binding */
-#include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
-
-/*
- * CLKID index values for internal clocks
- *
- * These indices are entirely contrived and do not map onto the hardware.
- * It has now been decided to expose everything by default in the DT header:
- * include/dt-bindings/clock/a1-peripherals-clkc.h.
- * Only the clocks ids we don't want to expose, such as the internal muxes and
- * dividers of composite clocks, will remain defined here.
- */
-#define CLKID_XTAL_IN		0
-#define CLKID_DSPA_SEL		61
-#define CLKID_DSPB_SEL		62
-#define CLKID_SARADC_SEL	74
-#define CLKID_SYS_A_SEL		89
-#define CLKID_SYS_A_DIV		90
-#define CLKID_SYS_A		91
-#define CLKID_SYS_B_SEL		92
-#define CLKID_SYS_B_DIV		93
-#define CLKID_SYS_B		94
-#define CLKID_DSPA_A_DIV	96
-#define CLKID_DSPA_A		97
-#define CLKID_DSPA_B_DIV	99
-#define CLKID_DSPA_B		100
-#define CLKID_DSPB_A_DIV	102
-#define CLKID_DSPB_A		103
-#define CLKID_DSPB_B_DIV	105
-#define CLKID_DSPB_B		106
-#define CLKID_RTC_32K_IN	107
-#define CLKID_RTC_32K_DIV	108
-#define CLKID_RTC_32K_XTAL	109
-#define CLKID_RTC_32K_SEL	110
-#define CLKID_CECB_32K_IN	111
-#define CLKID_CECB_32K_DIV	112
-#define CLKID_CECA_32K_IN	115
-#define CLKID_CECA_32K_DIV	116
-#define CLKID_DIV2_PRE		119
-#define CLKID_24M_DIV2		120
-#define CLKID_GEN_DIV		122
-#define CLKID_SARADC_DIV	123
-#define CLKID_PWM_A_DIV		125
-#define CLKID_PWM_B_DIV		127
-#define CLKID_PWM_C_DIV		129
-#define CLKID_PWM_D_DIV		131
-#define CLKID_PWM_E_DIV		133
-#define CLKID_PWM_F_DIV		135
-#define CLKID_SPICC_SEL		136
-#define CLKID_SPICC_DIV		137
-#define CLKID_SPICC_SEL2	138
-#define CLKID_TS_DIV		139
-#define CLKID_SPIFC_SEL		140
-#define CLKID_SPIFC_DIV		141
-#define CLKID_SPIFC_SEL2	142
-#define CLKID_USB_BUS_SEL	143
-#define CLKID_USB_BUS_DIV	144
-#define CLKID_SD_EMMC_SEL	145
-#define CLKID_SD_EMMC_DIV	146
-#define CLKID_PSRAM_SEL		148
-#define CLKID_PSRAM_DIV		149
-#define CLKID_PSRAM_SEL2	150
-#define CLKID_DMC_SEL		151
-#define CLKID_DMC_DIV		152
-#define CLKID_DMC_SEL2		153
-#define NR_CLKS			154
-
 #endif /* __A1_PERIPHERALS_H */

drivers/clk/meson/a1-pll.c

@@ -12,6 +12,9 @@
 #include <linux/platform_device.h>
 #include "a1-pll.h"
 #include "clk-regmap.h"
+#include "meson-clkc-utils.h"
+
+#include <dt-bindings/clock/amlogic,a1-pll-clkc.h>
 
 static struct clk_regmap fixed_pll_dco = {
 	.data = &(struct meson_clk_pll_data){
@@ -268,22 +271,18 @@ static struct clk_regmap fclk_div7 = {
 };
 
 /* Array of all clocks registered by this provider */
-static struct clk_hw_onecell_data a1_pll_clks = {
-	.hws = {
-		[CLKID_FIXED_PLL_DCO]	= &fixed_pll_dco.hw,
-		[CLKID_FIXED_PLL]	= &fixed_pll.hw,
-		[CLKID_FCLK_DIV2_DIV]	= &fclk_div2_div.hw,
-		[CLKID_FCLK_DIV3_DIV]	= &fclk_div3_div.hw,
-		[CLKID_FCLK_DIV5_DIV]	= &fclk_div5_div.hw,
-		[CLKID_FCLK_DIV7_DIV]	= &fclk_div7_div.hw,
-		[CLKID_FCLK_DIV2]	= &fclk_div2.hw,
-		[CLKID_FCLK_DIV3]	= &fclk_div3.hw,
-		[CLKID_FCLK_DIV5]	= &fclk_div5.hw,
-		[CLKID_FCLK_DIV7]	= &fclk_div7.hw,
-		[CLKID_HIFI_PLL]	= &hifi_pll.hw,
-		[NR_PLL_CLKS]		= NULL,
-	},
-	.num = NR_PLL_CLKS,
+static struct clk_hw *a1_pll_hw_clks[] = {
+	[CLKID_FIXED_PLL_DCO]	= &fixed_pll_dco.hw,
+	[CLKID_FIXED_PLL]	= &fixed_pll.hw,
+	[CLKID_FCLK_DIV2_DIV]	= &fclk_div2_div.hw,
+	[CLKID_FCLK_DIV3_DIV]	= &fclk_div3_div.hw,
+	[CLKID_FCLK_DIV5_DIV]	= &fclk_div5_div.hw,
+	[CLKID_FCLK_DIV7_DIV]	= &fclk_div7_div.hw,
+	[CLKID_FCLK_DIV2]	= &fclk_div2.hw,
+	[CLKID_FCLK_DIV3]	= &fclk_div3.hw,
+	[CLKID_FCLK_DIV5]	= &fclk_div5.hw,
+	[CLKID_FCLK_DIV7]	= &fclk_div7.hw,
+	[CLKID_HIFI_PLL]	= &hifi_pll.hw,
 };
 
 static struct clk_regmap *const a1_pll_regmaps[] = {
@@ -302,6 +301,11 @@ static struct regmap_config a1_pll_regmap_cfg = {
 	.reg_stride = 4,
 };
 
+static struct meson_clk_hw_data a1_pll_clks = {
+	.hws = a1_pll_hw_clks,
+	.num = ARRAY_SIZE(a1_pll_hw_clks),
+};
+
 static int meson_a1_pll_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -332,7 +336,7 @@ static int meson_a1_pll_probe(struct platform_device *pdev)
 					     clkid);
 	}
 
-	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+	return devm_of_clk_add_hw_provider(dev, meson_clk_hw_get,
 					   &a1_pll_clks);
 }
 

drivers/clk/meson/a1-pll.h

@@ -25,23 +25,4 @@
 #define ANACTRL_HIFIPLL_CTRL4	0xd0
 #define ANACTRL_HIFIPLL_STS	0xd4
 
-/* include the CLKIDs that have been made part of the DT binding */
-#include <dt-bindings/clock/amlogic,a1-pll-clkc.h>
-
-/*
- * CLKID index values for internal clocks
- *
- * These indices are entirely contrived and do not map onto the hardware.
- * It has now been decided to expose everything by default in the DT header:
- * include/dt-bindings/clock/a1-pll-clkc.h. Only the clocks ids we don't want
- * to expose, such as the internal muxes and dividers of composite clocks,
- * will remain defined here.
- */
-#define CLKID_FIXED_PLL_DCO	0
-#define CLKID_FCLK_DIV2_DIV	2
-#define CLKID_FCLK_DIV3_DIV	3
-#define CLKID_FCLK_DIV5_DIV	4
-#define CLKID_FCLK_DIV7_DIV	5
-#define NR_PLL_CLKS		11
-
 #endif /* __A1_PLL_H */

drivers/clk/meson/axg-aoclk.c

@@ -14,11 +14,13 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include "meson-aoclk.h"
-#include "axg-aoclk.h"
 
 #include "clk-regmap.h"
 #include "clk-dualdiv.h"
 
+#include <dt-bindings/clock/axg-aoclkc.h>
+#include <dt-bindings/reset/axg-aoclkc.h>
+
 /*
  * AO Configuration Clock registers offsets
  * Register offsets from the data sheet must be multiplied by 4.
@@ -288,27 +290,24 @@ static struct clk_regmap *axg_aoclk_regmap[] = {
 	&axg_aoclk_saradc_gate,
 };
 
-static const struct clk_hw_onecell_data axg_aoclk_onecell_data = {
-	.hws = {
-		[CLKID_AO_REMOTE]	= &axg_aoclk_remote.hw,
-		[CLKID_AO_I2C_MASTER]	= &axg_aoclk_i2c_master.hw,
-		[CLKID_AO_I2C_SLAVE]	= &axg_aoclk_i2c_slave.hw,
-		[CLKID_AO_UART1]	= &axg_aoclk_uart1.hw,
-		[CLKID_AO_UART2]	= &axg_aoclk_uart2.hw,
-		[CLKID_AO_IR_BLASTER]	= &axg_aoclk_ir_blaster.hw,
-		[CLKID_AO_SAR_ADC]	= &axg_aoclk_saradc.hw,
-		[CLKID_AO_CLK81]	= &axg_aoclk_clk81.hw,
-		[CLKID_AO_SAR_ADC_SEL]	= &axg_aoclk_saradc_mux.hw,
-		[CLKID_AO_SAR_ADC_DIV]	= &axg_aoclk_saradc_div.hw,
-		[CLKID_AO_SAR_ADC_CLK]	= &axg_aoclk_saradc_gate.hw,
-		[CLKID_AO_CTS_OSCIN]	= &axg_aoclk_cts_oscin.hw,
-		[CLKID_AO_32K_PRE]	= &axg_aoclk_32k_pre.hw,
-		[CLKID_AO_32K_DIV]	= &axg_aoclk_32k_div.hw,
-		[CLKID_AO_32K_SEL]	= &axg_aoclk_32k_sel.hw,
-		[CLKID_AO_32K]		= &axg_aoclk_32k.hw,
-		[CLKID_AO_CTS_RTC_OSCIN] = &axg_aoclk_cts_rtc_oscin.hw,
-	},
-	.num = NR_CLKS,
+static struct clk_hw *axg_aoclk_hw_clks[] = {
+	[CLKID_AO_REMOTE]	= &axg_aoclk_remote.hw,
+	[CLKID_AO_I2C_MASTER]	= &axg_aoclk_i2c_master.hw,
+	[CLKID_AO_I2C_SLAVE]	= &axg_aoclk_i2c_slave.hw,
+	[CLKID_AO_UART1]	= &axg_aoclk_uart1.hw,
+	[CLKID_AO_UART2]	= &axg_aoclk_uart2.hw,
+	[CLKID_AO_IR_BLASTER]	= &axg_aoclk_ir_blaster.hw,
+	[CLKID_AO_SAR_ADC]	= &axg_aoclk_saradc.hw,
+	[CLKID_AO_CLK81]	= &axg_aoclk_clk81.hw,
+	[CLKID_AO_SAR_ADC_SEL]	= &axg_aoclk_saradc_mux.hw,
+	[CLKID_AO_SAR_ADC_DIV]	= &axg_aoclk_saradc_div.hw,
+	[CLKID_AO_SAR_ADC_CLK]	= &axg_aoclk_saradc_gate.hw,
+	[CLKID_AO_CTS_OSCIN]	= &axg_aoclk_cts_oscin.hw,
+	[CLKID_AO_32K_PRE]	= &axg_aoclk_32k_pre.hw,
+	[CLKID_AO_32K_DIV]	= &axg_aoclk_32k_div.hw,
+	[CLKID_AO_32K_SEL]	= &axg_aoclk_32k_sel.hw,
+	[CLKID_AO_32K]		= &axg_aoclk_32k.hw,
+	[CLKID_AO_CTS_RTC_OSCIN] = &axg_aoclk_cts_rtc_oscin.hw,
 };
 
 static const struct meson_aoclk_data axg_aoclkc_data = {
@@ -317,7 +316,10 @@ static const struct meson_aoclk_data axg_aoclkc_data = {
 	.reset		= axg_aoclk_reset,
 	.num_clks	= ARRAY_SIZE(axg_aoclk_regmap),
 	.clks		= axg_aoclk_regmap,
-	.hw_data	= &axg_aoclk_onecell_data,
+	.hw_clks	= {
+		.hws	= axg_aoclk_hw_clks,
+		.num	= ARRAY_SIZE(axg_aoclk_hw_clks),
+	},
 };
 
 static const struct of_device_id axg_aoclkc_match_table[] = {

drivers/clk/meson/axg-aoclk.h

-/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
-/*
- * Copyright (c) 2017 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- *
- * Copyright (c) 2018 Amlogic, inc.
- * Author: Qiufang Dai <qiufang.dai@amlogic.com>
- */
-
-#ifndef __AXG_AOCLKC_H
-#define __AXG_AOCLKC_H
-
-#define NR_CLKS	17
-
-#include <dt-bindings/clock/axg-aoclkc.h>
-#include <dt-bindings/reset/axg-aoclkc.h>
-
-#endif /* __AXG_AOCLKC_H */

drivers/clk/meson/axg-audio.h

@@ -64,80 +64,5 @@
 #define AUDIO_SM1_SW_RESET1	0x02C
 #define AUDIO_CLK81_CTRL	0x030
 #define AUDIO_CLK81_EN		0x034
-/*
- * CLKID index values
- * These indices are entirely contrived and do not map onto the hardware.
- */
-
-#define AUD_CLKID_MST_A_MCLK_SEL	59
-#define AUD_CLKID_MST_B_MCLK_SEL	60
-#define AUD_CLKID_MST_C_MCLK_SEL	61
-#define AUD_CLKID_MST_D_MCLK_SEL	62
-#define AUD_CLKID_MST_E_MCLK_SEL	63
-#define AUD_CLKID_MST_F_MCLK_SEL	64
-#define AUD_CLKID_MST_A_MCLK_DIV	65
-#define AUD_CLKID_MST_B_MCLK_DIV	66
-#define AUD_CLKID_MST_C_MCLK_DIV	67
-#define AUD_CLKID_MST_D_MCLK_DIV	68
-#define AUD_CLKID_MST_E_MCLK_DIV	69
-#define AUD_CLKID_MST_F_MCLK_DIV	70
-#define AUD_CLKID_SPDIFOUT_CLK_SEL	71
-#define AUD_CLKID_SPDIFOUT_CLK_DIV	72
-#define AUD_CLKID_SPDIFIN_CLK_SEL	73
-#define AUD_CLKID_SPDIFIN_CLK_DIV	74
-#define AUD_CLKID_PDM_DCLK_SEL		75
-#define AUD_CLKID_PDM_DCLK_DIV		76
-#define AUD_CLKID_PDM_SYSCLK_SEL	77
-#define AUD_CLKID_PDM_SYSCLK_DIV	78
-#define AUD_CLKID_MST_A_SCLK_PRE_EN	92
-#define AUD_CLKID_MST_B_SCLK_PRE_EN	93
-#define AUD_CLKID_MST_C_SCLK_PRE_EN	94
-#define AUD_CLKID_MST_D_SCLK_PRE_EN	95
-#define AUD_CLKID_MST_E_SCLK_PRE_EN	96
-#define AUD_CLKID_MST_F_SCLK_PRE_EN	97
-#define AUD_CLKID_MST_A_SCLK_DIV	98
-#define AUD_CLKID_MST_B_SCLK_DIV	99
-#define AUD_CLKID_MST_C_SCLK_DIV	100
-#define AUD_CLKID_MST_D_SCLK_DIV	101
-#define AUD_CLKID_MST_E_SCLK_DIV	102
-#define AUD_CLKID_MST_F_SCLK_DIV	103
-#define AUD_CLKID_MST_A_SCLK_POST_EN	104
-#define AUD_CLKID_MST_B_SCLK_POST_EN	105
-#define AUD_CLKID_MST_C_SCLK_POST_EN	106
-#define AUD_CLKID_MST_D_SCLK_POST_EN	107
-#define AUD_CLKID_MST_E_SCLK_POST_EN	108
-#define AUD_CLKID_MST_F_SCLK_POST_EN	109
-#define AUD_CLKID_MST_A_LRCLK_DIV	110
-#define AUD_CLKID_MST_B_LRCLK_DIV	111
-#define AUD_CLKID_MST_C_LRCLK_DIV	112
-#define AUD_CLKID_MST_D_LRCLK_DIV	113
-#define AUD_CLKID_MST_E_LRCLK_DIV	114
-#define AUD_CLKID_MST_F_LRCLK_DIV	115
-#define AUD_CLKID_TDMIN_A_SCLK_PRE_EN	137
-#define AUD_CLKID_TDMIN_B_SCLK_PRE_EN	138
-#define AUD_CLKID_TDMIN_C_SCLK_PRE_EN	139
-#define AUD_CLKID_TDMIN_LB_SCLK_PRE_EN	140
-#define AUD_CLKID_TDMOUT_A_SCLK_PRE_EN	141
-#define AUD_CLKID_TDMOUT_B_SCLK_PRE_EN	142
-#define AUD_CLKID_TDMOUT_C_SCLK_PRE_EN	143
-#define AUD_CLKID_TDMIN_A_SCLK_POST_EN	144
-#define AUD_CLKID_TDMIN_B_SCLK_POST_EN	145
-#define AUD_CLKID_TDMIN_C_SCLK_POST_EN	146
-#define AUD_CLKID_TDMIN_LB_SCLK_POST_EN	147
-#define AUD_CLKID_TDMOUT_A_SCLK_POST_EN	148
-#define AUD_CLKID_TDMOUT_B_SCLK_POST_EN	149
-#define AUD_CLKID_TDMOUT_C_SCLK_POST_EN	150
-#define AUD_CLKID_SPDIFOUT_B_CLK_SEL	153
-#define AUD_CLKID_SPDIFOUT_B_CLK_DIV	154
-#define AUD_CLKID_CLK81_EN		173
-#define AUD_CLKID_SYSCLK_A_DIV		174
-#define AUD_CLKID_SYSCLK_B_DIV		175
-#define AUD_CLKID_SYSCLK_A_EN		176
-#define AUD_CLKID_SYSCLK_B_EN		177
-
-/* include the CLKIDs which are part of the DT bindings */
-#include <dt-bindings/clock/axg-audio-clkc.h>
-
-#define NR_CLKS	178
 
 #endif /*__AXG_AUDIO_CLKC_H */

drivers/clk/meson/axg.h

@@ -102,67 +102,4 @@
 #define HHI_DPLL_TOP_I			0x318
 #define HHI_DPLL_TOP2_I			0x31C
 
-/*
- * CLKID index values
- *
- * These indices are entirely contrived and do not map onto the hardware.
- * It has now been decided to expose everything by default in the DT header:
- * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want
- * to expose, such as the internal muxes and dividers of composite clocks,
- * will remain defined here.
- */
-#define CLKID_MPEG_SEL				8
-#define CLKID_MPEG_DIV				9
-#define CLKID_SD_EMMC_B_CLK0_SEL		61
-#define CLKID_SD_EMMC_B_CLK0_DIV		62
-#define CLKID_SD_EMMC_C_CLK0_SEL		63
-#define CLKID_SD_EMMC_C_CLK0_DIV		64
-#define CLKID_MPLL0_DIV				65
-#define CLKID_MPLL1_DIV				66
-#define CLKID_MPLL2_DIV				67
-#define CLKID_MPLL3_DIV				68
-#define CLKID_MPLL_PREDIV			70
-#define CLKID_FCLK_DIV2_DIV			71
-#define CLKID_FCLK_DIV3_DIV			72
-#define CLKID_FCLK_DIV4_DIV			73
-#define CLKID_FCLK_DIV5_DIV			74
-#define CLKID_FCLK_DIV7_DIV			75
-#define CLKID_PCIE_PLL				76
-#define CLKID_PCIE_MUX				77
-#define CLKID_PCIE_REF				78
-#define CLKID_GEN_CLK_SEL			82
-#define CLKID_GEN_CLK_DIV			83
-#define CLKID_SYS_PLL_DCO			85
-#define CLKID_FIXED_PLL_DCO			86
-#define CLKID_GP0_PLL_DCO			87
-#define CLKID_HIFI_PLL_DCO			88
-#define CLKID_PCIE_PLL_DCO			89
-#define CLKID_PCIE_PLL_OD			90
-#define CLKID_VPU_0_DIV				91
-#define CLKID_VPU_1_DIV				94
-#define CLKID_VAPB_0_DIV			98
-#define CLKID_VAPB_1_DIV			101
-#define CLKID_VCLK_SEL				108
-#define CLKID_VCLK2_SEL				109
-#define CLKID_VCLK_INPUT			110
-#define CLKID_VCLK2_INPUT			111
-#define CLKID_VCLK_DIV				112
-#define CLKID_VCLK2_DIV				113
-#define CLKID_VCLK_DIV2_EN			114
-#define CLKID_VCLK_DIV4_EN			115
-#define CLKID_VCLK_DIV6_EN			116
-#define CLKID_VCLK_DIV12_EN			117
-#define CLKID_VCLK2_DIV2_EN			118
-#define CLKID_VCLK2_DIV4_EN			119
-#define CLKID_VCLK2_DIV6_EN			120
-#define CLKID_VCLK2_DIV12_EN			121
-#define CLKID_CTS_ENCL_SEL			132
-#define CLKID_VDIN_MEAS_SEL			134
-#define CLKID_VDIN_MEAS_DIV			135
-
-#define NR_CLKS					137
-
-/* include the CLKIDs that have been made part of the DT binding */
-#include <dt-bindings/clock/axg-clkc.h>
-
 #endif /* __AXG_H */

drivers/clk/meson/g12a-aoclk.c

@@ -14,11 +14,13 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include "meson-aoclk.h"
-#include "g12a-aoclk.h"
 
 #include "clk-regmap.h"
 #include "clk-dualdiv.h"
 
+#include <dt-bindings/clock/g12a-aoclkc.h>
+#include <dt-bindings/reset/g12a-aoclkc.h>
+
 /*
  * AO Configuration Clock registers offsets
  * Register offsets from the data sheet must be multiplied by 4.
@@ -411,39 +413,36 @@ static struct clk_regmap *g12a_aoclk_regmap[] = {
 	&g12a_aoclk_saradc_gate,
 };
 
-static const struct clk_hw_onecell_data g12a_aoclk_onecell_data = {
-	.hws = {
-		[CLKID_AO_AHB]		= &g12a_aoclk_ahb.hw,
-		[CLKID_AO_IR_IN]	= &g12a_aoclk_ir_in.hw,
-		[CLKID_AO_I2C_M0]	= &g12a_aoclk_i2c_m0.hw,
-		[CLKID_AO_I2C_S0]	= &g12a_aoclk_i2c_s0.hw,
-		[CLKID_AO_UART]		= &g12a_aoclk_uart.hw,
-		[CLKID_AO_PROD_I2C]	= &g12a_aoclk_prod_i2c.hw,
-		[CLKID_AO_UART2]	= &g12a_aoclk_uart2.hw,
-		[CLKID_AO_IR_OUT]	= &g12a_aoclk_ir_out.hw,
-		[CLKID_AO_SAR_ADC]	= &g12a_aoclk_saradc.hw,
-		[CLKID_AO_MAILBOX]	= &g12a_aoclk_mailbox.hw,
-		[CLKID_AO_M3]		= &g12a_aoclk_m3.hw,
-		[CLKID_AO_AHB_SRAM]	= &g12a_aoclk_ahb_sram.hw,
-		[CLKID_AO_RTI]		= &g12a_aoclk_rti.hw,
-		[CLKID_AO_M4_FCLK]	= &g12a_aoclk_m4_fclk.hw,
-		[CLKID_AO_M4_HCLK]	= &g12a_aoclk_m4_hclk.hw,
-		[CLKID_AO_CLK81]	= &g12a_aoclk_clk81.hw,
-		[CLKID_AO_SAR_ADC_SEL]	= &g12a_aoclk_saradc_mux.hw,
-		[CLKID_AO_SAR_ADC_DIV]	= &g12a_aoclk_saradc_div.hw,
-		[CLKID_AO_SAR_ADC_CLK]	= &g12a_aoclk_saradc_gate.hw,
-		[CLKID_AO_CTS_OSCIN]	= &g12a_aoclk_cts_oscin.hw,
-		[CLKID_AO_32K_PRE]	= &g12a_aoclk_32k_by_oscin_pre.hw,
-		[CLKID_AO_32K_DIV]	= &g12a_aoclk_32k_by_oscin_div.hw,
-		[CLKID_AO_32K_SEL]	= &g12a_aoclk_32k_by_oscin_sel.hw,
-		[CLKID_AO_32K]		= &g12a_aoclk_32k_by_oscin.hw,
-		[CLKID_AO_CEC_PRE]	= &g12a_aoclk_cec_pre.hw,
-		[CLKID_AO_CEC_DIV]	= &g12a_aoclk_cec_div.hw,
-		[CLKID_AO_CEC_SEL]	= &g12a_aoclk_cec_sel.hw,
-		[CLKID_AO_CEC]		= &g12a_aoclk_cec.hw,
-		[CLKID_AO_CTS_RTC_OSCIN] = &g12a_aoclk_cts_rtc_oscin.hw,
-	},
-	.num = NR_CLKS,
+static struct clk_hw *g12a_aoclk_hw_clks[] = {
+	[CLKID_AO_AHB]		= &g12a_aoclk_ahb.hw,
+	[CLKID_AO_IR_IN]	= &g12a_aoclk_ir_in.hw,
+	[CLKID_AO_I2C_M0]	= &g12a_aoclk_i2c_m0.hw,
+	[CLKID_AO_I2C_S0]	= &g12a_aoclk_i2c_s0.hw,
+	[CLKID_AO_UART]		= &g12a_aoclk_uart.hw,
+	[CLKID_AO_PROD_I2C]	= &g12a_aoclk_prod_i2c.hw,
+	[CLKID_AO_UART2]	= &g12a_aoclk_uart2.hw,
+	[CLKID_AO_IR_OUT]	= &g12a_aoclk_ir_out.hw,
+	[CLKID_AO_SAR_ADC]	= &g12a_aoclk_saradc.hw,
+	[CLKID_AO_MAILBOX]	= &g12a_aoclk_mailbox.hw,
+	[CLKID_AO_M3]		= &g12a_aoclk_m3.hw,
+	[CLKID_AO_AHB_SRAM]	= &g12a_aoclk_ahb_sram.hw,
+	[CLKID_AO_RTI]		= &g12a_aoclk_rti.hw,
+	[CLKID_AO_M4_FCLK]	= &g12a_aoclk_m4_fclk.hw,
+	[CLKID_AO_M4_HCLK]	= &g12a_aoclk_m4_hclk.hw,
+	[CLKID_AO_CLK81]	= &g12a_aoclk_clk81.hw,
+	[CLKID_AO_SAR_ADC_SEL]	= &g12a_aoclk_saradc_mux.hw,
+	[CLKID_AO_SAR_ADC_DIV]	= &g12a_aoclk_saradc_div.hw,
+	[CLKID_AO_SAR_ADC_CLK]	= &g12a_aoclk_saradc_gate.hw,
+	[CLKID_AO_CTS_OSCIN]	= &g12a_aoclk_cts_oscin.hw,
+	[CLKID_AO_32K_PRE]	= &g12a_aoclk_32k_by_oscin_pre.hw,
+	[CLKID_AO_32K_DIV]	= &g12a_aoclk_32k_by_oscin_div.hw,
+	[CLKID_AO_32K_SEL]	= &g12a_aoclk_32k_by_oscin_sel.hw,
+	[CLKID_AO_32K]		= &g12a_aoclk_32k_by_oscin.hw,
+	[CLKID_AO_CEC_PRE]	= &g12a_aoclk_cec_pre.hw,
+	[CLKID_AO_CEC_DIV]	= &g12a_aoclk_cec_div.hw,
+	[CLKID_AO_CEC_SEL]	= &g12a_aoclk_cec_sel.hw,
+	[CLKID_AO_CEC]		= &g12a_aoclk_cec.hw,
+	[CLKID_AO_CTS_RTC_OSCIN] = &g12a_aoclk_cts_rtc_oscin.hw,
 };
 
 static const struct meson_aoclk_data g12a_aoclkc_data = {
@@ -452,7 +451,10 @@ static const struct meson_aoclk_data g12a_aoclkc_data = {
 	.reset		= g12a_aoclk_reset,
 	.num_clks	= ARRAY_SIZE(g12a_aoclk_regmap),
 	.clks		= g12a_aoclk_regmap,
-	.hw_data	= &g12a_aoclk_onecell_data,
+	.hw_clks	= {
+		.hws	= g12a_aoclk_hw_clks,
+		.num	= ARRAY_SIZE(g12a_aoclk_hw_clks),
+	},
 };
 
 static const struct of_device_id g12a_aoclkc_match_table[] = {

drivers/clk/meson/g12a-aoclk.h

-/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
-/*
- * Copyright (c) 2019 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#ifndef __G12A_AOCLKC_H
-#define __G12A_AOCLKC_H
-
-/*
- * CLKID index values
- *
- * These indices are entirely contrived and do not map onto the hardware.
- * It has now been decided to expose everything by default in the DT header:
- * include/dt-bindings/clock/g12a-aoclkc.h. Only the clocks ids we don't want
- * to expose, such as the internal muxes and dividers of composite clocks,
- * will remain defined here.
- */
-#define CLKID_AO_SAR_ADC_DIV	17
-#define CLKID_AO_32K_PRE	20
-#define CLKID_AO_32K_DIV	21
-#define CLKID_AO_32K_SEL	22
-#define CLKID_AO_CEC_PRE	24
-#define CLKID_AO_CEC_DIV	25
-#define CLKID_AO_CEC_SEL	26
-
-#define NR_CLKS	29
-
-#include <dt-bindings/clock/g12a-aoclkc.h>
-#include <dt-bindings/reset/g12a-aoclkc.h>
-
-#endif /* __G12A_AOCLKC_H */

drivers/clk/meson/g12a.h

@@ -126,149 +126,4 @@
 #define HHI_SYS1_PLL_CNTL5		0x394
 #define HHI_SYS1_PLL_CNTL6		0x398
 
-/*
- * CLKID index values
- *
- * These indices are entirely contrived and do not map onto the hardware.
- * It has now been decided to expose everything by default in the DT header:
- * include/dt-bindings/clock/g12a-clkc.h. Only the clocks ids we don't want
- * to expose, such as the internal muxes and dividers of composite clocks,
- * will remain defined here.
- */
-#define CLKID_MPEG_SEL				8
-#define CLKID_MPEG_DIV				9
-#define CLKID_SD_EMMC_A_CLK0_SEL		63
-#define CLKID_SD_EMMC_A_CLK0_DIV		64
-#define CLKID_SD_EMMC_B_CLK0_SEL		65
-#define CLKID_SD_EMMC_B_CLK0_DIV		66
-#define CLKID_SD_EMMC_C_CLK0_SEL		67
-#define CLKID_SD_EMMC_C_CLK0_DIV		68
-#define CLKID_MPLL0_DIV				69
-#define CLKID_MPLL1_DIV				70
-#define CLKID_MPLL2_DIV				71
-#define CLKID_MPLL3_DIV				72
-#define CLKID_MPLL_PREDIV			73
-#define CLKID_FCLK_DIV2_DIV			75
-#define CLKID_FCLK_DIV3_DIV			76
-#define CLKID_FCLK_DIV4_DIV			77
-#define CLKID_FCLK_DIV5_DIV			78
-#define CLKID_FCLK_DIV7_DIV			79
-#define CLKID_FCLK_DIV2P5_DIV			100
-#define CLKID_FIXED_PLL_DCO			101
-#define CLKID_SYS_PLL_DCO			102
-#define CLKID_GP0_PLL_DCO			103
-#define CLKID_HIFI_PLL_DCO			104
-#define CLKID_VPU_0_DIV				111
-#define CLKID_VPU_1_DIV				114
-#define CLKID_VAPB_0_DIV			118
-#define CLKID_VAPB_1_DIV			121
-#define CLKID_HDMI_PLL_DCO			125
-#define CLKID_HDMI_PLL_OD			126
-#define CLKID_HDMI_PLL_OD2			127
-#define CLKID_VID_PLL_SEL			130
-#define CLKID_VID_PLL_DIV			131
-#define CLKID_VCLK_SEL				132
-#define CLKID_VCLK2_SEL				133
-#define CLKID_VCLK_INPUT			134
-#define CLKID_VCLK2_INPUT			135
-#define CLKID_VCLK_DIV				136
-#define CLKID_VCLK2_DIV				137
-#define CLKID_VCLK_DIV2_EN			140
-#define CLKID_VCLK_DIV4_EN			141
-#define CLKID_VCLK_DIV6_EN			142
-#define CLKID_VCLK_DIV12_EN			143
-#define CLKID_VCLK2_DIV2_EN			144
-#define CLKID_VCLK2_DIV4_EN			145
-#define CLKID_VCLK2_DIV6_EN			146
-#define CLKID_VCLK2_DIV12_EN			147
-#define CLKID_CTS_ENCI_SEL			158
-#define CLKID_CTS_ENCP_SEL			159
-#define CLKID_CTS_VDAC_SEL			160
-#define CLKID_HDMI_TX_SEL			161
-#define CLKID_HDMI_SEL				166
-#define CLKID_HDMI_DIV				167
-#define CLKID_MALI_0_DIV			170
-#define CLKID_MALI_1_DIV			173
-#define CLKID_MPLL_50M_DIV			176
-#define CLKID_SYS_PLL_DIV16_EN			178
-#define CLKID_SYS_PLL_DIV16			179
-#define CLKID_CPU_CLK_DYN0_SEL			180
-#define CLKID_CPU_CLK_DYN0_DIV			181
-#define CLKID_CPU_CLK_DYN0			182
-#define CLKID_CPU_CLK_DYN1_SEL			183
-#define CLKID_CPU_CLK_DYN1_DIV			184
-#define CLKID_CPU_CLK_DYN1			185
-#define CLKID_CPU_CLK_DYN			186
-#define CLKID_CPU_CLK_DIV16_EN			188
-#define CLKID_CPU_CLK_DIV16			189
-#define CLKID_CPU_CLK_APB_DIV			190
-#define CLKID_CPU_CLK_APB			191
-#define CLKID_CPU_CLK_ATB_DIV			192
-#define CLKID_CPU_CLK_ATB			193
-#define CLKID_CPU_CLK_AXI_DIV			194
-#define CLKID_CPU_CLK_AXI			195
-#define CLKID_CPU_CLK_TRACE_DIV			196
-#define CLKID_CPU_CLK_TRACE			197
-#define CLKID_PCIE_PLL_DCO			198
-#define CLKID_PCIE_PLL_DCO_DIV2			199
-#define CLKID_PCIE_PLL_OD			200
-#define CLKID_VDEC_1_SEL			202
-#define CLKID_VDEC_1_DIV			203
-#define CLKID_VDEC_HEVC_SEL			205
-#define CLKID_VDEC_HEVC_DIV			206
-#define CLKID_VDEC_HEVCF_SEL			208
-#define CLKID_VDEC_HEVCF_DIV			209
-#define CLKID_TS_DIV				211
-#define CLKID_SYS1_PLL_DCO			213
-#define CLKID_SYS1_PLL				214
-#define CLKID_SYS1_PLL_DIV16_EN			215
-#define CLKID_SYS1_PLL_DIV16			216
-#define CLKID_CPUB_CLK_DYN0_SEL			217
-#define CLKID_CPUB_CLK_DYN0_DIV			218
-#define CLKID_CPUB_CLK_DYN0			219
-#define CLKID_CPUB_CLK_DYN1_SEL			220
-#define CLKID_CPUB_CLK_DYN1_DIV			221
-#define CLKID_CPUB_CLK_DYN1			222
-#define CLKID_CPUB_CLK_DYN			223
-#define CLKID_CPUB_CLK_DIV16_EN			225
-#define CLKID_CPUB_CLK_DIV16			226
-#define CLKID_CPUB_CLK_DIV2			227
-#define CLKID_CPUB_CLK_DIV3			228
-#define CLKID_CPUB_CLK_DIV4			229
-#define CLKID_CPUB_CLK_DIV5			230
-#define CLKID_CPUB_CLK_DIV6			231
-#define CLKID_CPUB_CLK_DIV7			232
-#define CLKID_CPUB_CLK_DIV8			233
-#define CLKID_CPUB_CLK_APB_SEL			234
-#define CLKID_CPUB_CLK_APB			235
-#define CLKID_CPUB_CLK_ATB_SEL			236
-#define CLKID_CPUB_CLK_ATB			237
-#define CLKID_CPUB_CLK_AXI_SEL			238
-#define CLKID_CPUB_CLK_AXI			239
-#define CLKID_CPUB_CLK_TRACE_SEL		240
-#define CLKID_CPUB_CLK_TRACE			241
-#define CLKID_GP1_PLL_DCO			242
-#define CLKID_DSU_CLK_DYN0_SEL			244
-#define CLKID_DSU_CLK_DYN0_DIV			245
-#define CLKID_DSU_CLK_DYN0			246
-#define CLKID_DSU_CLK_DYN1_SEL			247
-#define CLKID_DSU_CLK_DYN1_DIV			248
-#define CLKID_DSU_CLK_DYN1			249
-#define CLKID_DSU_CLK_DYN			250
-#define CLKID_DSU_CLK_FINAL			251
-#define CLKID_SPICC0_SCLK_SEL			256
-#define CLKID_SPICC0_SCLK_DIV			257
-#define CLKID_SPICC1_SCLK_SEL			259
-#define CLKID_SPICC1_SCLK_DIV			260
-#define CLKID_NNA_AXI_CLK_SEL			262
-#define CLKID_NNA_AXI_CLK_DIV			263
-#define CLKID_NNA_CORE_CLK_SEL			265
-#define CLKID_NNA_CORE_CLK_DIV			266
-#define CLKID_MIPI_DSI_PXCLK_DIV		268
-
-#define NR_CLKS					271
-
-/* include the CLKIDs that have been made part of the DT binding */
-#include <dt-bindings/clock/g12a-clkc.h>
-
 #endif /* __G12A_H */

drivers/clk/meson/gxbb-aoclk.c

@@ -7,11 +7,13 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include "meson-aoclk.h"
-#include "gxbb-aoclk.h"
 
 #include "clk-regmap.h"
 #include "clk-dualdiv.h"
 
+#include <dt-bindings/clock/gxbb-aoclkc.h>
+#include <dt-bindings/reset/gxbb-aoclkc.h>
+
 /* AO Configuration Clock registers offsets */
 #define AO_RTI_PWR_CNTL_REG1	0x0c
 #define AO_RTI_PWR_CNTL_REG0	0x10
@@ -252,8 +254,7 @@ static struct clk_regmap *gxbb_aoclk[] = {
 	&ao_cts_cec,
 };
 
-static const struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
-	.hws = {
+static struct clk_hw *gxbb_aoclk_hw_clks[] = {
 		[CLKID_AO_REMOTE] = &remote_ao.hw,
 		[CLKID_AO_I2C_MASTER] = &i2c_master_ao.hw,
 		[CLKID_AO_I2C_SLAVE] = &i2c_slave_ao.hw,
@@ -268,8 +269,6 @@ static const struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
 		[CLKID_AO_32K] = &ao_32k.hw,
 		[CLKID_AO_CTS_RTC_OSCIN] = &ao_cts_rtc_oscin.hw,
 		[CLKID_AO_CLK81] = &ao_clk81.hw,
-	},
-	.num = NR_CLKS,
 };
 
 static const struct meson_aoclk_data gxbb_aoclkc_data = {
@@ -278,7 +277,10 @@ static const struct meson_aoclk_data gxbb_aoclkc_data = {
 	.reset		= gxbb_aoclk_reset,
 	.num_clks	= ARRAY_SIZE(gxbb_aoclk),
 	.clks		= gxbb_aoclk,
-	.hw_data	= &gxbb_aoclk_onecell_data,
+	.hw_clks	= {
+		.hws	= gxbb_aoclk_hw_clks,
+		.num	= ARRAY_SIZE(gxbb_aoclk_hw_clks),
+	},
 };
 
 static const struct of_device_id gxbb_aoclkc_match_table[] = {

drivers/clk/meson/gxbb-aoclk.h

-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (c) 2017 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#ifndef __GXBB_AOCLKC_H
-#define __GXBB_AOCLKC_H
-
-#define NR_CLKS	14
-
-#include <dt-bindings/clock/gxbb-aoclkc.h>
-#include <dt-bindings/reset/gxbb-aoclkc.h>
-
-#endif /* __GXBB_AOCLKC_H */

drivers/clk/meson/gxbb.h

@@ -112,85 +112,4 @@
 #define HHI_BT656_CLK_CNTL		0x3D4 /* 0xf5 offset in data sheet */
 #define HHI_SAR_CLK_CNTL		0x3D8 /* 0xf6 offset in data sheet */
 
-/*
- * CLKID index values
- *
- * These indices are entirely contrived and do not map onto the hardware.
- * It has now been decided to expose everything by default in the DT header:
- * include/dt-bindings/clock/gxbb-clkc.h. Only the clocks ids we don't want
- * to expose, such as the internal muxes and dividers of composite clocks,
- * will remain defined here.
- */
-/* ID 1 is unused (it was used by the non-existing CLKID_CPUCLK before) */
-#define CLKID_MPEG_SEL		  10
-#define CLKID_MPEG_DIV		  11
-#define CLKID_SAR_ADC_DIV	  99
-#define CLKID_MALI_0_DIV	  101
-#define CLKID_MALI_1_DIV	  104
-#define CLKID_CTS_AMCLK_SEL	  108
-#define CLKID_CTS_AMCLK_DIV	  109
-#define CLKID_CTS_MCLK_I958_SEL	  111
-#define CLKID_CTS_MCLK_I958_DIV	  112
-#define CLKID_32K_CLK_SEL	  115
-#define CLKID_32K_CLK_DIV	  116
-#define CLKID_SD_EMMC_A_CLK0_SEL  117
-#define CLKID_SD_EMMC_A_CLK0_DIV  118
-#define CLKID_SD_EMMC_B_CLK0_SEL  120
-#define CLKID_SD_EMMC_B_CLK0_DIV  121
-#define CLKID_SD_EMMC_C_CLK0_SEL  123
-#define CLKID_SD_EMMC_C_CLK0_DIV  124
-#define CLKID_VPU_0_DIV		  127
-#define CLKID_VPU_1_DIV		  130
-#define CLKID_VAPB_0_DIV	  134
-#define CLKID_VAPB_1_DIV	  137
-#define CLKID_HDMI_PLL_PRE_MULT	  141
-#define CLKID_MPLL0_DIV		  142
-#define CLKID_MPLL1_DIV		  143
-#define CLKID_MPLL2_DIV		  144
-#define CLKID_MPLL_PREDIV	  145
-#define CLKID_FCLK_DIV2_DIV	  146
-#define CLKID_FCLK_DIV3_DIV	  147
-#define CLKID_FCLK_DIV4_DIV	  148
-#define CLKID_FCLK_DIV5_DIV	  149
-#define CLKID_FCLK_DIV7_DIV	  150
-#define CLKID_VDEC_1_SEL	  151
-#define CLKID_VDEC_1_DIV	  152
-#define CLKID_VDEC_HEVC_SEL	  154
-#define CLKID_VDEC_HEVC_DIV	  155
-#define CLKID_GEN_CLK_SEL	  157
-#define CLKID_GEN_CLK_DIV	  158
-#define CLKID_FIXED_PLL_DCO	  160
-#define CLKID_HDMI_PLL_DCO	  161
-#define CLKID_HDMI_PLL_OD	  162
-#define CLKID_HDMI_PLL_OD2	  163
-#define CLKID_SYS_PLL_DCO	  164
-#define CLKID_GP0_PLL_DCO	  165
-#define CLKID_VID_PLL_SEL	  167
-#define CLKID_VID_PLL_DIV	  168
-#define CLKID_VCLK_SEL		  169
-#define CLKID_VCLK2_SEL		  170
-#define CLKID_VCLK_INPUT	  171
-#define CLKID_VCLK2_INPUT	  172
-#define CLKID_VCLK_DIV		  173
-#define CLKID_VCLK2_DIV		  174
-#define CLKID_VCLK_DIV2_EN	  177
-#define CLKID_VCLK_DIV4_EN	  178
-#define CLKID_VCLK_DIV6_EN	  179
-#define CLKID_VCLK_DIV12_EN	  180
-#define CLKID_VCLK2_DIV2_EN	  181
-#define CLKID_VCLK2_DIV4_EN	  182
-#define CLKID_VCLK2_DIV6_EN	  183
-#define CLKID_VCLK2_DIV12_EN	  184
-#define CLKID_CTS_ENCI_SEL	  195
-#define CLKID_CTS_ENCP_SEL	  196
-#define CLKID_CTS_VDAC_SEL	  197
-#define CLKID_HDMI_TX_SEL	  198
-#define CLKID_HDMI_SEL		  203
-#define CLKID_HDMI_DIV		  204
-
-#define NR_CLKS			  207
-
-/* include the CLKIDs that have been made part of the DT binding */
-#include <dt-bindings/clock/gxbb-clkc.h>
-
 #endif /* __GXBB_H */

drivers/clk/meson/meson-aoclk.c

@@ -75,19 +75,18 @@ int meson_aoclkc_probe(struct platform_device *pdev)
 		data->clks[clkid]->map = regmap;
 
 	/* Register all clks */
-	for (clkid = 0; clkid < data->hw_data->num; clkid++) {
-		if (!data->hw_data->hws[clkid])
+	for (clkid = 0; clkid < data->hw_clks.num; clkid++) {
+		if (!data->hw_clks.hws[clkid])
 			continue;
 
-		ret = devm_clk_hw_register(dev, data->hw_data->hws[clkid]);
+		ret = devm_clk_hw_register(dev, data->hw_clks.hws[clkid]);
 		if (ret) {
 			dev_err(dev, "Clock registration failed\n");
 			return ret;
 		}
 	}
 
-	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
-		(void *) data->hw_data);
+	return devm_of_clk_add_hw_provider(dev, meson_clk_hw_get, (void *)&data->hw_clks);
 }
 EXPORT_SYMBOL_GPL(meson_aoclkc_probe);
 MODULE_LICENSE("GPL v2");

drivers/clk/meson/meson-aoclk.h

@@ -17,6 +17,7 @@
 #include <linux/reset-controller.h>
 
 #include "clk-regmap.h"
+#include "meson-clkc-utils.h"
 
 struct meson_aoclk_data {
 	const unsigned int			reset_reg;
@@ -24,7 +25,7 @@ struct meson_aoclk_data {
 	const unsigned int			*reset;
 	const int				num_clks;
 	struct clk_regmap			**clks;
-	const struct clk_hw_onecell_data	*hw_data;
+	struct meson_clk_hw_data		hw_clks;
 };
 
 struct meson_aoclk_reset_controller {

drivers/clk/meson/meson-clkc-utils.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org>
+ */
+
+#include <linux/of_device.h>
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include "meson-clkc-utils.h"
+
+struct clk_hw *meson_clk_hw_get(struct of_phandle_args *clkspec, void *clk_hw_data)
+{
+	const struct meson_clk_hw_data *data = clk_hw_data;
+	unsigned int idx = clkspec->args[0];
+
+	if (idx >= data->num) {
+		pr_err("%s: invalid index %u\n", __func__, idx);
+		return ERR_PTR(-EINVAL);
+	}
+
+	return data->hws[idx];
+}
+EXPORT_SYMBOL_GPL(meson_clk_hw_get);
+
+MODULE_LICENSE("GPL");

drivers/clk/meson/meson-clkc-utils.h

+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org>
+ */
+
+#ifndef __MESON_CLKC_UTILS_H__
+#define __MESON_CLKC_UTILS_H__
+
+#include <linux/of_device.h>
+#include <linux/clk-provider.h>
+
+struct meson_clk_hw_data {
+	struct clk_hw	**hws;
+	unsigned int	num;
+};
+
+struct clk_hw *meson_clk_hw_get(struct of_phandle_args *clkspec, void *clk_hw_data);
+
+#endif

drivers/clk/meson/meson-eeclk.c

@@ -43,20 +43,19 @@ int meson_eeclkc_probe(struct platform_device *pdev)
 	for (i = 0; i < data->regmap_clk_num; i++)
 		data->regmap_clks[i]->map = map;
 
-	for (i = 0; i < data->hw_onecell_data->num; i++) {
+	for (i = 0; i < data->hw_clks.num; i++) {
 		/* array might be sparse */
-		if (!data->hw_onecell_data->hws[i])
+		if (!data->hw_clks.hws[i])
 			continue;
 
-		ret = devm_clk_hw_register(dev, data->hw_onecell_data->hws[i]);
+		ret = devm_clk_hw_register(dev, data->hw_clks.hws[i]);
 		if (ret) {
 			dev_err(dev, "Clock registration failed\n");
 			return ret;
 		}
 	}
 
-	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
-					   data->hw_onecell_data);
+	return devm_of_clk_add_hw_provider(dev, meson_clk_hw_get, (void *)&data->hw_clks);
 }
 EXPORT_SYMBOL_GPL(meson_eeclkc_probe);
 MODULE_LICENSE("GPL v2");

drivers/clk/meson/meson-eeclk.h

@@ -9,6 +9,7 @@
 
 #include <linux/clk-provider.h>
 #include "clk-regmap.h"
+#include "meson-clkc-utils.h"
 
 struct platform_device;
 
@@ -17,7 +18,7 @@ struct meson_eeclkc_data {
 	unsigned int			regmap_clk_num;
 	const struct reg_sequence	*init_regs;
 	unsigned int			init_count;
-	struct clk_hw_onecell_data	*hw_onecell_data;
+	struct meson_clk_hw_data	hw_clks;
 };
 
 int meson_eeclkc_probe(struct platform_device *pdev);

drivers/clk/meson/meson8b.h

@@ -77,121 +77,4 @@
 #define HHI_MPLL_CNTL9			0x2A0 /* 0xa8 offset in data sheet */
 #define HHI_MPLL_CNTL10			0x2A4 /* 0xa9 offset in data sheet */
 
-/*
- * CLKID index values
- *
- * These indices are entirely contrived and do not map onto the hardware.
- * It has now been decided to expose everything by default in the DT header:
- * include/dt-bindings/clock/gxbb-clkc.h. Only the clocks ids we don't want
- * to expose, such as the internal muxes and dividers of composite clocks,
- * will remain defined here.
- */
-
-#define CLKID_MPLL0_DIV		96
-#define CLKID_MPLL1_DIV		97
-#define CLKID_MPLL2_DIV		98
-#define CLKID_CPU_IN_SEL	99
-#define CLKID_CPU_IN_DIV2	100
-#define CLKID_CPU_IN_DIV3	101
-#define CLKID_CPU_SCALE_DIV	102
-#define CLKID_CPU_SCALE_OUT_SEL	103
-#define CLKID_MPLL_PREDIV	104
-#define CLKID_FCLK_DIV2_DIV	105
-#define CLKID_FCLK_DIV3_DIV	106
-#define CLKID_FCLK_DIV4_DIV	107
-#define CLKID_FCLK_DIV5_DIV	108
-#define CLKID_FCLK_DIV7_DIV	109
-#define CLKID_NAND_SEL		110
-#define CLKID_NAND_DIV		111
-#define CLKID_PLL_FIXED_DCO	113
-#define CLKID_HDMI_PLL_DCO	114
-#define CLKID_PLL_SYS_DCO	115
-#define CLKID_CPU_CLK_DIV2	116
-#define CLKID_CPU_CLK_DIV3	117
-#define CLKID_CPU_CLK_DIV4	118
-#define CLKID_CPU_CLK_DIV5	119
-#define CLKID_CPU_CLK_DIV6	120
-#define CLKID_CPU_CLK_DIV7	121
-#define CLKID_CPU_CLK_DIV8	122
-#define CLKID_APB_SEL		123
-#define CLKID_PERIPH_SEL	125
-#define CLKID_AXI_SEL		127
-#define CLKID_L2_DRAM_SEL	129
-#define CLKID_HDMI_PLL_LVDS_OUT 131
-#define CLKID_VID_PLL_IN_SEL	133
-#define CLKID_VID_PLL_IN_EN	134
-#define CLKID_VID_PLL_PRE_DIV	135
-#define CLKID_VID_PLL_POST_DIV	136
-#define CLKID_VCLK_IN_EN	139
-#define CLKID_VCLK_DIV1		140
-#define CLKID_VCLK_DIV2_DIV	141
-#define CLKID_VCLK_DIV2		142
-#define CLKID_VCLK_DIV4_DIV	143
-#define CLKID_VCLK_DIV4		144
-#define CLKID_VCLK_DIV6_DIV	145
-#define CLKID_VCLK_DIV6		146
-#define CLKID_VCLK_DIV12_DIV	147
-#define CLKID_VCLK_DIV12	148
-#define CLKID_VCLK2_IN_EN	150
-#define CLKID_VCLK2_DIV1	151
-#define CLKID_VCLK2_DIV2_DIV	152
-#define CLKID_VCLK2_DIV2	153
-#define CLKID_VCLK2_DIV4_DIV	154
-#define CLKID_VCLK2_DIV4	155
-#define CLKID_VCLK2_DIV6_DIV	156
-#define CLKID_VCLK2_DIV6	157
-#define CLKID_VCLK2_DIV12_DIV	158
-#define CLKID_VCLK2_DIV12	159
-#define CLKID_CTS_ENCT_SEL	160
-#define CLKID_CTS_ENCP_SEL	162
-#define CLKID_CTS_ENCI_SEL	164
-#define CLKID_HDMI_TX_PIXEL_SEL	166
-#define CLKID_CTS_ENCL_SEL	168
-#define CLKID_CTS_VDAC0_SEL	170
-#define CLKID_HDMI_SYS_SEL	172
-#define CLKID_HDMI_SYS_DIV	173
-#define CLKID_MALI_0_SEL	175
-#define CLKID_MALI_0_DIV	176
-#define CLKID_MALI_0		177
-#define CLKID_MALI_1_SEL	178
-#define CLKID_MALI_1_DIV	179
-#define CLKID_MALI_1		180
-#define CLKID_GP_PLL_DCO	181
-#define CLKID_GP_PLL		182
-#define CLKID_VPU_0_SEL		183
-#define CLKID_VPU_0_DIV		184
-#define CLKID_VPU_0		185
-#define CLKID_VPU_1_SEL		186
-#define CLKID_VPU_1_DIV		187
-#define CLKID_VPU_1		189
-#define CLKID_VDEC_1_SEL	191
-#define CLKID_VDEC_1_1_DIV	192
-#define CLKID_VDEC_1_1		193
-#define CLKID_VDEC_1_2_DIV	194
-#define CLKID_VDEC_1_2		195
-#define CLKID_VDEC_HCODEC_SEL	197
-#define CLKID_VDEC_HCODEC_DIV	198
-#define CLKID_VDEC_2_SEL	200
-#define CLKID_VDEC_2_DIV	201
-#define CLKID_VDEC_HEVC_SEL	203
-#define CLKID_VDEC_HEVC_DIV	204
-#define CLKID_VDEC_HEVC_EN	205
-#define CLKID_CTS_AMCLK_SEL	207
-#define CLKID_CTS_AMCLK_DIV	208
-#define CLKID_CTS_MCLK_I958_SEL	210
-#define CLKID_CTS_MCLK_I958_DIV	211
-#define CLKID_VCLK_EN		214
-#define CLKID_VCLK2_EN		215
-#define CLKID_VID_PLL_LVDS_EN	216
-#define CLKID_HDMI_PLL_DCO_IN   217
-
-#define CLK_NR_CLKS		218
-
-/*
- * include the CLKID and RESETID that have
- * been made part of the stable DT binding
- */
-#include <dt-bindings/clock/meson8b-clkc.h>
-#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
-
 #endif /* __MESON8B_H */

include/dt-bindings/clock/amlogic,a1-peripherals-clkc.h

@@ -10,6 +10,7 @@
 #ifndef __A1_PERIPHERALS_CLKC_H
 #define __A1_PERIPHERALS_CLKC_H
 
+#define CLKID_XTAL_IN		0
 #define CLKID_FIXPLL_IN		1
 #define CLKID_USB_PHY_IN	2
 #define CLKID_USB_CTRL_IN	3
@@ -70,6 +71,8 @@
 #define CLKID_CPU_CTRL		58
 #define CLKID_ROM		59
 #define CLKID_PROC_I2C		60
+#define CLKID_DSPA_SEL		61
+#define CLKID_DSPB_SEL		62
 #define CLKID_DSPA_EN		63
 #define CLKID_DSPA_EN_NIC	64
 #define CLKID_DSPB_EN		65
@@ -81,6 +84,7 @@
 #define CLKID_12M		71
 #define CLKID_FCLK_DIV2_DIVN	72
 #define CLKID_GEN		73
+#define CLKID_SARADC_SEL	74
 #define CLKID_SARADC		75
 #define CLKID_PWM_A		76
 #define CLKID_PWM_B		77
@@ -95,21 +99,70 @@
 #define CLKID_SD_EMMC		86
 #define CLKID_PSRAM		87
 #define CLKID_DMC		88
+#define CLKID_SYS_A_SEL		89
+#define CLKID_SYS_A_DIV		90
+#define CLKID_SYS_A		91
+#define CLKID_SYS_B_SEL		92
+#define CLKID_SYS_B_DIV		93
+#define CLKID_SYS_B		94
 #define CLKID_DSPA_A_SEL	95
+#define CLKID_DSPA_A_DIV	96
+#define CLKID_DSPA_A		97
 #define CLKID_DSPA_B_SEL	98
+#define CLKID_DSPA_B_DIV	99
+#define CLKID_DSPA_B		100
 #define CLKID_DSPB_A_SEL	101
+#define CLKID_DSPB_A_DIV	102
+#define CLKID_DSPB_A		103
 #define CLKID_DSPB_B_SEL	104
+#define CLKID_DSPB_B_DIV	105
+#define CLKID_DSPB_B		106
+#define CLKID_RTC_32K_IN	107
+#define CLKID_RTC_32K_DIV	108
+#define CLKID_RTC_32K_XTAL	109
+#define CLKID_RTC_32K_SEL	110
+#define CLKID_CECB_32K_IN	111
+#define CLKID_CECB_32K_DIV	112
 #define CLKID_CECB_32K_SEL_PRE	113
 #define CLKID_CECB_32K_SEL	114
+#define CLKID_CECA_32K_IN	115
+#define CLKID_CECA_32K_DIV	116
 #define CLKID_CECA_32K_SEL_PRE	117
 #define CLKID_CECA_32K_SEL	118
+#define CLKID_DIV2_PRE		119
+#define CLKID_24M_DIV2		120
 #define CLKID_GEN_SEL		121
+#define CLKID_GEN_DIV		122
+#define CLKID_SARADC_DIV	123
 #define CLKID_PWM_A_SEL		124
+#define CLKID_PWM_A_DIV		125
 #define CLKID_PWM_B_SEL		126
+#define CLKID_PWM_B_DIV		127
 #define CLKID_PWM_C_SEL		128
+#define CLKID_PWM_C_DIV		129
 #define CLKID_PWM_D_SEL		130
+#define CLKID_PWM_D_DIV		131
 #define CLKID_PWM_E_SEL		132
+#define CLKID_PWM_E_DIV		133
 #define CLKID_PWM_F_SEL		134
+#define CLKID_PWM_F_DIV		135
+#define CLKID_SPICC_SEL		136
+#define CLKID_SPICC_DIV		137
+#define CLKID_SPICC_SEL2	138
+#define CLKID_TS_DIV		139
+#define CLKID_SPIFC_SEL		140
+#define CLKID_SPIFC_DIV		141
+#define CLKID_SPIFC_SEL2	142
+#define CLKID_USB_BUS_SEL	143
+#define CLKID_USB_BUS_DIV	144
+#define CLKID_SD_EMMC_SEL	145
+#define CLKID_SD_EMMC_DIV	146
 #define CLKID_SD_EMMC_SEL2	147
+#define CLKID_PSRAM_SEL		148
+#define CLKID_PSRAM_DIV		149
+#define CLKID_PSRAM_SEL2	150
+#define CLKID_DMC_SEL		151
+#define CLKID_DMC_DIV		152
+#define CLKID_DMC_SEL2		153
 
 #endif /* __A1_PERIPHERALS_CLKC_H */

include/dt-bindings/clock/amlogic,a1-pll-clkc.h

@@ -10,7 +10,12 @@
 #ifndef __A1_PLL_CLKC_H
 #define __A1_PLL_CLKC_H
 
+#define CLKID_FIXED_PLL_DCO	0
 #define CLKID_FIXED_PLL		1
+#define CLKID_FCLK_DIV2_DIV	2
+#define CLKID_FCLK_DIV3_DIV	3
+#define CLKID_FCLK_DIV5_DIV	4
+#define CLKID_FCLK_DIV7_DIV	5
 #define CLKID_FCLK_DIV2		6
 #define CLKID_FCLK_DIV3		7
 #define CLKID_FCLK_DIV5		8

include/dt-bindings/clock/axg-audio-clkc.h

@@ -37,6 +37,26 @@
 #define AUD_CLKID_SPDIFIN_CLK		56
 #define AUD_CLKID_PDM_DCLK		57
 #define AUD_CLKID_PDM_SYSCLK		58
+#define AUD_CLKID_MST_A_MCLK_SEL	59
+#define AUD_CLKID_MST_B_MCLK_SEL	60
+#define AUD_CLKID_MST_C_MCLK_SEL	61
+#define AUD_CLKID_MST_D_MCLK_SEL	62
+#define AUD_CLKID_MST_E_MCLK_SEL	63
+#define AUD_CLKID_MST_F_MCLK_SEL	64
+#define AUD_CLKID_MST_A_MCLK_DIV	65
+#define AUD_CLKID_MST_B_MCLK_DIV	66
+#define AUD_CLKID_MST_C_MCLK_DIV	67
+#define AUD_CLKID_MST_D_MCLK_DIV	68
+#define AUD_CLKID_MST_E_MCLK_DIV	69
+#define AUD_CLKID_MST_F_MCLK_DIV	70
+#define AUD_CLKID_SPDIFOUT_CLK_SEL	71
+#define AUD_CLKID_SPDIFOUT_CLK_DIV	72
+#define AUD_CLKID_SPDIFIN_CLK_SEL	73
+#define AUD_CLKID_SPDIFIN_CLK_DIV	74
+#define AUD_CLKID_PDM_DCLK_SEL		75
+#define AUD_CLKID_PDM_DCLK_DIV		76
+#define AUD_CLKID_PDM_SYSCLK_SEL	77
+#define AUD_CLKID_PDM_SYSCLK_DIV	78
 #define AUD_CLKID_MST_A_SCLK		79
 #define AUD_CLKID_MST_B_SCLK		80
 #define AUD_CLKID_MST_C_SCLK		81
@@ -49,6 +69,30 @@
 #define AUD_CLKID_MST_D_LRCLK		89
 #define AUD_CLKID_MST_E_LRCLK		90
 #define AUD_CLKID_MST_F_LRCLK		91
+#define AUD_CLKID_MST_A_SCLK_PRE_EN	92
+#define AUD_CLKID_MST_B_SCLK_PRE_EN	93
+#define AUD_CLKID_MST_C_SCLK_PRE_EN	94
+#define AUD_CLKID_MST_D_SCLK_PRE_EN	95
+#define AUD_CLKID_MST_E_SCLK_PRE_EN	96
+#define AUD_CLKID_MST_F_SCLK_PRE_EN	97
+#define AUD_CLKID_MST_A_SCLK_DIV	98
+#define AUD_CLKID_MST_B_SCLK_DIV	99
+#define AUD_CLKID_MST_C_SCLK_DIV	100
+#define AUD_CLKID_MST_D_SCLK_DIV	101
+#define AUD_CLKID_MST_E_SCLK_DIV	102
+#define AUD_CLKID_MST_F_SCLK_DIV	103
+#define AUD_CLKID_MST_A_SCLK_POST_EN	104
+#define AUD_CLKID_MST_B_SCLK_POST_EN	105
+#define AUD_CLKID_MST_C_SCLK_POST_EN	106
+#define AUD_CLKID_MST_D_SCLK_POST_EN	107
+#define AUD_CLKID_MST_E_SCLK_POST_EN	108
+#define AUD_CLKID_MST_F_SCLK_POST_EN	109
+#define AUD_CLKID_MST_A_LRCLK_DIV	110
+#define AUD_CLKID_MST_B_LRCLK_DIV	111
+#define AUD_CLKID_MST_C_LRCLK_DIV	112
+#define AUD_CLKID_MST_D_LRCLK_DIV	113
+#define AUD_CLKID_MST_E_LRCLK_DIV	114
+#define AUD_CLKID_MST_F_LRCLK_DIV	115
 #define AUD_CLKID_TDMIN_A_SCLK_SEL	116
 #define AUD_CLKID_TDMIN_B_SCLK_SEL	117
 #define AUD_CLKID_TDMIN_C_SCLK_SEL	118
@@ -70,8 +114,24 @@
 #define AUD_CLKID_TDMOUT_A_LRCLK	134
 #define AUD_CLKID_TDMOUT_B_LRCLK	135
 #define AUD_CLKID_TDMOUT_C_LRCLK	136
+#define AUD_CLKID_TDMIN_A_SCLK_PRE_EN	137
+#define AUD_CLKID_TDMIN_B_SCLK_PRE_EN	138
+#define AUD_CLKID_TDMIN_C_SCLK_PRE_EN	139
+#define AUD_CLKID_TDMIN_LB_SCLK_PRE_EN	140
+#define AUD_CLKID_TDMOUT_A_SCLK_PRE_EN	141
+#define AUD_CLKID_TDMOUT_B_SCLK_PRE_EN	142
+#define AUD_CLKID_TDMOUT_C_SCLK_PRE_EN	143
+#define AUD_CLKID_TDMIN_A_SCLK_POST_EN	144
+#define AUD_CLKID_TDMIN_B_SCLK_POST_EN	145
+#define AUD_CLKID_TDMIN_C_SCLK_POST_EN	146
+#define AUD_CLKID_TDMIN_LB_SCLK_POST_EN	147
+#define AUD_CLKID_TDMOUT_A_SCLK_POST_EN	148
+#define AUD_CLKID_TDMOUT_B_SCLK_POST_EN	149
+#define AUD_CLKID_TDMOUT_C_SCLK_POST_EN	150
 #define AUD_CLKID_SPDIFOUT_B		151
 #define AUD_CLKID_SPDIFOUT_B_CLK	152
+#define AUD_CLKID_SPDIFOUT_B_CLK_SEL	153
+#define AUD_CLKID_SPDIFOUT_B_CLK_DIV	154
 #define AUD_CLKID_TDM_MCLK_PAD0		155
 #define AUD_CLKID_TDM_MCLK_PAD1		156
 #define AUD_CLKID_TDM_LRCLK_PAD0	157
@@ -90,5 +150,10 @@
 #define AUD_CLKID_FRDDR_D		170
 #define AUD_CLKID_TODDR_D		171
 #define AUD_CLKID_LOOPBACK_B		172
+#define AUD_CLKID_CLK81_EN		173
+#define AUD_CLKID_SYSCLK_A_DIV		174
+#define AUD_CLKID_SYSCLK_B_DIV		175
+#define AUD_CLKID_SYSCLK_A_EN		176
+#define AUD_CLKID_SYSCLK_B_EN		177
 
 #endif /* __AXG_AUDIO_CLKC_BINDINGS_H */

include/dt-bindings/clock/axg-clkc.h

@@ -16,6 +16,8 @@
 #define CLKID_FCLK_DIV5				5
 #define CLKID_FCLK_DIV7				6
 #define CLKID_GP0_PLL				7
+#define CLKID_MPEG_SEL				8
+#define CLKID_MPEG_DIV				9
 #define CLKID_CLK81				10
 #define CLKID_MPLL0				11
 #define CLKID_MPLL1				12
@@ -67,23 +69,66 @@
 #define CLKID_AO_I2C				58
 #define CLKID_SD_EMMC_B_CLK0			59
 #define CLKID_SD_EMMC_C_CLK0			60
+#define CLKID_SD_EMMC_B_CLK0_SEL		61
+#define CLKID_SD_EMMC_B_CLK0_DIV		62
+#define CLKID_SD_EMMC_C_CLK0_SEL		63
+#define CLKID_SD_EMMC_C_CLK0_DIV		64
+#define CLKID_MPLL0_DIV				65
+#define CLKID_MPLL1_DIV				66
+#define CLKID_MPLL2_DIV				67
+#define CLKID_MPLL3_DIV				68
 #define CLKID_HIFI_PLL				69
+#define CLKID_MPLL_PREDIV			70
+#define CLKID_FCLK_DIV2_DIV			71
+#define CLKID_FCLK_DIV3_DIV			72
+#define CLKID_FCLK_DIV4_DIV			73
+#define CLKID_FCLK_DIV5_DIV			74
+#define CLKID_FCLK_DIV7_DIV			75
+#define CLKID_PCIE_PLL				76
+#define CLKID_PCIE_MUX				77
+#define CLKID_PCIE_REF				78
 #define CLKID_PCIE_CML_EN0			79
 #define CLKID_PCIE_CML_EN1			80
+#define CLKID_GEN_CLK_SEL			82
+#define CLKID_GEN_CLK_DIV			83
 #define CLKID_GEN_CLK				84
+#define CLKID_SYS_PLL_DCO			85
+#define CLKID_FIXED_PLL_DCO			86
+#define CLKID_GP0_PLL_DCO			87
+#define CLKID_HIFI_PLL_DCO			88
+#define CLKID_PCIE_PLL_DCO			89
+#define CLKID_PCIE_PLL_OD			90
+#define CLKID_VPU_0_DIV				91
 #define CLKID_VPU_0_SEL				92
 #define CLKID_VPU_0				93
+#define CLKID_VPU_1_DIV				94
 #define CLKID_VPU_1_SEL				95
 #define CLKID_VPU_1				96
 #define CLKID_VPU				97
+#define CLKID_VAPB_0_DIV			98
 #define CLKID_VAPB_0_SEL			99
 #define CLKID_VAPB_0				100
+#define CLKID_VAPB_1_DIV			101
 #define CLKID_VAPB_1_SEL			102
 #define CLKID_VAPB_1				103
 #define CLKID_VAPB_SEL				104
 #define CLKID_VAPB				105
 #define CLKID_VCLK				106
 #define CLKID_VCLK2				107
+#define CLKID_VCLK_SEL				108
+#define CLKID_VCLK2_SEL				109
+#define CLKID_VCLK_INPUT			110
+#define CLKID_VCLK2_INPUT			111
+#define CLKID_VCLK_DIV				112
+#define CLKID_VCLK2_DIV				113
+#define CLKID_VCLK_DIV2_EN			114
+#define CLKID_VCLK_DIV4_EN			115
+#define CLKID_VCLK_DIV6_EN			116
+#define CLKID_VCLK_DIV12_EN			117
+#define CLKID_VCLK2_DIV2_EN			118
+#define CLKID_VCLK2_DIV4_EN			119
+#define CLKID_VCLK2_DIV6_EN			120
+#define CLKID_VCLK2_DIV12_EN			121
 #define CLKID_VCLK_DIV1				122
 #define CLKID_VCLK_DIV2				123
 #define CLKID_VCLK_DIV4				124
@@ -94,7 +139,10 @@
 #define CLKID_VCLK2_DIV4			129
 #define CLKID_VCLK2_DIV6			130
 #define CLKID_VCLK2_DIV12			131
+#define CLKID_CTS_ENCL_SEL			132
 #define CLKID_CTS_ENCL				133
+#define CLKID_VDIN_MEAS_SEL			134
+#define CLKID_VDIN_MEAS_DIV			135
 #define CLKID_VDIN_MEAS				136
 
 #endif /* __AXG_CLKC_H */

include/dt-bindings/clock/g12a-aoclkc.h

@@ -26,10 +26,17 @@
 #define CLKID_AO_M4_FCLK	13
 #define CLKID_AO_M4_HCLK	14
 #define CLKID_AO_CLK81		15
+#define CLKID_AO_SAR_ADC_DIV	17
 #define CLKID_AO_SAR_ADC_SEL	16
 #define CLKID_AO_SAR_ADC_CLK	18
 #define CLKID_AO_CTS_OSCIN	19
+#define CLKID_AO_32K_PRE	20
+#define CLKID_AO_32K_DIV	21
+#define CLKID_AO_32K_SEL	22
 #define CLKID_AO_32K		23
+#define CLKID_AO_CEC_PRE	24
+#define CLKID_AO_CEC_DIV	25
+#define CLKID_AO_CEC_SEL	26
 #define CLKID_AO_CEC		27
 #define CLKID_AO_CTS_RTC_OSCIN	28